(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 23/2 to 7:00 (MYT) 24/2/2025. We apologize for the inconvenience.
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Jector Punches for Heavy Load Lapping (Part Numbers)

Jector Punches for Heavy Load Lapping

Click this image to zoom it.

Move the mouse over the image to zoom

This is a jetter punch for punching thick plates with a lap finish on the cutting edge to improve the roughness of the cutting edge surface. Recommended when there is a concern about damage to the punch brim, such as when punching high-tensile steel materials.

  • FLANGE
  • POWDER HSS

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
L-APJVEL16-[70-100/10]-P[6-15.97/0.001]-W[6-15.97/0.001]
L-APJVEL16-LC[47-99.9/0.1]-P[6-15.97/0.001]-W[6-15.97/0.001]
L-APJVEL20-[70-100/10]-P[6-19.97/0.001]-W[6-19.97/0.001]
L-APJVEL20-LC[47-99.9/0.1]-P[6-19.97/0.001]-W[6-19.97/0.001]
L-APJVEL25-[70-100/10]-P[6-24.97/0.001]-W[6-24.97/0.001]
L-APJVEL25-LC[47-99.9/0.1]-P[6-24.97/0.001]-W[6-24.97/0.001]
L-APJVES8-[50-100/10]-P[4-7.97/0.001]-W[4-7.97/0.001]
L-APJVES8-LC[44-99.9/0.1]-P[4-7.97/0.001]-W[4-7.97/0.001]
L-APJVES10-[50-100/10]-P[5-9.97/0.001]-W[5-9.97/0.001]
L-APJVES10-LC[44-99.9/0.1]-P[5-9.97/0.001]-W[5-9.97/0.001]
L-APJVES13-[50-100/10]-P[6-12.97/0.001]-W[6-12.97/0.001]
L-APJVES13-LC[44-99.9/0.1]-P[6-12.97/0.001]-W[6-12.97/0.001]
L-APJVES16-[50-100/10]-P[6-15.97/0.001]-W[6-15.97/0.001]
L-APJVES16-LC[44-99.9/0.1]-P[6-15.97/0.001]-W[6-15.97/0.001]
L-APJVES20-[50-100/10]-P[6-19.97/0.001]-W[6-19.97/0.001]
L-APJVES20-LC[44-99.9/0.1]-P[6-19.97/0.001]-W[6-19.97/0.001]
L-APJVES25-[50-100/10]-P[6-24.97/0.001]-W[6-24.97/0.001]
L-APJVES25-LC[44-99.9/0.1]-P[6-24.97/0.001]-W[6-24.97/0.001]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSJector Tip shape Shank diameter D tolerance B (Tip length) D (Shank diameter)
(mm)
P (Tip dimension)
(mm)
L (L dimension)
(mm)
LC (Full length alteration)
(mm)
W (Tip dimension)
(mm)

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5L166 ~ 15.9770 ~ 100-6 ~ 15.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5L166 ~ 15.97-47 ~ 99.96 ~ 15.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5L206 ~ 19.9770 ~ 100-6 ~ 19.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5L206 ~ 19.97-47 ~ 99.96 ~ 19.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5L256 ~ 24.9770 ~ 100-6 ~ 24.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5L256 ~ 24.97-47 ~ 99.96 ~ 24.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S84 ~ 7.9750 ~ 100-4 ~ 7.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S84 ~ 7.97-44 ~ 99.94 ~ 7.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S105 ~ 9.9750 ~ 100-5 ~ 9.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S105 ~ 9.97-44 ~ 99.95 ~ 9.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S136 ~ 12.9750 ~ 100-6 ~ 12.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S136 ~ 12.97-44 ~ 99.96 ~ 12.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S166 ~ 15.9750 ~ 100-6 ~ 15.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S166 ~ 15.97-44 ~ 99.96 ~ 15.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S206 ~ 19.9750 ~ 100-6 ~ 19.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S206 ~ 19.97-44 ~ 99.96 ~ 19.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S256 ~ 24.9750 ~ 100-6 ~ 24.97

-

1 Piece(s) 6 Day(s) or more 10Spring and pin reinforced typeEm5S256 ~ 24.97-44 ~ 99.96 ~ 24.97
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSJector Tip shape Shank diameter D tolerance B (Tip length) D (Shank diameter)
(mm)
P (Tip dimension)
(mm)
L (L dimension)
(mm)
LC (Full length alteration)
(mm)
W (Tip dimension)
(mm)

Loading...

Basic Information

Heavy-load punches Yes Shank type Single-stepped Material Powdered high-speed steel
Surface treatment Lapping Shank (mounting part) shape Standard T (Head thickness/plate thickness)(mm) 8

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Press
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time