(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Post-Assembly Insertion Nut for 5 Series Aluminum Frames
- Volume Discount
Inexpensive post-assembly insertion nut that can be used without a stopper. Nuts coated with anti-loosening agents, nuts with conductive functions, etc., are available.
Part Number
Configured Part Number is shown.
Dimensional Drawing of Nuts
Single item sales Nuts | Sold in packs Nuts | |
| HNTF5 (equivalent to S10C) HNTFV5 (Nuts anti-loosening adhesive type, equivalent to S10C) HNTFZ5 (Nuts anti-loosening resin coating type, equivalent to S10C) HNTFSN5 (equivalent to SUS316, sintered) | PACK-HNTF5 (Nuts / Pack of 100) PACK-HNTFV5 (Nuts / Pack of 100) PACK-HNTFZ5 (Nuts / Pack of 100) PACK-HNTFSN5 (Nuts / Pack of 100) |
| Reference tightening torque (N・m) |  | ||
| M | Equivalent to S10C/Equivalent to SUS316 (sintered) | ||
| 5 | 6.8 | ||
| No | Nuts Type | [M] Material of Nuts | [S] Surface Treatment |
| ① | HNTF5 | Nuts Equivalent to S10C | Trivalent Chromate |
| PACK-HNTFZ5 | |||
| ② | HNTFV5 | ||
| PACK-HNTFV5 | |||
| ③ | HNTFZ5 | ||
| PACK-HNTFZ5 | |||
| ④ | HNTFSN5* | SUS316 equivalent (sintered) | − |
| PACK-HNTFSN5* |
Specification Table of Nuts
| Model of Nuts | − | M |
| HNTF5 | − | 4 |
| PACK-HNTF5 | − | 4 |
・To check the latest price, please click the "Check Price" button after confirming the model of Nuts number.
| Model of Nuts | M | T | |
| HNTF5 (equivalent to S10C) | 3 | 4 | 4.1 |
| HNTFV5 (loosening prevention, equivalent to S10C) | 4 | ||
| HNTFZ5 (loosening prevention, equivalent to S10C) | 4 | ||
| HNTFSN5 (equivalent to SUS316, sintered) | 3 | 4 | 5.0 |
・To check the latest price, please click the "Check Price" button after confirming the model of Nuts number.
| Model of Nuts | M (medium) | T | |
| PACK-HNTF5 | 3 | 4 | 4.1 |
| PACK-HNTFV5 | 4 | ||
| PACK-HNTFZ5 | 4 | ||
| PACK-HNTFSN5 | 3 | 4 | 5 |
Specifications Overview of Nuts
■ Anti-loosening type of Nuts
- This Nuts has a loosening prevention agent applied to the inside of the tap. This reduces loosening caused by vibrations during transportation or equipment operation.
- What is a loosening prevention adhesive? It is an anaerobic adhesive encapsulated in microcapsules. It effectively prevents loosening, but please note that it requires a hardening time (72 hours at room temperature 25°C) and that it isno longer effective once loosened.
- Nuts Resin coating is a coating of resin that conforms to the shape of the screw. Although it does not have the same locking effect as adhesive types, it can be used repeatedly without requiring hardening time.
■ Effects of anti-loosening agents (reference values)
| Features of Nuts | Release torque after tightening (1st time) | Supplementary information of Nuts | |||
|---|---|---|---|---|---|
| No anti-fouling agent applied | - | 5.2N・m | - | ||
| Anti-loosening adhesive type of Nuts | ・Effectively prevents loosening ・Nuts However, once loosened, the effect is lost ・After tightening, the adhesive needs time to harden (approximately 72 hours at room temperature 25℃) | 7.6N・m | Nuts Test conditions: Tightened to 6.8 Nm, dried at room temperature (25°C) for 72 hours, then loosened the bolts. Measured with HNTTV5-5 | ||
| Anti-loosening resin coated type of Nuts | - The Nuts anti-loosening effect can be used repeatedly (the anti-loosening effect will decrease with repeated use) - The anti-loosening effect is immediate after fastening | 6.5N・m | ・The Nuts loosening prevention effect decreases with repeated use. ・5th return torque: 6.2N・m (measured with HNTTZ5-5) | ||
* The torque values are for reference only. Values may vary depending on the clearance between the bolt and nut.
■ What the Nuts is conductive function?
- The conductive Nuts has a protrusion.
- When installed, the protrusions peel off the anodized coating on the aluminum frame, making it conductive.
Nuts, Bolts for Attaching Various Aluminum Frames and Panels/Brackets (M size - L size)
| Groove Width of Nuts | Frame angle | Depth h | Compatible Nuts | Thickness b (mm) of the panel/bracket to be attached to the frame | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.8 | 1 | 1.2 | 1.5 | 2 | 3 | 4 | 4.5 | 5 | 6 | 8.2 | 9 | 10 | 12 | 14 | ||||
| 6 | 20 | 6 | 5-3 | M3-6 | M3-8 | M3-10 | M3-12 | M3-15 | M3-18 | |||||||||
| 5-4 | M4-6 | M4-8 | M4-10 | M4-12 | M4-15 | M4-18 | ||||||||||||
| 5-5 | - | M5-8 | M5-10 | M5-12 | M5-15 | M5-18 | ||||||||||||
How to Use of Nuts
This product of Nuts is a post-insertion nut. It can be installed from the groove after assembly.
*The stainless steel type post-insertion Nuts cannot be used in combination with protruding brackets ( ) because they interfere with the protrusions of the protruding brackets. *The 5-5 size post-insertion nuts are not suitable because the outer part of the tap is thin and the fastening force is weak.Please use the 5-5 size post-insertion Nuts and stopper set .
Selection Support Information of Nuts
■ Compatible series of Nuts
This product of Nuts is compatible with Misumi 5 series (slot width 6 mm) aluminum frames.
5 Series
■ Difference between first-in and last-in
・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making bolt tightening easy.
Post-insertion of Nuts: Can be installed through the groove after assembly.
■ If the aluminum frame becomes stuck and cannot be removed
To remove the Nuts, hook the hex wrench into the hole in the nut and turn it at right angles to the groove.
■ Measures to prevent nuts from falling
- If the Nuts fall off when the aluminum frame is placed vertically, it is effective to use temporary fasteners (with leaf springs or ball springs).
- If you are using Nuts that do not have a temporary locking function, please use the post-insertion Nuts and stopper set .
Nuts 5 Series Related Parts
| Product name of Nuts | Aluminum frame | bracket | Blind Joint | Frame cap | Groove cover |
|---|---|---|---|---|---|
| Product pictured of Nuts |  |  |  |  |  |
| Product page of Nuts | Here | Here | Here | Here | Here |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| HNTF5-4 |
| HNTFSN5-4 |
| HNTFV5-4 |
| HNTFZ5-4 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nominal of Thread M (mm) | Material | Lock | Material | Surface Treatment | Sale Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 2.19 | 1 Piece(s) | Available | 1 Day(s) | 10 | M4 | Steel | Not Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts | |
MYR 2.04 | 1 Piece(s) | Available | 1 Day(s) | 10 | M4 | Stainless Steel | Not Provided | SUS316 Equivalent | - | Post-Assembly Insertion Nuts | |
MYR 2.42 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | M4 | Steel | Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts, Thread Locking Adhesive | |
MYR 2.42 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | M4 | Steel | Provided | S10C Equivalent | Trivalent Chromate | Post-Assembly Insertion Nuts, Thread Locking Plastic Coating |
Loading...
Basic Information
| Nut Type | Post-Assembly Insertion Nuts | Series | MISUMI 5 Series | Function | Short Nuts |
|---|---|---|---|---|---|
| Type | HFS |
Specification/Dimensions
-
Material
-
Lock
- Provided
- Not Provided
-
Material
-
Surface Treatment
-
Sale Type
- Post-Assembly Insertion Nuts
- Post-Assembly Insertion Nuts, Thread Locking Adhesive
- Post-Assembly Insertion Nuts, Thread Locking Plastic Coating
-
type
- HNTF5
- HNTFSN5
- HNTFV5
- HNTFZ5
-
Nominal of Thread M(mm)
- M3
- M4
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- 6 Series Stopper - Integrated Pre-Assembly Insertion Nut, Steel
- 6 Series Post-Assembly Insertion Nut with Leaf Spring, Steel
- Pre-Assembly Insertion Short Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm)
- For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Stoppers
- Straight-Line Connector For Aluminum Frames With Slot Width of 10 mm
- Nut (Stainless Steel Anti-Galling)
- Long Nut
- Long T Nut
Complementary Products
-
5 Series Aluminum Frame Reversing Bracket with Protrusion - 6mm Groove, 1-Row Groove
MISUMI Standard Price : MYR 2.42- Days to Ship : 1 Day(s) or more
-
Frame End Caps For 5 Series (Slot Width 6mm) Aluminum Frames
MISUMI Standard Price : MYR 7.70- Days to Ship : 1 Day(s) or more
-
Free Angle Brackets - For 5 Series (Slot Width 6mm) Aluminum Frames
MISUMI Standard Price : MYR 13.34- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
6 Series Post-Assembly Insertion Nut for Aluminum FramesMISUMI
Standard Price : MYR 2.30-
Days to Ship : 1 Day(s) or more
-
5 Series Aluminum Frame Reversing Bracket with Protrusion - 6mm Groove, 1-Row GrooveMISUMI
Standard Price : MYR 2.42-
Days to Ship : 1 Day(s) or more
-
5 Series Pre-Assembly Insertion Nut for Aluminum FramesMISUMI
Standard Price : MYR 1.09-
Days to Ship : 1 Day(s) or more
-
5 Series Post-Assembly Insertion Stopper NutMISUMI
Standard Price : MYR 1.70-
Days to Ship : 1 Day(s) or more
-
5 Series Post-Assembly Insertion Spring Nut for Aluminum FramesMISUMI
Standard Price : MYR 1.98-
Days to Ship : 1 Day(s) or more
-
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - NutsMISUMI
Standard Price : MYR 2.42-
Days to Ship : 1 Day(s) or more
-
5 Series Post-Assembly Insertion Nut/Stopper SetMISUMI
Standard Price : MYR 2.19-
Days to Ship : 1 Day(s) or more
-
Pre-Assembly Insertion Square Nuts - For 5 Series (Slot Width 6mm)MISUMI
Standard Price : MYR 69.41
Days to Ship : 2 Day(s)
-
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock NutsMISUMI
Standard Price : MYR 2.38-
Days to Ship : 1 Day(s) or more
-
Pre-Assembly Insertion Short Nuts for Aluminum Frames - For 5 Series (Slot Width 6mm)MISUMI
Standard Price : MYR 1.82-
Days to Ship : 1 Day(s) or more
-
5 Series Aluminum Frame Blind Bracket - 6mm SlotMISUMI
Standard Price : MYR 18.91-
Days to Ship : 1 Day(s) or more
-
5 Series Stopper - Integrated Pre-Assembly Insertion Nut, SteelMISUMI
Standard Price : MYR 2.09-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy