(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Core Pins For Shaft Holes -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-

Core Pins For Shaft Holes -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-

Click this image to zoom it.

A core pin for shaft holes with a fixed shaft diameter (D) and a specified shaft diameter (P) of 0.01mm.

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPSBEF2.5-[22-100/0.01]-P[2-2.49/0.01]-F[20-96/0.01]-A[1.5-2.49/0.01]-W[0.75-2.48/0.01]-S[0.5-35/0.01]-R[0.3-0.9/0.1]
CPSBEF3-[22-100/0.01]-P[2.5-2.99/0.01]-F[20-96/0.01]-A[1.5-2.99/0.01]-W[0.75-2.98/0.01]-S[0.5-35/0.01]-R[0.3-1/0.1]
CPSBEF3.5-[22-100/0.01]-P[3-3.49/0.01]-F[20-96/0.01]-A[1.5-3.49/0.01]-W[0.75-3.48/0.01]-S[0.5-35/0.01]-R[0.3-1.2/0.1]
CPSBEF4-[22-100/0.01]-P[3.5-3.99/0.01]-F[20-96/0.01]-A[1.5-3.99/0.01]-W[0.75-3.98/0.01]-S[0.5-35/0.01]-R[0.3-1.5/0.1]
CPSBEF4.5-[22-100/0.01]-P[4-4.49/0.01]-F[20-96/0.01]-A[1.5-4.49/0.01]-W[0.75-4.48/0.01]-S[0.5-35/0.01]-R[0.3-1.5/0.1]
CPSBEF5-[22-150/0.01]-P[4.5-4.99/0.01]-F[20-146/0.01]-A[1.5-4.99/0.01]-W[0.75-4.98/0.01]-S[0.5-35/0.01]-R[0.3-1.7/0.1]
CPSBEF5.5-[22-150/0.01]-P[5-5.49/0.01]-F[20-146/0.01]-A[1.5-5.49/0.01]-W[0.75-5.48/0.01]-S[0.5-35/0.01]-R[0.3-2/0.1]
CPSBEF6-[22-150/0.01]-P[5.5-5.99/0.01]-F[20-146/0.01]-A[2-5.99/0.01]-W[1-5.98/0.01]-S[0.5-35/0.01]-R[0.3-2.2/0.1]
CPSBEF6.5-[22-150/0.01]-P[6-6.49/0.01]-F[20-146/0.01]-A[2-6.49/0.01]-W[1-6.48/0.01]-S[0.5-35/0.01]-R[0.3-2.5/0.1]
CPSBEF7-[22-150/0.01]-P[6.5-6.99/0.01]-F[20-146/0.01]-A[2-6.99/0.01]-W[1-6.98/0.01]-S[0.5-35/0.01]
CPSBEF8-[22-150/0.01]-P[7-7.99/0.01]-F[20-146/0.01]-A[2-7.99/0.01]-W[1-7.98/0.01]-S[0.5-35/0.01]-R[0.3-4/0.1]
CPSBEF10-[22-150/0.01]-P[8-9.99/0.01]-F[20-146/0.01]-A[2-9.99/0.01]-W[1-9.98/0.01]-S[0.5-35/0.01]-R[0.3-5/0.1]
CPSBEG2.5-[22-100/0.01]-P[2-2.49/0.01]-F[20-96/0.01]-A[1.5-2.49/0.01]-W[0.75-2.48/0.01]-S[0.5-35/0.01]-R[0.3-0.9/0.1]
CPSBEG3-[22-100/0.01]-P[2.5-2.99/0.01]-F[20-96/0.01]-A[1.5-2.99/0.01]-W[0.75-2.98/0.01]-S[0.5-35/0.01]-R[0.3-1/0.1]
CPSBEG3.5-[22-100/0.01]-P[3-3.49/0.01]-F[20-96/0.01]-A[1.5-3.49/0.01]-W[0.75-3.48/0.01]-S[0.5-35/0.01]-R[0.3-1.2/0.1]
CPSBEG4-[22-100/0.01]-P[3.5-3.99/0.01]-F[20-96/0.01]-A[1.5-3.99/0.01]-W[0.75-3.98/0.01]-S[0.5-35/0.01]-R[0.3-1.5/0.1]
CPSBEG4.5-[22-100/0.01]-P[4-4.49/0.01]-F[20-96/0.01]-A[1.5-4.49/0.01]-W[0.75-4.48/0.01]-S[0.5-35/0.01]-R[0.3-1.5/0.1]
CPSBEG5-[22-150/0.01]-P[4.5-4.99/0.01]-F[20-146/0.01]-A[1.5-4.99/0.01]-W[0.75-4.98/0.01]-S[0.5-35/0.01]-R[0.3-1.7/0.1]
CPSBEG5.5-[22-150/0.01]-P[5-5.49/0.01]-F[20-146/0.01]-A[1.5-5.49/0.01]-W[0.75-5.48/0.01]-S[0.5-35/0.01]-R[0.3-2/0.1]
CPSBEG6-[22-150/0.01]-P[5.5-5.99/0.01]-F[20-146/0.01]-A[2-5.99/0.01]-W[1-5.98/0.01]-S[0.5-35/0.01]-R[0.3-2/0.1]
CPSBEG6.5-[22-150/0.01]-P[6-6.49/0.01]-F[20-146/0.01]-A[2-6.49/0.01]-W[1-6.48/0.01]-S[0.5-35/0.01]-R[0.3-2.2/0.1]
CPSBEG7-[22-150/0.01]-P[6.5-6.99/0.01]-F[20-146/0.01]-A[2-6.99/0.01]-W[1-6.98/0.01]-S[0.5-35/0.01]-R[0.3-2.5/0.1]
CPSBEG8-[22-150/0.01]-P[7-7.99/0.01]-F[20-146/0.01]-A[2-7.99/0.01]-W[1-7.98/0.01]-S[0.5-35/0.01]-R[0.3-3/0.1]
CPSBEG10-[22-150/0.01]-P[8-9.99/0.01]-F[20-146/0.01]-A[2-9.99/0.01]-W[1-9.98/0.01]-S[0.5-35/0.01]-R[0.3-0.9/0.1]
CPSEF2.5-[22-100/0.01]-F[20-96/0.01]-A[1.5-2.5/0.01]-W[0.75-2.48/0.01]-S[0.5-30/0.01]-R[0.3-0.9/0.1]
CPSEF3-[22-100/0.01]-F[20-96/0.01]-A[1.5-3/0.01]-W[0.75-2.98/0.01]-S[0.5-30/0.01]-R[0.3-1/0.1]
CPSEF3.5-[22-100/0.01]-F[20-96/0.01]-A[1.5-3.5/0.01]-W[0.75-3.48/0.01]-S[0.5-30/0.01]-R[0.3-1.2/0.1]
CPSEF4-[22-100/0.01]-F[20-96/0.01]-A[1.5-4/0.01]-W[0.75-3.98/0.01]-S[0.5-30/0.01]-R[0.3-1.5/0.1]
CPSEF4.5-[22-100/0.01]-F[20-96/0.01]-A[1.5-4.5/0.01]-W[0.75-4.48/0.01]-S[0.5-30/0.01]-R[0.3-1.5/0.1]
CPSEF5-[22-150/0.01]-F[20-146/0.01]-A[1.5-5/0.01]-W[0.75-4.98/0.01]-S[0.5-30/0.01]-R[0.3-2/0.1]
CPSEF5.5-[22-150/0.01]-F[20-146/0.01]-A[1.5-6.5/0.01]-W[0.75-5.48/0.01]-S[0.5-30/0.01]-R[0.3-2/0.1]
CPSEF6-[22-150/0.01]-F[20-146/0.01]-A[2-6/0.01]-W[1-5.98/0.01]-S[0.5-30/0.01]-R[0.3-2/0.1]
CPSEF6.5-[22-150/0.01]-F[20-146/0.01]-A[2-6.5/0.01]-W[1-6.48/0.01]-S[0.5-35/0.01]-R[0.3-2.2/0.1]
CPSEF7-[22-150/0.01]-F[20-146/0.01]-A[2-7/0.01]-W[1-6.98/0.01]-S[0.5-35/0.01]-R[0.3-2.5/0.1]
CPSEF8-[22-150/0.01]-F[20-146/0.01]-A[2-8/0.01]-W[1-7.98/0.01]-S[0.5-35/0.01]-R[0.3-3/0.1]
CPSEF10-[22-150/0.01]-F[20-146/0.01]-A[2-10/0.01]-W[1-9.98/0.01]-S[0.5-35/0.01]-R[0.3-4/0.1]
CPSEG2.5-[22-100/0.01]-F[20-96/0.01]-A[1.5-2.5/0.01]-W[0.75-2.48/0.01]-S[0.5-35/0.01]-R[0.3-0.9/0.1]
CPSEG3-[22-100/0.01]-F[20-96/0.01]-A[1.5-3/0.01]-W[0.75-2.98/0.01]-S[0.5-35/0.01]-R[0.3-1/0.1]
CPSEG3.5-[22-100/0.01]-F[20-96/0.01]-A[1.5-3.5/0.01]-W[0.75-3.48/0.01]-S[0.5-35/0.01]-R[0.3-1.2/0.1]
CPSEG4-[22-100/0.01]-F[20-96/0.01]-A[1.5-4/0.01]-W[0.75-3.98/0.01]-S[0.5-35/0.01]-R[0.3-1.5/0.1]
CPSEG4.5-[22-100/0.01]-F[20-96/0.01]-A[1.5-4.5/0.01]-W[0.75-4.48/0.01]-S[0.5-35/0.01]-R[0.3-1.5/0.1]
CPSEG5-[22-100/0.01]-F[20-96/0.01]-A[1.5-5/0.01]-W[0.75-4.98/0.01]-S[0.5-35/0.01]-R[0.3-2/0.1]
CPSEG5.5-[22-150/0.01]-F[20-146/0.01]-A[1.5-5.5/0.01]-W[0.75-5.48/0.01]-S[0.5-35/0.01]-R[0.3-2/0.1]
CPSEG6-[22-150/0.01]-F[20-146/0.01]-A[2-6/0.01]-W[1-5.98/0.01]-S[0.5-35/0.01]-R[0.3-2/0.1]
CPSEG6.5-[22-150/0.01]-F[20-146/0.01]-A[2-6.5/0.01]-W[1-6.48/0.01]-S[0.5-35/0.01]-R[0.3-2.2/0.1]
CPSEG7-[22-150/0.01]-F[20-146/0.01]-A[2-7/0.01]-W[1-6.98/0.01]-S[0.5-35/0.01]-R[0.3-2.5/0.1]
CPSEG8-[22-150/0.01]-F[20-146/0.01]-A[2-8/0.01]-W[1-7.98/0.01]-S[0.5-35/0.01]-R[0.3-3/0.1]
CPSEG10-[22-150/0.01]-F[20-146/0.01]-A[2-10/0.01]-W[1-9.98/0.01]-S[0.5-35/0.01]-R[0.3-4/0.1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSStep (Step shape) Shape (Tip shape) D/P (Shaft diameter)
(mm)
No. (Nominal diameter)
(mm)
A (Tip diameter)
(mm)
C (Tip part)
(mm)
CC F (Bearing bore length)
(mm)
L (L dimension)
(mm)
R (Tip part)
(mm)
S (Tip part)
(mm)
W (Tip part)
(mm)

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F2 ~ 2.492.51.5 ~ 2.49--20 ~ 9622 ~ 1000.3 ~ 0.90.5 ~ 350.75 ~ 2.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F2.5 ~ 2.9931.5 ~ 2.99--20 ~ 9622 ~ 1000.3 ~ 10.5 ~ 350.75 ~ 2.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F3 ~ 3.493.51.5 ~ 3.49--20 ~ 9622 ~ 1000.3 ~ 1.20.5 ~ 350.75 ~ 3.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F3.5 ~ 3.9941.5 ~ 3.99--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 350.75 ~ 3.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F4 ~ 4.494.51.5 ~ 4.49--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 350.75 ~ 4.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F4.5 ~ 4.9951.5 ~ 4.99--20 ~ 14622 ~ 1500.3 ~ 1.70.5 ~ 350.75 ~ 4.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F5 ~ 5.495.51.5 ~ 5.49--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 350.75 ~ 5.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F5.5 ~ 5.9962 ~ 5.99--20 ~ 14622 ~ 1500.3 ~ 2.20.5 ~ 351 ~ 5.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F6 ~ 6.496.52 ~ 6.49--20 ~ 14622 ~ 1500.3 ~ 2.50.5 ~ 351 ~ 6.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F6.5 ~ 6.9972 ~ 6.99--20 ~ 14622 ~ 150-0.5 ~ 351 ~ 6.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F7 ~ 7.9982 ~ 7.99--20 ~ 14622 ~ 1500.3 ~ 40.5 ~ 351 ~ 7.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F8 ~ 9.99102 ~ 9.99--20 ~ 14622 ~ 1500.3 ~ 50.5 ~ 351 ~ 9.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G2 ~ 2.492.51.5 ~ 2.49--20 ~ 9622 ~ 1000.3 ~ 0.90.5 ~ 350.75 ~ 2.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G2.5 ~ 2.9931.5 ~ 2.99--20 ~ 9622 ~ 1000.3 ~ 10.5 ~ 350.75 ~ 2.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G3 ~ 3.493.51.5 ~ 3.49--20 ~ 9622 ~ 1000.3 ~ 1.20.5 ~ 350.75 ~ 3.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G3.5 ~ 3.9941.5 ~ 3.99--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 350.75 ~ 3.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G4 ~ 4.494.51.5 ~ 4.49--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 350.75 ~ 4.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G4.5 ~ 4.9951.5 ~ 4.99--20 ~ 14622 ~ 1500.3 ~ 1.70.5 ~ 350.75 ~ 4.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G5 ~ 5.495.51.5 ~ 5.49--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 350.75 ~ 5.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G5.5 ~ 5.9962 ~ 5.99--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 351 ~ 5.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G6 ~ 6.496.52 ~ 6.49--20 ~ 14622 ~ 1500.3 ~ 2.20.5 ~ 351 ~ 6.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G6.5 ~ 6.9972 ~ 6.99--20 ~ 14622 ~ 1500.3 ~ 2.50.5 ~ 351 ~ 6.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G7 ~ 7.9982 ~ 7.99--20 ~ 14622 ~ 1500.3 ~ 30.5 ~ 351 ~ 7.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G8 ~ 9.99102 ~ 9.99--20 ~ 14622 ~ 1500.3 ~ 0.90.5 ~ 351 ~ 9.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F2.5-1.5 ~ 2.5--20 ~ 9622 ~ 1000.3 ~ 0.90.5 ~ 300.75 ~ 2.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F3-1.5 ~ 3--20 ~ 9622 ~ 1000.3 ~ 10.5 ~ 300.75 ~ 2.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F3.5-1.5 ~ 3.5--20 ~ 9622 ~ 1000.3 ~ 1.20.5 ~ 300.75 ~ 3.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F4-1.5 ~ 4--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 300.75 ~ 3.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F4.5-1.5 ~ 4.5--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 300.75 ~ 4.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F5-1.5 ~ 5--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 300.75 ~ 4.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F5.5-1.5 ~ 6.5--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 300.75 ~ 5.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F6-2 ~ 6--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 301 ~ 5.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F6.5-2 ~ 6.5--20 ~ 14622 ~ 1500.3 ~ 2.20.5 ~ 351 ~ 6.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F7-2 ~ 7--20 ~ 14622 ~ 1500.3 ~ 2.50.5 ~ 351 ~ 6.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F8-2 ~ 8--20 ~ 14622 ~ 1500.3 ~ 30.5 ~ 351 ~ 7.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)F10-2 ~ 10--20 ~ 14622 ~ 1500.3 ~ 40.5 ~ 351 ~ 9.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G2.5-1.5 ~ 2.5--20 ~ 9622 ~ 1000.3 ~ 0.90.5 ~ 350.75 ~ 2.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G3-1.5 ~ 3--20 ~ 9622 ~ 1000.3 ~ 10.5 ~ 350.75 ~ 2.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G3.5-1.5 ~ 3.5--20 ~ 9622 ~ 1000.3 ~ 1.20.5 ~ 350.75 ~ 3.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G4-1.5 ~ 4--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 350.75 ~ 3.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G4.5-1.5 ~ 4.5--20 ~ 9622 ~ 1000.3 ~ 1.50.5 ~ 350.75 ~ 4.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G5-1.5 ~ 5--20 ~ 9622 ~ 1000.3 ~ 20.5 ~ 350.75 ~ 4.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G5.5-1.5 ~ 5.5--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 350.75 ~ 5.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G6-2 ~ 6--20 ~ 14622 ~ 1500.3 ~ 20.5 ~ 351 ~ 5.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G6.5-2 ~ 6.5--20 ~ 14622 ~ 1500.3 ~ 2.20.5 ~ 351 ~ 6.48

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G7-2 ~ 7--20 ~ 14622 ~ 1500.3 ~ 2.50.5 ~ 351 ~ 6.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G8-2 ~ 8--20 ~ 14622 ~ 1500.3 ~ 30.5 ~ 351 ~ 7.98

-

1 Piece(s) 6 Day(s) or more 10E (for shaft holes)G10-2 ~ 10--20 ~ 14622 ~ 1500.3 ~ 40.5 ~ 351 ~ 9.98
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSStep (Step shape) Shape (Tip shape) D/P (Shaft diameter)
(mm)
No. (Nominal diameter)
(mm)
A (Tip diameter)
(mm)
C (Tip part)
(mm)
CC F (Bearing bore length)
(mm)
L (L dimension)
(mm)
R (Tip part)
(mm)
S (Tip part)
(mm)
W (Tip part)
(mm)

Loading...

  1. 1

Basic Information

Material SKH51 Shaft diameter tolerance 0/-0.005 L/F dimension tolerance +0.01/0

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)