(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 2/3 to 6:00 (MYT) 3/3/2025. We apologize for the inconvenience.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Linear Shafts - Shaft Ends Configurable
Click this image to zoom it.
Move the mouse over the image to zoom
Combination of both ends' shapes unavailable for standard products becomes available.
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| FPSFJAB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSFJDE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FPSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSFJEE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FPSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[2-750/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
| FPSFJGB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJGE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJHB-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-N[3,4,5,6,8,10,12,16,20,24,30]-R[1-50/1] |
| FPSFJHE-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]-R[5-40/1] |
| FPSFJTB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-N[3,4,5,6,8,10,12]-J[5-32/1] |
| FPSFJTE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-N[3,4,5,6,8,10,12]-Q[2-19/1]-J[5-32/1] |
| FPSSFJAB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSSFJDE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FPSSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSSFJEE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FPSSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
| FPSSFJGB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJGE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJHB-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-N[3,4,5,6,8,10,12,16,20,24,30]-R[1-50/1] |
| FPSSFJHE-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]-R[5-40/1] |
| FPSSFJTB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-N[3,4,5,6,8,10,12]-J[5-32/1] |
| FPSSFJTE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-N[3,4,5,6,8,10,12]-Q[2-19/1]-J[5-32/1] |
| FSFJAB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FSFJDE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FSFJEE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1] |
| FSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Basic Shape | End Shape (Left) | End Shape (Right) | Material | Surface Treatment | Shaft Dia. D (Ø) | Length L (mm) | Shaft Fit Tolerance | Hardness | B (mm) | Change Thread M to Fine One [MMC] (mm) | Change Thread M to Fine One [MMS] (mm) | Coarse [M] (mm) | Coarse [N] (mm) | F (mm) | Fine Thread [PMC] (mm) | Fine Thread [PMS] (mm) | Fine Thread [QMC] (mm) | Fine Thread [QMS] (mm) | H (mm) | J (mm) | P (mm) | Q (mm) | QC | R (mm) | S (mm) | T (mm) | U (mm) | W (mm) | Z (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | No Machining | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | No Machining | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | - | 10 ～ 18 | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | - | 10 ～ 18 | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | No Machining | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Both Ends Stepped | No Machining | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Both Ends Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | 2 ～ 750 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | 1 ～ 1500 | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Hex Socket | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Hex Socket | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapped Hole | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 4 ～ 12 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | 1 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped Hole | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 4 ～ 12 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | 5 ～ 40 | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapered | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 12 | - | - | - | - | - | - | 5 ～ 32 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapered | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 12 | - | - | - | - | - | - | 5 ～ 32 | - | 2 ～ 19 | - | - | - | 2 ～ 95 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | No Machining | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | No Machining | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | 0 ～ 90 | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | - | 10 ～ 18 | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | 0 ～ 90 | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | - | 10 ～ 18 | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | No Machining | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Both Ends Stepped | No Machining | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Both Ends Stepped | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | 1 ～ 1500 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | 1 ～ 1500 | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Hex Socket | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Hex Socket | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapped Hole | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | 4 ～ 12 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | 1 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped Hole | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | 4 ～ 12 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | 5 ～ 40 | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapered | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 12 | - | - | - | - | - | - | 5 ～ 32 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapered | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (56HRC~) | - | - | - | - | 3 ～ 12 | - | - | - | - | - | - | 5 ～ 32 | - | 2 ～ 19 | - | - | - | 2 ～ 95 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | No Machining | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | No Machining | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | Threaded | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | - | 10 ～ 18 | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Threaded | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | 0 ～ 90 | - | - | - | 3 ～ 30 | 0 ～ 250 | - | 10 ～ 18 | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | No Machining | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Both Ends Stepped | No Machining | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Both Ends Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Solid | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | 1 ～ 1500 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | 3 ～ 30 | - | - | - | - | - | 1 ～ 1500 | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - |
Loading...
Basic Information
| Shaft End Perpendicularity | Perpendicularity (0.2) | Heat Treatment | Induction Hardened |
|---|
Specification/Dimensions
-
Basic Shape
-
Solid -
One End Stepped -
Both Ends Stepped
-
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded -
With Retaining Ring Grooves -
Tapped Hole -
Hex Socket -
Tapered
-
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Shaft Dia. D(Ø)
-
Length L(mm)
-
Shaft Fit Tolerance
-
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
-
B(mm)
-
Change Thread M to Fine One [MMC](mm)
-
Change Thread M to Fine One [MMS](mm)
-
Coarse [M](mm)
-
Coarse [N](mm)
-
F(mm)
-
Fine Thread [PMC](mm)
-
Fine Thread [PMS](mm)
-
Fine Thread [QMC](mm)
-
Fine Thread [QMS](mm)
-
H(mm)
-
J(mm)
-
P(mm)
-
Q(mm)
-
QC
- QC
-
R(mm)
-
S(mm)
-
T(mm)
-
U(mm)
-
W(mm)
-
Z(mm)
-
type
- FPSFJAA
- FPSFJAB
- FPSFJAC
- FPSFJAD
- FPSFJAE
- FPSFJAF
- FPSFJAG
- FPSFJAH
- FPSFJAT
- FPSFJBA
- FPSFJBB
- FPSFJBC
- FPSFJBD
- FPSFJBE
- FPSFJBF
- FPSFJBG
- FPSFJBH
- FPSFJBT
- FPSFJCA
- FPSFJCB
- FPSFJCC
- FPSFJCD
- FPSFJCE
- FPSFJCF
- FPSFJCG
- FPSFJCH
- FPSFJCT
- FPSFJDA
- FPSFJDB
- FPSFJDC
- FPSFJDD
- FPSFJDE
- FPSFJDF
- FPSFJDG
- FPSFJDH
- FPSFJDT
- FPSFJEA
- FPSFJEB
- FPSFJEC
- FPSFJED
- FPSFJEE
- FPSFJEF
- FPSFJEG
- FPSFJEH
- FPSFJET
- FPSFJFA
- FPSFJFB
- FPSFJFC
- FPSFJFD
- FPSFJFE
- FPSFJFF
- FPSFJFG
- FPSFJFH
- FPSFJFT
- FPSFJGA
- FPSFJGB
- FPSFJGC
- FPSFJGD
- FPSFJGE
- FPSFJGF
- FPSFJGG
- FPSFJGH
- FPSFJGT
- FPSFJHA
- FPSFJHB
- FPSFJHC
- FPSFJHD
- FPSFJHE
- FPSFJHF
- FPSFJHG
- FPSFJHH
- FPSFJHT
- FPSFJTA
- FPSFJTB
- FPSFJTC
- FPSFJTD
- FPSFJTE
- FPSFJTF
- FPSFJTG
- FPSFJTH
- FPSFJTT
- FPSSFJAA
- FPSSFJAB
- FPSSFJAC
- FPSSFJAD
- FPSSFJAE
- FPSSFJAF
- FPSSFJAG
- FPSSFJAH
- FPSSFJAT
- FPSSFJBA
- FPSSFJBB
- FPSSFJBC
- FPSSFJBD
- FPSSFJBE
- FPSSFJBF
- FPSSFJBG
- FPSSFJBH
- FPSSFJBT
- FPSSFJCA
- FPSSFJCB
- FPSSFJCC
- FPSSFJCD
- FPSSFJCE
- FPSSFJCF
- FPSSFJCG
- FPSSFJCH
- FPSSFJCT
- FPSSFJDA
- FPSSFJDB
- FPSSFJDC
- FPSSFJDD
- FPSSFJDE
- FPSSFJDF
- FPSSFJDG
- FPSSFJDH
- FPSSFJDT
- FPSSFJEA
- FPSSFJEB
- FPSSFJEC
- FPSSFJED
- FPSSFJEE
- FPSSFJEF
- FPSSFJEG
- FPSSFJEH
- FPSSFJET
- FPSSFJFA
- FPSSFJFB
- FPSSFJFC
- FPSSFJFD
- FPSSFJFE
- FPSSFJFF
- FPSSFJFG
- FPSSFJFH
- FPSSFJFT
- FPSSFJGA
- FPSSFJGB
- FPSSFJGC
- FPSSFJGD
- FPSSFJGE
- FPSSFJGF
- FPSSFJGG
- FPSSFJGH
- FPSSFJGT
- FPSSFJHA
- FPSSFJHB
- FPSSFJHC
- FPSSFJHD
- FPSSFJHE
- FPSSFJHF
- FPSSFJHG
- FPSSFJHH
- FPSSFJHT
- FPSSFJTA
- FPSSFJTB
- FPSSFJTC
- FPSSFJTD
- FPSSFJTE
- FPSSFJTF
- FPSSFJTG
- FPSSFJTH
- FPSSFJTT
- FSFJAA
- FSFJAB
- FSFJAC
- FSFJAD
- FSFJAE
- FSFJAF
- FSFJAG
- FSFJAH
- FSFJAT
- FSFJBA
- FSFJBB
- FSFJBC
- FSFJBD
- FSFJBE
- FSFJBF
- FSFJBG
- FSFJBH
- FSFJBT
- FSFJCA
- FSFJCB
- FSFJCC
- FSFJCD
- FSFJCE
- FSFJCF
- FSFJCG
- FSFJCH
- FSFJCT
- FSFJDA
- FSFJDB
- FSFJDC
- FSFJDD
- FSFJDE
- FSFJDF
- FSFJDG
- FSFJDH
- FSFJDT
- FSFJEA
- FSFJEB
- FSFJEC
- FSFJED
- FSFJEE
- FSFJEF
- FSFJEG
- FSFJEH
- FSFJET
- FSFJFA
- FSFJFB
- FSFJFC
- FSFJFD
- FSFJFE
- FSFJFF
- FSFJFG
- FSFJFH
- FSFJFT
- FSFJGA
- FSFJGB
- FSFJGC
- FSFJGD
- FSFJGE
- FSFJGF
- FSFJGG
- FSFJGH
- FSFJGT
- FSFJHA
- FSFJHB
- FSFJHC
- FSFJHD
- FSFJHE
- FSFJHF
- FSFJHG
- FSFJHH
- FSFJHT
- FSFJTA
- FSFJTB
- FSFJTC
- FSFJTD
- FSFJTE
- FSFJTF
- FSFJTG
- FSFJTH
- FSFJTT
- FSFUAA
- FSFUAB
- FSFUAC
- FSFUAD
- FSFUAE
- FSFUAF
- FSFUAG
- FSFUAH
- FSFUAT
- FSFUBA
- FSFUBB
- FSFUBC
- FSFUBD
- FSFUBE
- FSFUBF
- FSFUBG
- FSFUBH
- FSFUBT
- FSFUCA
- FSFUCB
- FSFUCC
- FSFUCD
- FSFUCE
- FSFUCF
- FSFUCG
- FSFUCH
- FSFUCT
- FSFUDA
- FSFUDB
- FSFUDC
- FSFUDD
- FSFUDE
- FSFUDF
- FSFUDG
- FSFUDH
- FSFUDT
- FSFUEA
- FSFUEB
- FSFUEC
- FSFUED
- FSFUEE
- FSFUEF
- FSFUEG
- FSFUEH
- FSFUET
- FSFUFA
- FSFUFB
- FSFUFC
- FSFUFD
- FSFUFE
- FSFUFF
- FSFUFG
- FSFUFH
- FSFUFT
- FSFUGA
- FSFUGB
- FSFUGC
- FSFUGD
- FSFUGE
- FSFUGF
- FSFUGG
- FSFUGH
- FSFUGT
- FSFUHA
- FSFUHB
- FSFUHC
- FSFUHD
- FSFUHE
- FSFUHF
- FSFUHG
- FSFUHH
- FSFUHT
- FSFUTA
- FSFUTB
- FSFUTC
- FSFUTD
- FSFUTE
- FSFUTF
- FSFUTG
- FSFUTH
- FSFUTT
- FSSFJAA
- FSSFJAB
- FSSFJAC
- FSSFJAD
- FSSFJAE
- FSSFJAF
- FSSFJAG
- FSSFJAH
- FSSFJAT
- FSSFJBA
- FSSFJBB
- FSSFJBC
- FSSFJBD
- FSSFJBE
- FSSFJBF
- FSSFJBG
- FSSFJBH
- FSSFJBT
- FSSFJCA
- FSSFJCB
- FSSFJCC
- FSSFJCD
- FSSFJCE
- FSSFJCF
- FSSFJCG
- FSSFJCH
- FSSFJCT
- FSSFJDA
- FSSFJDB
- FSSFJDC
- FSSFJDD
- FSSFJDE
- FSSFJDF
- FSSFJDG
- FSSFJDH
- FSSFJDT
- FSSFJEA
- FSSFJEB
- FSSFJEC
- FSSFJED
- FSSFJEE
- FSSFJEF
- FSSFJEG
- FSSFJEH
- FSSFJET
- FSSFJFA
- FSSFJFB
- FSSFJFC
- FSSFJFD
- FSSFJFE
- FSSFJFF
- FSSFJFG
- FSSFJFH
- FSSFJFT
- FSSFJGA
- FSSFJGB
- FSSFJGC
- FSSFJGD
- FSSFJGE
- FSSFJGF
- FSSFJGG
- FSSFJGH
- FSSFJGT
- FSSFJHA
- FSSFJHB
- FSSFJHC
- FSSFJHD
- FSSFJHE
- FSSFJHF
- FSSFJHG
- FSSFJHH
- FSSFJHT
- FSSFJTA
- FSSFJTB
- FSSFJTC
- FSSFJTD
- FSSFJTE
- FSSFJTF
- FSSFJTG
- FSSFJTH
- FSSFJTT
- FSSFUAA
- FSSFUAB
- FSSFUAC
- FSSFUAD
- FSSFUAE
- FSSFUAF
- FSSFUAG
- FSSFUAH
- FSSFUAT
- FSSFUBA
- FSSFUBB
- FSSFUBC
- FSSFUBD
- FSSFUBE
- FSSFUBF
- FSSFUBG
- FSSFUBH
- FSSFUBT
- FSSFUCA
- FSSFUCB
- FSSFUCC
- FSSFUCD
- FSSFUCE
- FSSFUCF
- FSSFUCG
- FSSFUCH
- FSSFUCT
- FSSFUDA
- FSSFUDB
- FSSFUDC
- FSSFUDD
- FSSFUDE
- FSSFUDF
- FSSFUDG
- FSSFUDH
- FSSFUDT
- FSSFUEA
- FSSFUEB
- FSSFUEC
- FSSFUED
- FSSFUEE
- FSSFUEF
- FSSFUEG
- FSSFUEH
- FSSFUET
- FSSFUFA
- FSSFUFB
- FSSFUFC
- FSSFUFD
- FSSFUFE
- FSSFUFF
- FSSFUFG
- FSSFUFH
- FSSFUFT
- FSSFUGA
- FSSFUGB
- FSSFUGC
- FSSFUGD
- FSSFUGE
- FSSFUGF
- FSSFUGG
- FSSFUGH
- FSSFUGT
- FSSFUHA
- FSSFUHB
- FSSFUHC
- FSSFUHD
- FSSFUHE
- FSSFUHF
- FSSFUHG
- FSSFUHH
- FSSFUHT
- FSSFUTA
- FSSFUTB
- FSSFUTC
- FSSFUTD
- FSSFUTE
- FSSFUTF
- FSSFUTG
- FSSFUTH
- FSSFUTT
-
End Shape (Right)
-
No Machining -
Tapped -
Threaded -
With Retaining Ring Grooves -
Tapped Hole -
Hex Socket Hole -
Tapered
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short
- Linear Shafts - Both Ends Threaded Hollow
- Shafts -One End Two Female Thread Holes Type-
- Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type
- High Precision Linear Shafts - Both Ends Stepped and Tapped / Both Ends Stepped and Tapped with Wrench Flats
- Linear Shafts-One End Threaded One End Tapped
- Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole
- Linear Shafts Both Ends Tapped
Complementary Products
-
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI Standard Price : MYR 35.15- Days to Ship : 2 Day(s) or more
-
Shaft Collar (Wedge) - 2-Hole / 2-Tapped (Coarse)
MISUMI Standard Price : MYR 32.46- Days to Ship : 2 Day(s) or more
-
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI Standard Price : MYR 65.47- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
Flanged Linear Bushings - Single, Opposite Counterbored HoleMISUMI
Standard Price : MYR 21.83-
Days to Ship : 1 Day(s) or more
-
-
Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends ConfigurableMISUMI
Days to Ship : 6 Day(s) or more
-
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End TappedMISUMI
Days to Ship : 3 Day(s) or more
-
-
-
-
-
Metal Washers - Thickness +-0.10 & +-0.01 mm/Dimensions ConfigurableMISUMI
Days to Ship : 3 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy