(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Click this image to zoom it.

Die steel SKD61 + nitrided, tip machined straight center pin with specified shaft diameter (P) 0.01mm.

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPJG-5LB15-[50-500/0.01]-P[12-14.9/0.1]
CPJG-5LB16-[50-500/0.01]-P[15-15.9/0.1]
CPJG-5LC15-[50-500/0.01]-P[12-14.9/0.1]-C[0.1-7.4/0.1]
CPJG-5LC16-[50-500/0.01]-P[15-15.9/0.1]-C[0.1-7.9/0.1]
CPJG-5LG15-[50-500/0.01]-P[12-14.9/0.1]-K[45-89/1]
CPJG-5LG16-[50-500/0.01]-P[15-15.9/0.1]-K[45-89/1]
CPJG-5LR15-[50-500/0.01]-P[12-14.9/0.1]-R[0.2-7.4/0.1]
CPJG-5LR16-[50-500/0.01]-P[15-15.9/0.1]-R[0.2-7.9/0.1]
CPJG-5LT15-[50-500/0.01]-P[12-14.9/0.1]-S[0.1-30/0.1]-K[1-45/1]
CPJG-5LT16-[50-500/0.01]-P[15-15.9/0.1]-S[0.1-32/0.1]-K[1-45/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape No. (Nominal diameter)
(mm)
C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9B15--50 ~ 500--

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9B16--50 ~ 500--

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9C150.1 ~ 7.4-50 ~ 500--

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9C160.1 ~ 7.9-50 ~ 500--

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9G15-45 ~ 8950 ~ 500--

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9G16-45 ~ 8950 ~ 500--

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9R15--50 ~ 5000.2 ~ 7.4-

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9R16--50 ~ 5000.2 ~ 7.9-

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)12 ~ 14.9T15-1 ~ 4550 ~ 500-0.1 ~ 30

-

1 Piece(s) 6 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)15 ~ 15.9T16-1 ~ 4550 ~ 500-0.1 ~ 32
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Tip shape No. (Nominal diameter)
(mm)
C (C chamfering width on the tip)
(mm)
K (Taper angle)
(°)
L (L dimension)
(mm)
R (Tip R chamfering)
(mm)
S (Tip tapered width)
(mm)

Loading...

  1. 1

Basic Information

Material SKD61 Surface treatment Nitrided With/without cooling hole No
Applicable ejector sleeves inner diameter tolerance +0.01/0 or H7

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time