(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Bakelite Plates-Paper Type, Cloth Type
[Features]·These are phenol resin laminated plates with excellent insulation properties. [Alteration]Corner R processing, corner cutting, hole processing, etc., are possible.
Part Number
Configured Part Number is shown.
[ M ] Material: Bakelite (JIS PL-PEM)
| Type | [ M ]Material | Color | Operating Ambient Temperature |
| BLA | Paper-based Bakelite | Natural Color | -50~100°C |
| BLBA | Paper-based Bakelite | Black | |
| BLSA | Fabric-based Bakelite | Natural Color | -50~100°C |
Specifications
■Standard Type
• Circular Sawing
• Guaranteed Perpendicularity of
Circular Sawing
• 4-side Milling
• 6-surface Milling
• Upper-lower Surface Milling
■Pre-drilled Type
| Part Number | - | A | - | B | - | T |
| BLA BLBANTQ BLSA4FN BLA6FMM BLA2FN | - - - - - | 300 200.5 150.5 100.3 80 | - - - - - | 200 100.5 100.3 90.5 50 | - - - - - | 15 10 15 10.5 5 |
• Guaranteed Perpendicularity of
Circular Sawing
• 4-side Milling
• 6-surface Milling
• Upper-lower Surface Milling
■Pre-drilled Type
| Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. | - | L |
| BLA4H BLA4H | - - | 400 500 | - - | 325 300 | - - | 15 10 | - - | F300 F300 | - - | G200 G200 | - - | Z6 M5 | - | L7.5 |
Dimension Tolerance of A and B
T Dimension Tolerance, Rate of Camber and Torsion
Precision Guarantee
[ ! ]Reference plane stickers are attached to 4-side milled plates.
| A, B | A, B Dimension Tolerance |
| Unit: mm | |
| ~99 | ±0.5 |
| 100~250 | ±0.75 |
| 251~ | ±1.0 |
T Dimension Tolerance, Rate of Camber and Torsion
| T | T Dimension Tolerance | Rates of Camber and Torsion | |
| Paper Type | Fabric Type | per 1,000mm | |
| 2 | ±0.15 | ±0.25 | 3.0% or Less |
| 3 | ±0.20 | ±0.30 | 1.2% or Less |
| 4 | ±0.25 | ±0.35 | |
| 5 | ±0.30 | ±0.40 | 1.0% or Less |
| 6 | ±0.35 | ±0.50 | |
| 8 | ±0.40 | ±0.55 | 0.6% or Less |
| 10 | ±0.45 | ±0.65 | 0.5% or Less |
| 12 | ±0.50 | ±0.75 | |
| 15 | ±0.55 | ±0.80 | 0.4% or Less |
| 20 | ±0.70 | ±1.10 | 0.2% or Less |
Precision Guarantee
| Finish | Width Parallelism | Perpendicularity of Reference Plane |
| per 100mm | ||
| Guaranteed Perpendicularity of Circular Sawing (NT) | 0.1 | 0.1 |
| 4-side Milling (4F) | ||
| 6-surface Milling (6F) | ||
■Standard Type
| Part Number | A | B | T | |||||||
| Type | Finish | T Dimension Tolerance | A, B Dimension Tolerance | |||||||
| BLA BLBA BLSA | (Paper-based Bakelite, Natural Color) (Paper-based Bakelite, Black) (Cloth-based Bakelite, Natural Color) | Circular Sawing | 1mm Increment | Selection | ||||||
| - | Not available | Not available | 20~800 | 20~600 | 2, 3 , 4 , 5 , 6 , 8 , 10 , 12 , 15 , 20 | |||||
| Guaranteed Perpendicularity of Circular Sawing (NT) | 0.5mm Increment Unit | Selection | ||||||||
| NT | Not available | T2~10 | T12~20 | 20~500 | 20~400 | 2 , 3 , 4 , 5 , 6 , 8 , 10 , 12 , 15 , 20 | ||||
| Q | 0~+0.3 | 0~+0.4 | ||||||||
| N | ±0.2 | ±0.3 | ||||||||
| M | -0.3~0 | -0.4~0 | ||||||||
| 4-side Milling (4F) | 0.1mm Increment Unit | Selection | ||||||||
| 4F | Not available | Q | 0~+0.2 | 10~400 | 10~200 | 5 , 6 , 8 , 10 , 12 , 15 , 20 | ||||
| N | ±0.1 | |||||||||
| M | -0.2~0 | |||||||||
| 6-surface Milling (6F) | 0.1mm Increment Unit | 0.1mm Increment | ||||||||
| 6F | Q | 0~+0.2 | Q | 0~+0.2 | 10~400 | 10~200 | 5~19 | |||
| N | ±0.1 | N | ±0.1 | |||||||
| M | -0.2~0 | M | -0.2~0 | |||||||
| Upper-lower Surface Milling (2F) | 1mm Increment Unit | 0.1mm Increment | ||||||||
| 2F | Q | 0~+0.2 | Not available | 20~400 | 20~250 | 5~19 | ||||
| N | ±0.1 | |||||||||
| M | -0.2~0 | |||||||||
■Pre-drilled Type
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| Part Number | A | B | T | F | G | |||
| Type | T Dimension Tolerance | Number of Holes | ||||||
| BLA BLBA BLSA | (Paper-based Bakelite, Natural Color) (Paper-based Bakelite, Black) (Fabric-based Bakelite, Natural Color) | Circular Sawing | 1mm Increment | Dimension Selection | 0.5mm Increment | |||
| Not available | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20~800 | 20~600 | 2, 3, 4, 5, 6, 8, 10, 12, 15, 20 (Selectable) | 6~791.5 (2H, 4H) 4.5~595.5 (2HL) 6~395.5 (6H) | 4.5~595.5 (2H) 6~591.5 (2HL, 4H, 6H) | ||
| Upper-lower Surface Milling (2F) | 1mm Increment | 0.1mm Increment | 0.5mm Increment | |||||
| 2FQ 0~+0.22 2FN ±0.12 2FM -0.2~0 | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20~400 | 20~250 | 5~19 (0.1mm Increment) | 6~391.5 (2H, 4H) 4.5~395.5 (2HL) 6~195.5 (6H) | 4.5~245.5 (2H) 6~241.5 (2HL, 4H, 6H) | ||
| T Dimension | Pre-drilled Hole Nominal Dia. | ||||||||||||
| N (Through) | Z (Counterbore Hole) | M (Threaded Insert) | L (Insert Length) | ||||||||||
| 2~4 | 3 4 5 6 8 10 | - | - | - | |||||||||
| 5 | - | 3 | 4 | Select from Table 1 | |||||||||
| 6, 7 | 3 | 3 | 4 | 5 | 6 | ||||||||
| 8, 9 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 8 | |||||
| 10~14 | 4 | 5 | 6 | 3 | 4 | 5 | 6 | 8 | 10 | ||||
| 15~20 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | |||
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BLA2FM2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FM2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FM2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FM2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FM2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FM2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FM4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FM4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FM4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FM6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FM6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FM6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FM-[20-400/1]-[20-250/1]-[5-19/0.1] |
| BLA2FN2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FN2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FN2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FN2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FN2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FN2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FN4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FN4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FN4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FN6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FN6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FN6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FN-[20-400/1]-[20-250/1]-[5-19/0.1] |
| BLA2FQ2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FQ2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FQ2H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FQ2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FQ2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FQ2HL-[20-400/1]-[20-250/1]-[5-19/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FQ4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FQ4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FQ4H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FQ6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10] |
| BLA2FQ6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10] |
| BLA2FQ6H-[20-400/1]-[20-250/1]-[5-19/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8] |
| BLA2FQ-[20-400/1]-[20-250/1]-[5-19/0.1] |
| BLA2H-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[6-991.5/0.5]-G[4.5-995.5/0.5]-M[3,4,5,6,8,10] |
| BLA2H-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[6-991.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10] |
| BLA2H-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[6-991.5/0.5]-G[4.5-995.5/0.5]-Z[3,4,5,6,8] |
| BLA2HL-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[4.5-995.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8,10] |
| BLA2HL-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[4.5-995.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| BLA2HL-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[4.5-995.5/0.5]-G[6-991.5/0.5]-Z[3,4,5,6,8] |
| BLA4FM-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,12,15,20,30] |
| BLA4FN-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,12,15,20,30] |
| BLA4FQ-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,12,15,20,30] |
| BLA4H-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[6-991.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8,10] |
| BLA4H-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[6-991.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| BLA4H-[20-1000/1]-[20-1000/1]-[2,3,4,5,6,8,10,12,15,20,30]-F[6-991.5/0.5]-G[6-991.5/0.5]-Z[3,4,5,6,8] |
| BLA6FMM-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FMN-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FMQ-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FNM-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FNN-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FNQ-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FQM-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FQN-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| BLA6FQQ-[10-400/0.1]-[10-200/0.1]-[5-19/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Grade | Color | Hole Machining | Finishing | T Dimension Tolerance | AB Dimension Tolerance | Material Name | A (mm) | B (mm) | Counterbored Hole Nominal Dia. [Z] | F (mm) | G (mm) | Nominal Dia. of Threaded Insert [M] | T (mm) | Through Hole Nominal Dia. [N] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 4.5 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 4.5 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 391.5 | 4.5 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 4.5 ～ 395.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 4.5 ～ 395.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 4.5 ～ 395.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 391.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 195.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 195.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | Upper-lower Surface Milling | M (0/-0.2) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 4.5 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 4.5 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 391.5 | 4.5 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 4.5 ～ 395.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 4.5 ～ 395.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 4.5 ～ 395.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 391.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 195.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 195.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | Upper-lower Surface Milling | N (±0.1) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 4.5 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 4.5 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 391.5 | 4.5 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 4.5 ～ 395.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 4.5 ～ 395.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 4.5 ～ 395.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 391.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 4H | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 391.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | 5 ～ 19 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | 6 ～ 195.5 | 6 ～ 245.5 | - | 5 ～ 19 | 3 ～ 10 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Paper | Natural Color | 6H | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | 3 ～ 8 | 6 ～ 195.5 | 6 ～ 245.5 | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | Upper-lower Surface Milling | Q (+0.2/0) | - | Paper-based Bakelite | 20 ～ 400 | 20 ～ 250 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | - | 6 ～ 991.5 | 4.5 ～ 995.5 | 3 ～ 10 | 2 ～ 30 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | - | 6 ～ 991.5 | 4.5 ～ 995.5 | - | 2 ～ 30 | 3 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Horizontal | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | 3 ～ 8 | 6 ～ 991.5 | 4.5 ～ 995.5 | - | 2 ～ 30 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | - | 4.5 ～ 995.5 | 6 ～ 991.5 | 3 ～ 10 | 2 ～ 30 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | - | 4.5 ～ 995.5 | 6 ～ 991.5 | - | 2 ～ 30 | 3 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 2 Holes, Vertical | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | 3 ～ 8 | 4.5 ～ 995.5 | 6 ～ 991.5 | - | 2 ～ 30 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | - | M (0/-0.2) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 30 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | - | N (±0.1) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 30 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | - | Q (+0.2/0) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 30 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 4H | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | - | 6 ～ 991.5 | 6 ～ 991.5 | 3 ～ 10 | 2 ～ 30 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 4H | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | - | 6 ～ 991.5 | 6 ～ 991.5 | - | 2 ～ 30 | 3 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | Paper | Natural Color | 4H | Circular Sawing | - | - | Paper-based Bakelite | 20 ～ 1000 | 20 ～ 1000 | 3 ～ 8 | 6 ～ 991.5 | 6 ～ 991.5 | - | 2 ～ 30 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | M (0/-0.2) | M (0/-0.2) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | M (0/-0.2) | N (±0.1) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | M (0/-0.2) | Q (+0.2/0) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | N (±0.1) | M (0/-0.2) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | N (±0.1) | N (±0.1) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | N (±0.1) | Q (+0.2/0) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | Q (+0.2/0) | M (0/-0.2) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | Q (+0.2/0) | N (±0.1) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Paper | Natural Color | No Drilling Alteration | 5-side Milling | Q (+0.2/0) | Q (+0.2/0) | Paper-based Bakelite | 10 ～ 400 | 10 ～ 200 | - | - | - | - | 5 ～ 19 | - |
Loading...
More Information
[ ! ]Properties >> P.955
Basic Information
| Material | Bakelite |
|---|
Specification/Dimensions
-
Color
- Black
- Natural Color
-
Hole Machining
-
Finishing
- 5-side Milling
- 7-surface Milling
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milling
-
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
AB Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
Material Name
-
A(mm)
-
B(mm)
-
Counterbored Hole Nominal Dia. [Z]
-
F(mm)
-
G(mm)
-
Nominal Dia. of Threaded Insert [M]
-
T(mm)
-
Through Hole Nominal Dia. [N]
-
type
- BLA
- BLA2FM
- BLA2FM2H
- BLA2FM2HL
- BLA2FM4H
- BLA2FM6H
- BLA2FN
- BLA2FN2H
- BLA2FN2HL
- BLA2FN4H
- BLA2FN6H
- BLA2FQ
- BLA2FQ2H
- BLA2FQ2HL
- BLA2FQ4H
- BLA2FQ6H
- BLA2H
- BLA2HL
- BLA4FM
- BLA4FN
- BLA4FQ
- BLA4H
- BLA6FMM
- BLA6FMN
- BLA6FMQ
- BLA6FNM
- BLA6FNN
- BLA6FNQ
- BLA6FQM
- BLA6FQN
- BLA6FQQ
- BLA6H
- BLANTM
- BLANTN
- BLANTQ
- BLBA
- BLBA2FM
- BLBA2FM2H
- BLBA2FM2HL
- BLBA2FM4H
- BLBA2FM6H
- BLBA2FN
- BLBA2FN2H
- BLBA2FN2HL
- BLBA2FN4H
- BLBA2FN6H
- BLBA2FQ
- BLBA2FQ2H
- BLBA2FQ2HL
- BLBA2FQ4H
- BLBA2FQ6H
- BLBA2H
- BLBA2HL
- BLBA4FM
- BLBA4FN
- BLBA4FQ
- BLBA4H
- BLBA6FMM
- BLBA6FMN
- BLBA6FMQ
- BLBA6FNM
- BLBA6FNN
- BLBA6FNQ
- BLBA6FQM
- BLBA6FQN
- BLBA6FQQ
- BLBA6H
- BLBANTM
- BLBANTN
- BLBANTQ
- BLSA
- BLSA2FM
- BLSA2FM2H
- BLSA2FM2HL
- BLSA2FM4H
- BLSA2FM6H
- BLSA2FN
- BLSA2FN2H
- BLSA2FN2HL
- BLSA2FN4H
- BLSA2FN6H
- BLSA2FQ
- BLSA2FQ2H
- BLSA2FQ2HL
- BLSA2FQ4H
- BLSA2FQ6H
- BLSA2H
- BLSA2HL
- BLSA4FM
- BLSA4FN
- BLSA4FQ
- BLSA4H
- BLSA6FMM
- BLSA6FMN
- BLSA6FMQ
- BLSA6FNM
- BLSA6FNN
- BLSA6FNQ
- BLSA6FQM
- BLSA6FQN
- BLSA6FQQ
- BLSA6H
- BLSANTM
- BLSANTN
- BLSANTQ
-
Grade
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Fluororesin Tapes-(Sliding, Dust-proof)
- POM-NC plate (Natural)
- POM Hyper (POM-NC(HY)) Sheet
- Semitron ESd520HR PAI Sheet
- TOMBO No. 9000 NAFLON PTFE Sheet (Skived)
- Uni Sunday Transparent PVC Punching Board
- PS (Polystyrene) Sheet
- Resin Plate - AcrySunday
Complementary Products
Customers Who Viewed This Item Also Viewed
-
MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance GradeMISUMI
Days to Ship : 5 Day(s) or more
-
-
-
Configurable Plates - Aluminum - A5052P (Aℓ-Mg Aluminum Alloy)MISUMI
Days to Ship : 5 Day(s) or more
-
-
-
-
-
Ultra High-Molecular-Weight Polyethylene Plates-Standard / Conductive GradeMISUMI
Days to Ship : 5 Day(s) or more
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy