(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Flanged Linear Bushing - Standard, Center Flanged, Double[RoHS Compliant] (C-LHMSWM10)
![Flanged Linear Bushing - Standard, Center Flanged, Double[RoHS Compliant] C-LHMSWM10](http://content.misumi-ec.com/image/upload/t_product_main/t_misumi_wm/v1/p/jp/product/series/110310282689/110310282689_20230816170415.jpg?$product_main$)
- Volume Discount
MiSUMi Economy
RoHS10 compliant.
Medium-precision linear bushing with relaxed O.D. tolerances such as I.D. and L dimension.
(i)Caution
- Bushings are applied with anti-rust oil harmless to lubricants. After cleaning (recommended cleaning method: ultrasonic cleaner or white kerosene) and drying the bushings, grease application is recommended before use.
- Some of the current product code is scheduled to be discontinued by end of Jul 2025.
We apologize for the inconvenience. Similar alternative products will be posted after the date.
Part Number
Configured Part Number is shown.
C-LHMSWM10
Dimensional Drawing of Linear Bushings
| Type Linear Bushings | Outer Cylinder | Balls | Retainer | Operating Ambient Temperature | [A] Accessory | |||||
| Round Flange | Square flange | Compact Flange | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | [M] Material | |||
| Standard Specification | C-LHMRW | C-LHMSW | C-LHMCW | SUJ2 Equivalent | 58HRC or more | — | SUJ2 Equivalent | Plastic | －20 to 80°C | Seal [M] Material Nitrile Rubber |
| C-LHMRWM | C-LHMSWM | C-LHMCWM | Electroless Nickel Plating | |||||||
| High Temperature Specifications | — | C-LHMSWF-N | — | — | Stainless Steel | －20 to 120°C | — | |||
| C-LHMRWMF-N | — | — | Electroless Nickel Plating | |||||||
Specification Table of Linear Bushings
| Ordering Example | Part Number (Type, dr) | |
| C-LHMRW20 C-LHMSWM30 |
| dr | D | L | (ℓ) | H | (T) | d | d1 | t | P.C.D. | W | F | A | K | Eccentricity (Max.) | Balls Rows | * Perpendicularity | Basic Load Rating | Allowable Static Moment (N⋅m) | Reference Mass (g) | |||||||
| Tolerance | Surface Treatment Not Provided Tolerance | Surface Treatment Provided Tolerance | Tolerance | |||||||||||||||||||||||
| C (Dynamic) N | Co (Static) N | Round Flange | Square flange | Compact Flange | ||||||||||||||||||||||
| 6 | +0.003 -0.013 | 12 | +0.006 -0.013 | +0.006 -0.020 | 35 | ±0.6 | 15 | 28 | 5 | 3.5 | 6 | 3.1 | 20 | 22 | — | 20 | 18 | 0.03 | 4 | 0.03 | 324 | 529 | 2.18 | 31 | 25 | 28 |
| 8 | 15 | 45 | 20 | 32 | 24 | 25 | — | 24 | 21 | 431 | 784 | 4.31 | 51 | 43 | 47 | |||||||||||
| 10 | 19 | +0.006 -0.018 | +0.006 -0.023 | 55 | 24.5 | 40 | 6 | 4.5 | 7.5 | 4.1 | 29 | 30 | — | 29 | 25 | 588 | 1100 | 7.24 | 98 | 78 | 90 | |||||
| 12 | 21 | 57 | 25.5 | 42 | 32 | 32 | — | 32 | 27 | 657 | 1200 | 10.9 | 110 | 90 | 102 | |||||||||||
| 13 | 23 | 61 | 27.5 | 43 | 33 | 34 | — | 33 | 29 | 813 | 1570 | 11.6 | 130 | 108 | 123 | |||||||||||
| 16 | 28 | 70 | 32 | 48 | 38 | 37 | 22 | 31 | 34 | 5 | 1230 | 2350 | 19.7 | 190 | 165 | 182 | ||||||||||
| 20 | +0.003 -0.015 | 32 | +0.006 -0.021 | +0.006 -0.027 | 80 | 36 | 54 | 8 | 5.5 | 9 | 5.1 | 43 | 42 | 24 | 36 | 38 | 0.04 | 0.04 | 1400 | 2740 | 26.8 | 260 | 225 | 247 | ||
| 25 | 40 | 112 | 52 | 62 | 51 | 50 | 32 | 40 | 46 | 6 | 1560 | 3140 | 43.4 | 540 | 500 | 525 | ||||||||||
| 30 | 45 | 123 | 56.5 | 74 | 10 | 6.6 | 11 | 6.1 | 60 | 58 | 35 | 49 | 51 | 2490 | 5490 | 82.8 | 680 | 590 | 645 | |||||||
| 35 | +0.003 -0.018 | 52 | +0.006 -0.024 | +0.006 -0.032 | 135 | 62.5 | 82 | 67 | 64 | 38 | 55 | 60 | 0.05 | 0.05 | 2650 | 6270 | 110 | 1020 | 930 | 945 | ||||||
| 40 | 60 | 151 | 69 | 96 | 13 | 9 | 14 | 8.1 | 78 | 75 | 45 | 64 | 70 | 3430 | 8040 | 147 | 1570 | 1380 | 1423 | |||||||
| (50) | 80 | 192 | 89.5 | 116 | 98 | 92 | — | — | — | 6080 | 15900 | 397 | 3600 | 3400 | - | |||||||||||
[ ! ] Only round and square flanges can be selected for dr () dimensions
[ ! ] Anti-rust oil is applied at the time of delivery.
[ ! ] Flanged Type Height-Adjusting Spacers can be selected from here.
[ ! ] For shaft and housing tolerances, see "Recommended Tolerance of Shaft Diameter / Housing Diameter."
■Available Sizes of Linear Bushings
| Specifications | Standard | High Temperature | ||||||
| Surface Treatment | Not Provided | Provided | Not Provided | Provided | ||||
| Flange Shape | Round Flange | Square flange | Compact Flange | Round Flange | Square flange | Compact Flange | Square flange | Round Flange |
| dr | C-LHMRW | C-LHMSW | C-LHMCW | C-LHMRWM | C-LHMSWM | C-LHMCWM | C-LHMSWF-N | C-LHMRWMF-N |
| 6 | ● | ● | ● | ● | ● | ● | ● | ● |
| 8 | ● | ● | ● | ● | ● | ● | ● | ● |
| 10 | ● | ● | ● | ● | ● | ● | ● | ● |
| 12 | ● | ● | ● | ● | ● | ● | ● | ● |
| 13 | ● | ● | ● | ● | ● | ● | ● | ● |
| 16 | ● | ● | ● | ● | ● | ● | ● | ● |
| 20 | ● | ● | ● | ● | ● | ● | ● | ● |
| 25 | ● | ● | ● | ● | ● | ● | ● | ● |
| 30 | ● | ● | ● | ● | ● | ● | ● | ● |
| * 35 | ● | ● | ● | ● | ● | ● | ||
| * 40 | ● | ● | ● | ● | ● | ● | ||
| * (50) | ● | ● | ● | ● | ||||
[ ! ] Only round and square flanges can be selected for dr () dimensions.
■Recommended Tolerance of Shaft Diameter / Housing Diameter of Linear Bushings
| dr | Shaft Dia. | Housing Dia. | |
| g6 Tolerance | Tolerance | ||
| 6 | −0.004 −0.012 | 12 | +0.024 +0.006 |
| 8 | −0.005 −0.014 | 15 | |
| 10 | 19 | +0.027 +0.006 | |
| 12 | −0.006 −0.017 | 21 | |
| 13 | 23 | ||
| 16 | 28 | ||
| 20 | −0.007 −0.020 | 32 | +0.031 +0.006 |
| 25 | 40 | ||
| 30 | 45 | ||
| 35 | −0.009 −0.025 | 52 | +0.036 +0.006 |
| 40 | 60 | ||
| 50 | 80 | ||
Product Summary of Linear Bushings
[Features of Linear Bushings]
♢ Get up to 50% discount on similar products from our company by purchasing in bulk! !
[Product comparison information of Linear Bushings]
♢There are some differences in specifications with our similar products. Please be careful when selecting.
The dimensional tolerances of the inner diameter (dr) and outer diameter (D) have been improved to the same tolerance as our similar products.
*Perpendicularity between part D and flange mounting surface
[Price comparison with our similar products of Linear Bushings]
♢ Get up to 50% discount on similar products from our company by purchasing in bulk! !
[Product comparison information of Linear Bushings]
♢There are some differences in specifications with our similar products. Please be careful when selecting.
The dimensional tolerances of the inner diameter (dr) and outer diameter (D) have been improved to the same tolerance as our similar products.
| Our similar product LHMRWMF20 | Economy series C-LHMRWMF-N20 | |
| Inner diameter tolerance | 0－0.012 | 0－0.012 |
| Outer diameter tolerance | 0－0.019 | 0－0.019 |
| Total length tolerance | ±0.3 | ±0.6 |
| Eccentricity (maximum) | 0.02 | 0.04 |
| *right angle | 0.02 | 0.04 |
[Price comparison with our similar products of Linear Bushings]
| Order quantity | Our similar product LHMCWM8 | This product C-LHMCWM8 | price reduction rate |
| 1 | 1860 | 1100 | 41% |
| 51 | 1674 | 990 | 41% |
| 101 | 1525 | 770 | 50% |
■Detailed example of discount rate of Linear Bushings
To check the price and delivery date by quantity for each model number, please click Check Price after confirming the model number.
| Order quantity | Discount rate C-LHMCWM8 |
| 1-50 | - |
| 51～100 | 10% |
| 101～1000 | 30% |
Cautions/Prohibitions of Linear Bushings
■Regular maintenance of Linear Bushings
① For grease lubrication, apply grease to the ball rows on the inner surface of the linear bushing before use, and then lubricate at appropriate times.
Grease forms an oil film on the surfaces of the steel balls and raceway surfaces (shaft bushing) of linear bushings, reducing friction and preventing seizure.
Grease loss and deterioration greatly affect the lifespan of linear bushings.
② Recommended lubrication grease: Lithium-based soap-based grease
③ Recommended lubrication interval: Normally every 6 months
If the mileage is long, we recommend lubrication every 3 months, and if the mileage exceeds 1000km within the period, we recommend lubrication every 1000km.
④If a large moment load (unbalanced load) is applied to the linear bushing, it is not suitable to use the single type alone.
We recommend using a double type or multiple single types.
■Dust-proof measures of Linear Bushings
Please be aware that if foreign matter or dust gets inside the linear bushing, it will interfere with the circulation of the steel balls and cause an unexpected accident.
When using the product in harsh environments, attach a dustproof cover or protective cover.
■We recommend a hardened shaft with G6 tolerance for Miss Millinar Bush.
① For grease lubrication, apply grease to the ball rows on the inner surface of the linear bushing before use, and then lubricate at appropriate times.
Grease forms an oil film on the surfaces of the steel balls and raceway surfaces (shaft bushing) of linear bushings, reducing friction and preventing seizure.
Grease loss and deterioration greatly affect the lifespan of linear bushings.
② Recommended lubrication grease: Lithium-based soap-based grease
③ Recommended lubrication interval: Normally every 6 months
If the mileage is long, we recommend lubrication every 3 months, and if the mileage exceeds 1000km within the period, we recommend lubrication every 1000km.
④If a large moment load (unbalanced load) is applied to the linear bushing, it is not suitable to use the single type alone.
We recommend using a double type or multiple single types.
■Dust-proof measures of Linear Bushings
Please be aware that if foreign matter or dust gets inside the linear bushing, it will interfere with the circulation of the steel balls and cause an unexpected accident.
When using the product in harsh environments, attach a dustproof cover or protective cover.
■We recommend a hardened shaft with G6 tolerance for Miss Millinar Bush.
How to Use of Linear Bushings
| Illustration | Instructions for use |
 | If a large load (unbalanced load) is applied to the linear bushing, it is not suitable to use the single type alone. We recommend using a double type or multiple single types. |
 | Linear Bushings are not suitable for rotational motion due to their structure. Please be careful not to force the rotation as it may cause damage. |
| Linear Bushings are not suitable for applications where they are repeatedly inserted and removed. | |
| When inserting the shaft into the linear bushing, if the shaft is inserted in a strained state, the balls may fall off or the retainer may become deformed, so please align the centers and insert it gently. |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-LHMSWM10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Inscribed Circle Dia. dr (Ø) | Overall Length L (mm) | Outer Cylinder Surface Treatment | Outer Dia. D (Ø) | Eccentricity (µm) | Basic Load Rating: Dynamic Load (Details) (N) | Basic Load Rating: Static Load (N) | Inscribed Circle Dia. Tolerance (Negative Side) (mm) | Flange Shape | Retainer Material | Seal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 91.51 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 10 | 55 | [Surface Treatment] Electroless nickel plating | 19 | 30 | 588 | 1100 | -0.013 | Square Flange | Plastic | With Seal |
Loading...
Cautions/Prohibitions
■Regular Maintenance
(1) For grease lubrication, apply grease to the ball rows within the linear bushings before use, then periodically apply grease during the use.
The grease has an effect of reducing friction by forming a layer between the balls and shaft rolling surfaces, preventing seizures.
Grease loss and deterioration will cause shorter life of linear guides.
(2) Recommended Grease: Lithium soap based grease
(3) Recommended Lubrication Intervals: Every 6 months
Recommended lubrication is that every 3 months when travel distance is extensive, or every 1000 km when travel distance exceeds 1000 km within the period.
(4) If large moment load (offset load) is to be applied, Short / Single Type Linear Bushings are not suitable.
Use of Double Type or Multiple Linear Bushings is recommended.
■Dust-Proofing Measures
Please be aware that if foreign objects or dusts get inside the linear bushing, it will interfere with the circulation of the steel balls and cause failures.
Please attach a dust cover or protection cover for harsh usage environments.
■Use of a hardened shaft with g6 tolerance is recommended for MISUMI Linear Bushings.
(1) For grease lubrication, apply grease to the ball rows within the linear bushings before use, then periodically apply grease during the use.
The grease has an effect of reducing friction by forming a layer between the balls and shaft rolling surfaces, preventing seizures.
Grease loss and deterioration will cause shorter life of linear guides.
(2) Recommended Grease: Lithium soap based grease
(3) Recommended Lubrication Intervals: Every 6 months
Recommended lubrication is that every 3 months when travel distance is extensive, or every 1000 km when travel distance exceeds 1000 km within the period.
(4) If large moment load (offset load) is to be applied, Short / Single Type Linear Bushings are not suitable.
Use of Double Type or Multiple Linear Bushings is recommended.
■Dust-Proofing Measures
Please be aware that if foreign objects or dusts get inside the linear bushing, it will interfere with the circulation of the steel balls and cause failures.
Please attach a dust cover or protection cover for harsh usage environments.
■Use of a hardened shaft with g6 tolerance is recommended for MISUMI Linear Bushings.
How to Use
| Illustration | Instructions for Use |
| If large load (offset load) is to be applied, Single Type Linear Bushings are not suitable. Use of Double Type or Multiple Linear Bushings is recommended. |
| Linear Bushings are not suitable for rotating motion due to their structure. Forcing to rotate may cause failures. |
 | Linear Bushings are not suitable for usage with repetitive insertion and extraction of shafts. |
 | When assembling with linear shafts, forcing the shaft into the bushing with angular misalignment may cause the ball retainers to deform and balls to fall out. Be sure to align the centers and insert the shaft gently. |
Basic Information
| Type | Center Flange | Flange Type | Center Flanged | Lubrication Type | Not Provided |
|---|---|---|---|---|---|
| Types | Center Flanged | Length | Double | Linear Motion / Rotational Motion | Linear Bushing (Linear Motion Only) |
| Ball Material | SUJ2 Equivalent |
Please check the type/dimensions/specifications of the part C-LHMSWM10 in the Flanged Linear Bushing - Standard, Center Flanged, Double[RoHS Compliant] series.
Specification/Dimensions
-
type
- C-LHMCW
- C-LHMCWM
- C-LHMRW
- C-LHMRWM
- C-LHMRWMF-N
- C-LHMSW
- C-LHMSWF-N
- C-LHMSWM
-
Inscribed Circle Dia. dr(Ø)
-
Overall Length L(mm)
-
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Outer Dia. D(Ø)
-
Eccentricity(µm)
-
Flange Shape
- Round Flange
- Square Flange
- Compact Flange
-
Retainer Material
- Plastic
- Stainless Steel
-
Seal
- No Seal
- With Seal
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| C-LHMCW16 |
| C-LHMCW20 |
| C-LHMCW25 |
| C-LHMSWM12 |
| C-LHMSWM13 |
| C-LHMSWM16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Inscribed Circle Dia. dr (Ø) | Overall Length L (mm) | Outer Cylinder Surface Treatment | Outer Dia. D (Ø) | Eccentricity (µm) | Basic Load Rating: Dynamic Load (Details) (N) | Basic Load Rating: Static Load (N) | Inscribed Circle Dia. Tolerance (Negative Side) (mm) | Flange Shape | Retainer Material | Seal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 77.24 | 1 Piece(s) | 11 Day(s) | 10 | 16 | 70 | No Surface Treatment | 28 | 30 | 1,230 | 2350 | -0.013 | Compact Flange | Plastic | With Seal | ||
MYR 82.04 | 1 Piece(s) | 11 Day(s) | 10 | 20 | 80 | No Surface Treatment | 32 | 40 | 1400 | 2740 | -0.015 | Compact Flange | Plastic | With Seal | ||
MYR 109.54 | 1 Piece(s) | 11 Day(s) | 10 | 25 | 112 | No Surface Treatment | 40 | 40 | 1560 | 3,140 | -0.015 | Compact Flange | Plastic | With Seal | ||
MYR 99.58 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 12 | 57 | [Surface Treatment] Electroless nickel plating | 21 | 30 | 657 | 1200 | -0.013 | Square Flange | Plastic | With Seal | |
MYR 109.29 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 20 | 61 | [Surface Treatment] Electroless nickel plating | 23 | 30 | 813 | 1570 | -0.013 | Square Flange | Plastic | With Seal | |
MYR 126.05 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 16 | 70 | [Surface Treatment] Electroless nickel plating | 28 | 30 | 1,230 | 2350 | -0.013 | Square Flange | Plastic | With Seal |
Additional Products in this Category
- Linear Bushings - Medium
- Housing Units with Clamp Lever - Tall Blocks - Single/Double, Right/Left Clamp Lever
- Linear Bushings - Double
- Linear Bushing LMH Type (Flange Type / Oval)
- Miniature Linear Bushing LMS Series
- Maintenance-freeflanged linear bushingsLFDTC-MF shapedoublecenter positionT shaped flange
- Maintenance-freelinear bushing housingLHW-MF shapedoublealuminum case
- Flanged linear bushingLFDTM shape(Eco series)doubleT shaped flange
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy