(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Pivot Pins - End Shape Combination Selectable

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
FCLAF-D[6-20/1]-L[5-200/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,​4,​5,​6,​8,​10]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLEF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLFA-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]
FCLFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-MC[3,​4,​5,​6,​8,​10]
FCLFC-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[2-50/0.1]
FCLFD-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-TC[0.5-125/0.1]-HC[7-30/0.5]
FCLFE-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLFF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLFG-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLFH-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[2-125/0.1]
FCLGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHAF-D[6-20/1]-L[5-200/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,​4,​5,​6,​8,​10]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHEF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHFA-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]
FCLHFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLHFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-MC[3,​4,​5,​6,​8,​10]
FCLHFC-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[2-50/0.1]
FCLHFD-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-TC[0.5-125/0.1]-HC[7-30/0.5]
FCLHFE-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHFF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHFG-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLHFH-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[2-125/0.1]
FCLHGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLHHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSAF-D[6-20/1]-L[5-200/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,​4,​5,​6,​8,​10]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSEF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSFA-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]
FCLSFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-MC[3,​4,​5,​6,​8,​10]
FCLSFC-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[2-50/0.1]
FCLSFD-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-TC[0.5-125/0.1]-HC[7-30/0.5]
FCLSFE-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSFF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSFG-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSFH-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[2-125/0.1]
FCLSGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHAF-D[6-20/1]-L[5-200/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,​4,​5,​6,​8,​10]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHEF-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHFA-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]
FCLSHFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-GC[0-10/0.1]
FCLSHFB-D[6-20/1]-L[5-200/0.1]-M[3,​4,​5,​6,​8,​10,​12,​16]-NC[0-125/0.1]-MC[3,​4,​5,​6,​8,​10]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSShaft Dia. D
(mm)
Mounting Method Basic Shape Material Hardness Surface Treatment Material Detail Left End Shape Right End Shape G
(mm)
GC
(mm)
H
(mm)
HC
(mm)
K
(mm)
KC
(mm)
L
(mm)
M
(mm)
MC
(mm)
N
(mm)
NC
(mm)
T
(mm)
TC
(mm)
Y
(mm)
YC
(mm)

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightSteelNot Spec-designedBlack OxideS45CAF------5 ~ 200-3 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelNot Spec-designedBlack OxideS45CBF0 ~ 10-----5 ~ 200-3 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelNot Spec-designedBlack OxideS45CBF------5 ~ 2003 ~ 103 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightSteelNot Spec-designedBlack OxideS45CCF------5 ~ 200-3 ~ 162 ~ 50-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedSteelNot Spec-designedBlack OxideS45CDF--7 ~ 30---5 ~ 200-3 ~ 16--0.5 ~ 125---

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightSteelNot Spec-designedBlack OxideS45CEF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightSteelNot Spec-designedBlack OxideS45CFA------5 ~ 2003 ~ 16-------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelNot Spec-designedBlack OxideS45CFB-0 ~ 10----5 ~ 2003 ~ 16--0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelNot Spec-designedBlack OxideS45CFB------5 ~ 2003 ~ 163 ~ 10-0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightSteelNot Spec-designedBlack OxideS45CFC------5 ~ 2003 ~ 16--2 ~ 50----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedSteelNot Spec-designedBlack OxideS45CFD---7 ~ 30--5 ~ 2003 ~ 16----0.5 ~ 125--

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightSteelNot Spec-designedBlack OxideS45CFE------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightSteelNot Spec-designedBlack OxideS45CFF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (Set Screw Flat, D-Cut) / KeywayStraightSteelNot Spec-designedBlack OxideS45CFG-----2 ~ 305 ~ 2003 ~ 16--0 ~ 125---0 ~ 10

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (V Groove)StraightSteelNot Spec-designedBlack OxideS45CFH------5 ~ 2003 ~ 16--2 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (Set Screw Flat, D-Cut) / KeywayStraightSteelNot Spec-designedBlack OxideS45CGF----2 ~ 30-5 ~ 200-3 ~ 160 ~ 125---0 ~ 10-

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightSteelHardness RequirementBlack OxideS45CAF------5 ~ 200-3 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelHardness RequirementBlack OxideS45CBF0 ~ 10-----5 ~ 200-3 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelHardness RequirementBlack OxideS45CBF------5 ~ 2003 ~ 103 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightSteelHardness RequirementBlack OxideS45CCF------5 ~ 200-3 ~ 162 ~ 50-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedSteelHardness RequirementBlack OxideS45CDF--7 ~ 30---5 ~ 200-3 ~ 16--0.5 ~ 125---

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightSteelHardness RequirementBlack OxideS45CEF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (V Groove)StraightSteelNot Spec-designedBlack OxideS45CHF------5 ~ 200-3 ~ 162 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightSteelHardness RequirementBlack OxideS45CFA------5 ~ 2003 ~ 16-------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelHardness RequirementBlack OxideS45CFB-0 ~ 10----5 ~ 2003 ~ 16--0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightSteelHardness RequirementBlack OxideS45CFB------5 ~ 2003 ~ 163 ~ 10-0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightSteelHardness RequirementBlack OxideS45CFC------5 ~ 2003 ~ 16--2 ~ 50----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedSteelHardness RequirementBlack OxideS45CFD---7 ~ 30--5 ~ 2003 ~ 16----0.5 ~ 125--

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightSteelHardness RequirementBlack OxideS45CFE------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightSteelHardness RequirementBlack OxideS45CFF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (Set Screw Flat, D-Cut) / KeywayStraightSteelHardness RequirementBlack OxideS45CFG-----2 ~ 305 ~ 2003 ~ 16--0 ~ 125---0 ~ 10

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (V Groove)StraightSteelHardness RequirementBlack OxideS45CFH------5 ~ 2003 ~ 16--2 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (Set Screw Flat, D-Cut) / KeywayStraightSteelHardness RequirementBlack OxideS45CGF----2 ~ 30-5 ~ 200-3 ~ 160 ~ 125---0 ~ 10-

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (V Groove)StraightSteelHardness RequirementBlack OxideS45CHF------5 ~ 200-3 ~ 162 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304AF------5 ~ 200-3 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304BF0 ~ 10-----5 ~ 200-3 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304BF------5 ~ 2003 ~ 103 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304CF------5 ~ 200-3 ~ 162 ~ 50-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedStainless SteelNot Spec-designedNot ProvidedSUS304DF--7 ~ 30---5 ~ 200-3 ~ 16--0.5 ~ 125---

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304EF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304FA------5 ~ 2003 ~ 16-------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304FB-0 ~ 10----5 ~ 2003 ~ 16--0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304FB------5 ~ 2003 ~ 163 ~ 10-0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304FC------5 ~ 2003 ~ 16--2 ~ 50----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedStainless SteelNot Spec-designedNot ProvidedSUS304FD---7 ~ 30--5 ~ 2003 ~ 16----0.5 ~ 125--

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304FE------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightStainless SteelNot Spec-designedNot ProvidedSUS304FF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (Set Screw Flat, D-Cut) / KeywayStraightStainless SteelNot Spec-designedNot ProvidedSUS304FG-----2 ~ 305 ~ 2003 ~ 16--0 ~ 125---0 ~ 10

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (V Groove)StraightStainless SteelNot Spec-designedNot ProvidedSUS304FH------5 ~ 2003 ~ 16--2 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (Set Screw Flat, D-Cut) / KeywayStraightStainless SteelNot Spec-designedNot ProvidedSUS304GF----2 ~ 30-5 ~ 200-3 ~ 160 ~ 125---0 ~ 10-

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)AF------5 ~ 200-3 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)BF0 ~ 10-----5 ~ 200-3 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)BF------5 ~ 2003 ~ 103 ~ 160 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20Retaining Ring / TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)CF------5 ~ 200-3 ~ 162 ~ 50-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedShoulderedStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)DF--7 ~ 30---5 ~ 200-3 ~ 16--0.5 ~ 125---

-

1 Piece(s) 9 Day(s) 106 ~ 20Nut (Threaded) / TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)EF------5 ~ 2003 ~ 163 ~ 16------

-

1 Piece(s) 9 Day(s) 106 ~ 20Tapped / Set Screw (V Groove)StraightStainless SteelNot Spec-designedNot ProvidedSUS304HF------5 ~ 200-3 ~ 162 ~ 125-----

-

1 Piece(s) 9 Day(s) 106 ~ 20TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)FA------5 ~ 2003 ~ 16-------

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)FB-0 ~ 10----5 ~ 2003 ~ 16--0 ~ 125----

-

1 Piece(s) 9 Day(s) 106 ~ 20Cotter Pin / TappedStraightStainless SteelHardness RequirementNot ProvidedSUS440C (Equivalent)FB------5 ~ 2003 ~ 163 ~ 10-0 ~ 125----
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSShaft Dia. D
(mm)
Mounting Method Basic Shape Material Hardness Surface Treatment Material Detail Left End Shape Right End Shape G
(mm)
GC
(mm)
H
(mm)
HC
(mm)
K
(mm)
KC
(mm)
L
(mm)
M
(mm)
MC
(mm)
N
(mm)
NC
(mm)
T
(mm)
TC
(mm)
Y
(mm)
YC
(mm)

Loading...

Basic Information

Type L Dimension Configurable

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time