(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
[Automatic]X-axis linear ball (XCV620-PA-P)
![[Automatic]X-axis linear ball XCV620-PA-P](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302309510.jpg?$product_main$)
- Volume Discount
[Features]This is an automatic X-axis stage with high stiffness, a compact width and a space-saving overall length.
(i)Caution
- Please confirm the suitable power supply for each motor option.
5-Phase Stepping Motor with Brake (MA) works with single-phase AC100-120V.
α-Step Motor (PA) works with DC24V.
AC Servo Motor (U) works with single-phase or three-phase AC200-230V. - Please check the content on our website as the PDF does not contain the most up-to-date information.
- Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.
Part Number
Configured Part Number is shown.
XCV620-PA-P
[ M ] Material:SCM420 Alloy Steel Equivalent
[ S ] Surface Treatment: Electroless Nickel Plating
[ A ] Accessory: SCB4-10 (4 pcs.)
Specifications
| Part Number | - | Motor | - | Cable | |
| XCV620 | - | C | - | N |
| Part Number | Motor | Cable | Mechanical Standards | Accuracy Standards | |||||||
| Stage Surface (mm) | Travel Distance (mm) | Weight (kg) | Unidirectional Positioning Accuracy | Moment Rigidity ("/N•cm) | Pitching | Yawing | |||||
| Pitching | Yawing | Rolling | |||||||||
| XCV620 | C (Standard) F (High Torque) G (High Resolution) MA (With Electromagnetic Brake) PA (α-Step) | N (Cable not included (separately sold)) M (For Motor with Electromagnetic Brake) P (For α-Step) [ ! ]For combination of motors and cables, see the table below. | 60×60 | 20 | 0.72 (0.81) | 5µm or less | 0.08 | 0.05 | 0.05 | 20" or less | 15" or less |
| XCV630 | 60×70 | 30 | 0.82 (0.90) | 5µm or less | 0.06 | 0.05 | 0.05 | 20" or less | 15" or less | ||
*1: The value differs depending on the type of motor. The above raw values are for stages incorporating Motor C (Standard) and the values in ( ) for stages incorporating Motor F (High Torque).
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| XCV620-PA-P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Motor, Motor Characteristics | Resolution (µm) | Table Length (mm) | Stroke (X Distance) (mm) | Maximum Speed (mm/sec) | Moment Rigidity (Pitching) ("/N•cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 8,140.83 | 1 Piece(s) | 11 Day(s) or more | - | [α-Step Motor] α-Step Motor | 1µm | 60 | 20 | 20 | 0.08 |
Loading...
More Information
■Motor/Cable Application Table
| Motor/Cable Application Table | Motor | Cable |
| C,F,G | N (Not Provided) | |
| MA | M | |
| PA | P |
[ ! ]For the cable for C, F or G, see MSCB_on P.1-2014-3
■Max. speed
| Motor | (mm/sec) |
| C | 30 |
| F | 35 |
| G | 25 |
| MA | 25 |
| PA | 40 |
Note that the speed and positioning time will vary depending on the usage conditions.
The values shown here are MISUMI’s reference values. Operation at these values is not guaranteed.
| Type3 | After detection is executed in the CCW direction, the process of detecting in the CCW direction is begun based on the ORG signal. |
| Type4 | After detection is executed in the CW direction, the process of detecting in the CW direction is begun based on the ORG signal. |
| Type9 | After Type 3 is executed, the process of detecting in the CCW direction is begun based on the TIMING signal. |
| Type10 | After Type 4 is executed, the process of detecting in the CW direction is begun based on the TIMING signal. |
| Motor | C | F | G | MA | PA | |
| Standard | High Torque | High Resolution | With brake | Tuningless | ||
| Motor | Type | 5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.) | α- Step Motor | |||
| Step Angle | 0.72° | 0.72° | 0.36° | 0.72° | 0.36° | |
| Connector | Applicable Receptacle Connector | HR10A-10P-12S(73)(Hirose Electric Co., LTD.) | motor side:5557-06P-210 electromagnetic brake side: 5557-02P-210(MOLEX) | 43020-1000 (MOLEX) | ||
| Sensor | Limit Sensor | Provided | ||||
| Home Sensor | Photomicrosensor: EE-SX4320 (OMRON Corp.) | |||||
| Near Home Sensor | - | |||||
| Power Supply Voltage | DC5~24V ±5% | |||||
| Current Consumption | 60mA or less in Total | |||||
| Control Output | NPN Open Collector Output 30 V DC or less, 10 mA or less Residual Voltage 0.3V or less (when load current is 2mA) | |||||
| Output Logic | Detecting (Dark): Output Transistor OFF (Non-Conducting) | |||||
■Common Specifications
| Feed Screw | Ball Screw Ø8, Lead 1 | |
| Guide | Linear Ball Guide | |
| Resolution*2 | Full | 2μm/Pulse (1μm/Pulse) *3 1μm/Pulse (0.5μm/Pulse) *3 |
| Half | ||
| Fine (Upon 1/20 partitioned) | 0.1μm(0.05μm) | |
| Max. Speed*4 | 20mm/sec(30mm/sec)*5 (Pulse Rate: 5kHz) | |
| Positioning repeatability | ±0.5μm or less | |
| Load Capacity | 98N | |
| Lost Motion | 1μm or less | |
| Backlash | 1μm or less | |
| Straightness | 3μm or less | |
| Parallelism | 15μm or less | |
| Motion Parallelism | 10μm or less | |
*2 This represents the travel distance of stage per one pulse signal.
*3 The values in ( ) are for Motor Option G (High Resolution).
*4 This represents the max. speed that can be driven by the recommended controller switched to Full Step mode,
with the max. load applied. (The value differs depending on the current driving controller and the current load.)
*5 The values in ( ) are for Motor Option F (High Torque).
The value differs depending on the motor option.
Basic Information
| Type | X-Axis Motorized Stage | Material | SCM420 Alloy Steel Equivalent | Guide | Linear Ball Guide |
|---|---|---|---|---|---|
| Table Feeding Method | Ball Screw | Table Width(mm) | 60 | Surface Treatment | 无电解镀镍 |
| Through Hole (Table Center Hole) | Not Provided | Load Capacity (Range)(N) | 30.1~50 | Load Capacity(N) | 98 |
| Positioning Accuracy(µm) | 5 | Table Straightness(µm) | 3 | Table Parallelism(µm) | 15 |
| Moment Rigidity (Yawing)("/N•cm) | 0.05 | Moment Rigidity (Rolling)("/N•cm) | 0.05 | Sensor | Limit + Home |
Please check the type/dimensions/specifications of the part XCV620-PA-P in the [Automatic]X-axis linear ball series.
Specification/Dimensions
-
type
- XCV
-
Motor, Motor Characteristics
- 5-Phase Stepping Motor
- 5-Phase Stepping Motor - High Torque
- 5-Phase Stepping Motor - High Resolution
- α-Step Motor
-
Resolution(µm)
-
Table Length(mm)
-
Stroke (X Distance)(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| XCV620-C-N |
| XCV620-F-N |
| XCV620-G-N |
| XCV630-C-N |
| XCV630-F-N |
| XCV630-G-N |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Motor, Motor Characteristics | Resolution (µm) | Table Length (mm) | Stroke (X Distance) (mm) | Maximum Speed (mm/sec) | Moment Rigidity (Pitching) ("/N•cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 4,296.00 | 1 Piece(s) | 5 Day(s) | 10 | 5-Phase Stepping Motor | 2µm | 60 | 20 | 20 | 0.08 | ||
MYR 4,466.74 | 1 Piece(s) | 5 Day(s) | 10 | 5-Phase Stepping Motor - High Torque | 2µm | 60 | 20 | 30 | 0.08 | ||
MYR 4,353.33 | 1 Piece(s) | 5 Day(s) | 10 | 5-Phase Stepping Motor - High Resolution | 1µm | 60 | 20 | 20 | 0.08 | ||
MYR 4,636.24 | 1 Piece(s) | Available | 5 Day(s) | 10 | 5-Phase Stepping Motor | 2µm | 70 | 30 | 20 | 0.06 | |
MYR 4,805.74 | 1 Piece(s) | 5 Day(s) | 10 | 5-Phase Stepping Motor - High Torque | 2µm | 70 | 30 | 30 | 0.06 | ||
MYR 4,692.32 | 1 Piece(s) | 5 Day(s) | 10 | 5-Phase Stepping Motor - High Resolution | 1µm | 70 | 30 | 20 | 0.06 |
Additional Products in this Category
- [Motorized] X-Axis, Linear Ball Slide
- [Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 30 to 75
- [Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 100 to 300
- [Motorized] X-Axis - Cross Roller
- X-Axis Motorized Positioning Stages
- X-Axis Cross Roller Guide (KXC)
- X-axis Linear Ball Guide
- Motorized X Stage, Stage Surface 40 × 40 mm
Complementary Products
-
Shaft Collar (Wedge) - 2-Hole / 2-Tapped (Coarse)
MISUMI Standard Price : MYR 32.46- Days to Ship : 2 Day(s) or more
-
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI Standard Price : MYR 65.47- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
![[Motorized] X-Axis, Linear Ball Slide](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110300203370/110300203370_002.jpg?$product_recommend_b$)
[Motorized] X-Axis, Linear Ball SlideMISUMI
Standard Price : MYR 4,190.20-
Days to Ship : 8 Day(s) or more
-
Peripherals for Motorized Stages -Calbe for DV24V Input DriverMISUMI
Standard Price : MYR 109.67
Days to Ship : 8 Day(s) or more
-
Peripherals for Motorized Stages - Cable for Motorized StagesMISUMI
Standard Price : MYR 339.25-
Days to Ship : 8 Day(s) or more
-
Peripherals for Motorized Stages - Controller for Motorized StagesMISUMI
Standard Price : MYR 5,505.88-
Days to Ship : 8 Day(s) or more
-
![[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 30 to 75](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302632640.jpg?$product_recommend_b$)
[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 30 to 75MISUMI
Standard Price : MYR 5,200.81-
Days to Ship : 5 Day(s) or more
-
![[Motorized] XY-Axis, Linear Ball Slide](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110300203460/110300203460_003.jpg?$product_recommend_b$)
[Motorized] XY-Axis, Linear Ball SlideMISUMI
Standard Price : MYR 8,799.44-
Days to Ship : 8 Day(s) or more
-
-
![[Motorized] XYZ-Axis - Linear Ball](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110302524410/110302524410_001.jpg?$product_recommend_b$)
[Motorized] XYZ-Axis - Linear BallMISUMI
Standard Price : MYR 13,514.98-
Days to Ship : 10 Day(s) or more
-
![[Motorized] X-Axis - Cross Roller](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110303066030/110303066030_001.jpg?$product_recommend_b$)
[Motorized] X-Axis - Cross RollerMISUMI
Standard Price : MYR 9,013.76-
Days to Ship : 11 Day(s) or more
-
![[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 100 to 300](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302632730.jpg?$product_recommend_b$)
[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 100 to 300MISUMI
Standard Price : MYR 6,219.04-
Days to Ship : 5 Day(s) or more
-
![[Automatic]Z-Axis Linear Ball](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110300203550/110300203550_001.jpg?$product_recommend_b$)
-
![[Automatic]Z-Axis Crossed Roller Type -Stroke 30-](//content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110302760830/110302760830_001.jpg?$product_recommend_b$)
[Automatic]Z-Axis Crossed Roller Type -Stroke 30-MISUMI
Standard Price : MYR 9,652.75
Days to Ship : 11 Day(s) or more
![[Motorized] X-Axis, Linear Ball Slide](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110300203370/110300203370_002.jpg?$product_recommend_b$)
![[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 30 to 75](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302632640.jpg?$product_recommend_b$)
![[Motorized] XY-Axis, Linear Ball Slide](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110300203460/110300203460_003.jpg?$product_recommend_b$)
![[Motorized] XYZ-Axis - Linear Ball](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110302524410/110302524410_001.jpg?$product_recommend_b$)
![[Motorized] X-Axis - Cross Roller](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110303066030/110303066030_001.jpg?$product_recommend_b$)
![[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER, Stock 100 to 300](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302632730.jpg?$product_recommend_b$)
![[Automatic]Z-Axis Linear Ball](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110300203550/110300203550_001.jpg?$product_recommend_b$)
![[Automatic]Z-Axis Crossed Roller Type -Stroke 30-](http://content.misumi-ec.com/image/upload/t_product_recommend_b/v1/p/jp/product/series/110302760830/110302760830_001.jpg?$product_recommend_b$)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy