(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 23/2 to 7:00 (MYT) 24/2/2025. We apologize for the inconvenience.
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Taperless One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Taperless One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

Click this image to zoom it.

Taperless 1-stage center pin with die steel SKD61 + nitriding and shaft diameter (P) 0.1mm specified type.

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPJSG-5B4-[70-500/0.01]-P[3.5-3.99/0.01]-F[50-499.5/0.01]-A[1-3.99/0.01]
CPJSG-5B4.5-[70-500/0.01]-P[4-4.49/0.01]-F[50-499.5/0.01]-A[1.5-4.49/0.01]
CPJSG-5B5-[70-500/0.01]-P[4.5-4.99/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]
CPJSG-5B5.5-[70-500/0.01]-P[5-5.49/0.01]-F[50-499.5/0.01]-A[2-5.49/0.01]
CPJSG-5B6-[70-600/0.01]-P[5.5-5.99/0.01]-F[50-599.5/0.01]-A[2-5.99/0.01]
CPJSG-5B6.5-[70-600/0.01]-P[6-6.49/0.01]-F[50-599.5/0.01]-A[2-6.49/0.01]
CPJSG-5B7-[70-600/0.01]-P[6.5-6.99/0.01]-F[50-599.5/0.01]-A[2-6.99/0.01]
CPJSG-5B8-[70-600/0.01]-P[7-7.99/0.01]-F[50-599.5/0.01]-A[2-7.99/0.01]
CPJSG-5B10-[70-600/0.01]-P[8-9.99/0.01]-F[50-599.5/0.01]-A[2-9.99/0.01]
CPJSG-5B12-[70-700/0.01]-P[10-11.99/0.01]-F[50-699.5/0.01]-A[2-11.99/0.01]
CPJSG-5B15-[70-700/0.01]-P[10-14.99/0.01]-F[50-699.5/0.01]-A[2-14.99/0.01]
CPJSG-5B16-[70-700/0.01]-P[10-15.99/0.01]-F[50-699.5/0.01]-A[2.5-15.99/0.01]
CPJSG-5C4-[70-500/0.01]-P[3.5-3.99/0.01]-F[50-499.5/0.01]-A[1-3.99/0.01]
CPJSG-5C4.5-[70-500/0.01]-P[4-4.49/0.01]-F[50-499.5/0.01]-A[1.5-4.49/0.01]
CPJSG-5C5-[70-500/0.01]-P[4.5-4.99/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]
CPJSG-5C5.5-[70-500/0.01]-P[5-5.49/0.01]-F[50-499.5/0.01]-A[2-5.49/0.01]
CPJSG-5C6-[70-600/0.01]-P[5.5-5.99/0.01]-F[50-599.5/0.01]-A[2-5.99/0.01]
CPJSG-5C6.5-[70-600/0.01]-P[6-6.49/0.01]-F[50-599.5/0.01]-A[2-6.49/0.01]
CPJSG-5C7-[70-600/0.01]-P[6.5-6.99/0.01]-F[50-599.5/0.01]-A[2-6.99/0.01]
CPJSG-5C8-[70-600/0.01]-P[7-7.99/0.01]-F[50-599.5/0.01]-A[2-7.99/0.01]
CPJSG-5C10-[70-600/0.01]-P[8-9.99/0.01]-F[50-599.5/0.01]-A[2-9.99/0.01]
CPJSG-5C12-[70-700/0.01]-P[10-11.99/0.01]-F[50-699.5/0.01]-A[2-11.99/0.01]
CPJSG-5C15-[70-700/0.01]-P[10-14.99/0.01]-F[50-699.5/0.01]-A[2-14.99/0.01]
CPJSG-5C16-[70-700/0.01]-P[10-15.99/0.01]-F[50-699.5/0.01]-A[2.5-15.99/0.01]
CPJSG-5D4-[70-500/0.01]-P[3.5-3.99/0.01]-F[50-499.5/0.01]-A[1-3.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D4.5-[70-500/0.01]-P[4-4.49/0.01]-F[50-499.5/0.01]-A[1.5-4.49/0.01]-C[0.1-1.5/0.1]
CPJSG-5D5-[70-500/0.01]-P[4.5-4.99/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D5.5-[70-500/0.01]-P[5-5.49/0.01]-F[50-499.5/0.01]-A[2-5.49/0.01]-C[0.1-1.5/0.1]
CPJSG-5D6-[70-600/0.01]-P[5.5-5.99/0.01]-F[50-599.5/0.01]-A[2-5.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D6.5-[70-600/0.01]-P[6-6.49/0.01]-F[50-599.5/0.01]-A[2-6.49/0.01]-C[0.1-1.5/0.1]
CPJSG-5D7-[70-600/0.01]-P[6.5-6.99/0.01]-F[50-599.5/0.01]-A[2-6.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D8-[70-600/0.01]-P[7-7.99/0.01]-F[50-599.5/0.01]-A[2-7.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D10-[70-600/0.01]-P[8-9.99/0.01]-F[50-599.5/0.01]-A[2-9.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D12-[70-700/0.01]-P[10-11.99/0.01]-F[50-699.5/0.01]-A[2-11.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D15-[70-700/0.01]-P[10-14.99/0.01]-F[50-699.5/0.01]-A[2-14.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5D16-[70-700/0.01]-P[10-15.99/0.01]-F[50-699.5/0.01]-A[2.5-15.99/0.01]-C[0.1-1.5/0.1]
CPJSG-5E4-[70-500/0.01]-P[3.5-3.99/0.01]-F[50-499.5/0.01]-A[1-3.99/0.01]-R[0.2-1.5/0.1]
CPJSG-5E4.5-[70-500/0.01]-P[4-4.49/0.01]-F[50-499.5/0.01]-A[1.5-4.49/0.01]-R[0.2-1.5/0.1]
CPJSG-5E5-[70-500/0.01]-P[4.5-4.99/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]-R[0.2-1.7/0.1]
CPJSG-5E5.5-[70-500/0.01]-P[5-5.49/0.01]-F[50-499.5/0.01]-A[2-5.49/0.01]-R[0.2-2/0.1]
CPJSG-5E6-[70-600/0.01]-P[5.5-5.99/0.01]-F[50-599.5/0.01]-A[2-5.99/0.01]-R[0.2-2/0.1]
CPJSG-5E6.5-[70-600/0.01]-P[6-6.49/0.01]-F[50-599.5/0.01]-A[2-6.49/0.01]-R[0.2-2.2/0.1]
CPJSG-5E7-[70-600/0.01]-P[6.5-6.99/0.01]-F[50-599.5/0.01]-A[2-6.99/0.01]-R[0.2-2.5/0.1]
CPJSG-5E8-[70-600/0.01]-P[7-7.99/0.01]-F[50-599.5/0.01]-A[2-7.99/0.01]-R[0.2-3/0.1]
CPJSG-5E10-[70-600/0.01]-P[8-9.99/0.01]-F[50-599.5/0.01]-A[2-9.99/0.01]-R[0.2-4/0.1]
CPJSG-5E12-[70-700/0.01]-P[10-11.99/0.01]-F[50-699.5/0.01]-A[2-11.99/0.01]-R[0.3-5/0.1]
CPJSG-5E15-[70-700/0.01]-P[10-14.99/0.01]-F[50-699.5/0.01]-A[2-14.99/0.01]-R[0.3-5/0.1]
CPJSG-5E16-[70-700/0.01]-P[10-15.99/0.01]-F[50-699.5/0.01]-A[2.5-15.99/0.01]-R[0.3-5/0.1]
CPNSG-5B2-[70-300/0.01]-P[1.5-1.9/0.1]-F[50-299.5/0.01]-A[0.7-1.99/0.01]
CPNSG-5B2.5-[70-300/0.01]-P[2-2.49/0.01]-F[50-299.5/0.01]-A[0.7-2.49/0.01]
CPNSG-5B3-[70-400/0.01]-P[2.5-2.99/0.01]-F[50-399.5/0.01]-A[1-2.99/0.01]
CPNSG-5B3.5-[70-400/0.01]-P[3-3.49/0.01]-F[50-399.5/0.01]-A[1-3.49/0.01]
CPNSG-5B4-[70-400/0.01]-P[3.5-3.99/0.01]-F[50-399.5/0.01]-A[1-3.99/0.01]
CPNSG-5B4.5-[70-400/0.01]-P[4-4.49/0.01]-F[50-399.5/0.01]-A[1.5-4.49/0.01]
CPNSG-5B5-[70-500/0.01]-P[4.5-4.99/0.01]-F[50-499.5/0.01]-A[1.5-4.99/0.01]
CPNSG-5B5.5-[70-500/0.01]-P[5-5.49/0.01]-F[50-499.5/0.01]-A[1.5-5.49/0.01]
CPNSG-5B6-[70-500/0.01]-P[5.5-5.99/0.01]-F[50-499.5/0.01]-A[2-5.99/0.01]
CPNSG-5B6.5-[70-500/0.01]-P[6-6.49/0.01]-F[50-499.5/0.01]-A[2-6.49/0.01]
CPNSG-5B7-[70-500/0.01]-P[6.5-6.99/0.01]-F[50-499.5/0.01]-A[2-6.99/0.01]
CPNSG-5B8-[70-500/0.01]-P[7-7.99/0.01]-F[50-499.5/0.01]-A[2-7.99/0.01]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Step (Step shape) Shape (Tip shape) No. (Nominal diameter)
(mm)
A (Tip part)
(mm)
C (Tip part)
(mm)
F (Shaft diameter length)
(mm)
G (Tip C chamfering width on the tip part)
(mm)
K (Tip part angle)
(°)
L (L dimension)
(mm)
Q (Tip R chamfering on the tip part)
(mm)
R (Tip part)
(mm)
S (Tip tapered width on the tip part)
(mm)

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.023.5 ~ 3.99BNo processing41 ~ 3.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.024 ~ 4.49BNo processing4.51.5 ~ 4.49-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.024.5 ~ 4.99BNo processing51.5 ~ 4.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.025 ~ 5.49BNo processing5.52 ~ 5.49-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.025.5 ~ 5.99BNo processing62 ~ 5.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.026 ~ 6.49BNo processing6.52 ~ 6.49-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.026.5 ~ 6.99BNo processing72 ~ 6.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.027 ~ 7.99BNo processing82 ~ 7.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.028 ~ 9.99BNo processing102 ~ 9.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.0210 ~ 11.99BNo processing122 ~ 11.99-50 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 14.99BNo processing152 ~ 14.99-50 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-10 ~ 15.99BNo processing162.5 ~ 15.99-50 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)3.5 ~ 3.99CNo processing41 ~ 3.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)4 ~ 4.49CNo processing4.51.5 ~ 4.49-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)4.5 ~ 4.99CNo processing51.5 ~ 4.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)5 ~ 5.49CNo processing5.52 ~ 5.49-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)5.5 ~ 5.99CNo processing62 ~ 5.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)6 ~ 6.49CNo processing6.52 ~ 6.49-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)6.5 ~ 6.99CNo processing72 ~ 6.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)7 ~ 7.99CNo processing82 ~ 7.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)8 ~ 9.99CNo processing102 ~ 9.99-50 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 11.99CNo processing122 ~ 11.99-50 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 14.99CNo processing152 ~ 14.99-50 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 15.99CNo processing162.5 ~ 15.99-50 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)3.5 ~ 3.99DNo processing41 ~ 3.990.1 ~ 1.550 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)4 ~ 4.49DNo processing4.51.5 ~ 4.490.1 ~ 1.550 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)4.5 ~ 4.99DNo processing51.5 ~ 4.990.1 ~ 1.550 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)5 ~ 5.49DNo processing5.52 ~ 5.490.1 ~ 1.550 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)5.5 ~ 5.99DNo processing62 ~ 5.990.1 ~ 1.550 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)6 ~ 6.49DNo processing6.52 ~ 6.490.1 ~ 1.550 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)6.5 ~ 6.99DNo processing72 ~ 6.990.1 ~ 1.550 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)7 ~ 7.99DNo processing82 ~ 7.990.1 ~ 1.550 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)8 ~ 9.99DNo processing102 ~ 9.990.1 ~ 1.550 ~ 599.5--70 ~ 600---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 11.99DNo processing122 ~ 11.990.1 ~ 1.550 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 14.99DNo processing152 ~ 14.990.1 ~ 1.550 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 15.99DNo processing162.5 ~ 15.990.1 ~ 1.550 ~ 699.5--70 ~ 700---

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)3.5 ~ 3.99ENo processing41 ~ 3.99-50 ~ 499.5--70 ~ 500-0.2 ~ 1.5-

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)4 ~ 4.49ENo processing4.51.5 ~ 4.49-50 ~ 499.5--70 ~ 500-0.2 ~ 1.5-

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)4.5 ~ 4.99ENo processing51.5 ~ 4.99-50 ~ 499.5--70 ~ 500-0.2 ~ 1.7-

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)5 ~ 5.49ENo processing5.52 ~ 5.49-50 ~ 499.5--70 ~ 500-0.2 ~ 2-

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)5.5 ~ 5.99ENo processing62 ~ 5.99-50 ~ 599.5--70 ~ 600-0.2 ~ 2-

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)6 ~ 6.49ENo processing6.52 ~ 6.49-50 ~ 599.5--70 ~ 600-0.2 ~ 2.2-

-

1 Piece(s) 8 Day(s) or more 106mm(JIS)-0.01/-0.02 (Reference tolerance)6.5 ~ 6.99ENo processing72 ~ 6.99-50 ~ 599.5--70 ~ 600-0.2 ~ 2.5-

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)7 ~ 7.99ENo processing82 ~ 7.99-50 ~ 599.5--70 ~ 600-0.2 ~ 3-

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)8 ~ 9.99ENo processing102 ~ 9.99-50 ~ 599.5--70 ~ 600-0.2 ~ 4-

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 11.99ENo processing122 ~ 11.99-50 ~ 699.5--70 ~ 700-0.3 ~ 5-

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 14.99ENo processing152 ~ 14.99-50 ~ 699.5--70 ~ 700-0.3 ~ 5-

-

1 Piece(s) 8 Day(s) or more 108mm(JIS)-0.01/-0.02 (Reference tolerance)10 ~ 15.99ENo processing162.5 ~ 15.99-50 ~ 699.5--70 ~ 700-0.3 ~ 5-

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)1.5 ~ 1.9BNo processing20.7 ~ 1.99-50 ~ 299.5--70 ~ 300---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)2 ~ 2.49BNo processing2.50.7 ~ 2.49-50 ~ 299.5--70 ~ 300---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)2.5 ~ 2.99BNo processing31 ~ 2.99-50 ~ 399.5--70 ~ 400---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)3 ~ 3.49BNo processing3.51 ~ 3.49-50 ~ 399.5--70 ~ 400---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)3.5 ~ 3.99BNo processing41 ~ 3.99-50 ~ 399.5--70 ~ 400---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)4 ~ 4.49BNo processing4.51.5 ~ 4.49-50 ~ 399.5--70 ~ 400---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)4.5 ~ 4.99BNo processing51.5 ~ 4.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)5 ~ 5.49BNo processing5.51.5 ~ 5.49-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)5.5 ~ 5.99BNo processing62 ~ 5.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)6 ~ 6.49BNo processing6.52 ~ 6.49-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)6.5 ~ 6.99BNo processing72 ~ 6.99-50 ~ 499.5--70 ~ 500---

-

1 Piece(s) 8 Day(s) or more 104mm(T4)-0.01/-0.02 (Reference tolerance)7 ~ 7.99BNo processing82 ~ 7.99-50 ~ 499.5--70 ~ 500---
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
Step (Step shape) Shape (Tip shape) No. (Nominal diameter)
(mm)
A (Tip part)
(mm)
C (Tip part)
(mm)
F (Shaft diameter length)
(mm)
G (Tip C chamfering width on the tip part)
(mm)
K (Tip part angle)
(°)
L (L dimension)
(mm)
Q (Tip R chamfering on the tip part)
(mm)
R (Tip part)
(mm)
S (Tip tapered width on the tip part)
(mm)

Loading...

Basic Information

Material SKD61 Surface treatment Nitrided Applicable sleeve hole diameter tolerance +0.01/0 or H7
With/without cooling hole No

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time