(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Nylon Coated Cam Followers (C-CFFRUCS5-13)
- Volume Discount
(i)Caution
- Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.
Part Number
Configured Part Number is shown.
C-CFFRUCS5-13
Economy Nylon Coated Cam Followers
- Superior resistance to corrosion due to nylon coating. Ideal for use in environments where metal components may suffer from corrosion, extending operational life.
- Nylon coating helps in reducing operational noise. Effective in minimizing noise during rotation, which is crucial for noise-sensitive applications.
- Even load distribution due to nylon coating. The coating helps in reducing stress concentrations and improving stability during operation.
- Screw with multiple size options
- Capable of handling significant radial loads and high rotational speeds.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Roller Followers Product Overview
Roller Followers Product Feature
1. MISUMI's embedded "Grooving" Roller Followers technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Test Method
Try to make the inclination of the cam follower with resin as zero as possible.【Roller Followers Material Features】
| Item | Urethane | MC Nylon |
| Load Resistant | △ | ○ |
| Abrasion Resistant | ○ | △ |
| Mechanical Strength | ○ | ◎ |
| Heat Resistance | × | △ |
| Chemical-Resistant | × | ○ |
Roller Followers Dimensional Drawing
| Roller Followers Type |  Roller Followers Material |  Roller Followers Accessories | |
| With seal | Resin | Cam follower | |
| C－CFFRUCS | Nylon | SUJ2 | 1 hexagon socket nut (S45C·ferroferric oxide protective film) |
Operating environment at ambient temperature below 80 ℃.No grease replenishing hole is provided for d16 and below.
 Roller Followers Type |  dh7 Tolerance |  D Selection | M×Pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUCS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 504 | 1960 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 555 | 1760 | |
| 26 | 10×1.0 | 592 | 1560 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 840 | 1230 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 886 | 1080 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 1044 | 830 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Usage Method
| Roller Followers Intended Use | Noise Proof Transmission | |
| FEATURES | Nylon Coated Type | Urethane Coated Type |
| Product Description |  |  |
| Type with resin press-fit into cam follower. Resin absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | Type with urethane sintered on cam follower. Urethane absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | |
Roller Followers Example of Use
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
| dh7 | Maximum tightening torque N·m |
| 3 | 0.392 |
| 4 | 0.98 |
| 5 | 1.96 |
| 6 | 2.94 |
| 8 | 7.84 |
| 10 | 16.7 |
| 12 | 29.4 |
| 16 | 70.6 |
| 18 | 98 |
| 20 | 137 |
| 24 | 245 |
Roller Followers Precautions
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
| Roller Followers Type | dh7 Tolerance | D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUCS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 504 | 1960 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 555 | 1760 | |
| 26 | 10×1.0 | 592 | 1560 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 840 | 1230 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 886 | 1080 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 1044 | 830 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Dimensional Drawing
| Roller Followers Type | Material | Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUCS | Nylon | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
Operating environment at ambient temperature below 80 ℃.No grease replenishing hole is provided for d16 and below.
 Type |  dh7 Tolerance |  D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUCS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 504 | 1960 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 555 | 1760 | |
| 26 | 10×1.0 | 592 | 1560 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 840 | 1230 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 886 | 1080 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 1044 | 830 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Dimensional Drawing
| Type |  Material |  Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUCS | Nylon | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
Operating environment at ambient temperature below 80 ℃.No grease replenishing hole is provided for d16 and below.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| C-CFFRUCS5-13 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | Width B (mm) | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | L Dimension (mm) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 76.32 | 1 Piece(s) | Available | 1 Day(s) | 13 | 9 | Hex Socket on Head | 2510 | 254 | 23 | 5×0.8 |
Loading...
Basic Information
| Product Category | Cam Followers | Roller Type | Cylindrical Outer Ring | Cam Follower Type | Plastic |
|---|---|---|---|---|---|
| Size Standards | Metric System | Shaft | Provided | Roller Guiding Method | With Retainer |
| Seal | Provided | Application | Rolling Transmission Shock Absorber | Cam Follower Type | Flat Type |
Please check the type/dimensions/specifications of the part C-CFFRUCS5-13 in the Nylon Coated Cam Followers series.
Specification/Dimensions
-
type
- C-CFFRUCS
-
Outer Dia. D(Ø)
-
Width B(mm)
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head Thread
-
-
Allowable Rotational Speed(rpm)
-
Allowable Load(N)
-
L Dimension(mm)
-
Stud Screw Nominal Thread (M)(mm)
- 3×0.5
- 4×0.7
- 5×0.8
- 6×1.0
- 8×1.25
- 10×1.0
- 12×1.5
- 16×1.5
- 18×1.5
- 20×1.5
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Mounting Method
- Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
- Question: Applicable load of cam follower
- Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
- Question: Usage difference of different O.D. shapes of outer ring
- Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Products like this...
| Part Number |
|---|
| C-CFFRUCS12-30 |
| C-CFFRUCS12-32 |
| C-CFFRUCS16-35 |
| C-CFFRUCS18-40 |
| C-CFFRUCS6-16 |
| C-CFFRUCS8-19 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | Width B (mm) | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | L Dimension (mm) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 83.84 | 1 Piece(s) | Available | 1 Day(s) | 30 | 14 | Hex Socket on Head Thread | 1390 | 455 | 40 | 12×1.5 | |
MYR 90.16 | 1 Piece(s) | Available | 10 Day(s) | 32 | 14 | Hex Socket on Head Thread | 1320 | 487 | 40 | 12×1.5 | |
MYR 107.65 | 1 Piece(s) | Available | 1 Day(s) | 35 | 18 | Hex Socket on Head Thread | 1230 | 525 | 52 | 16×1.5 | |
MYR 118.45 | 1 Piece(s) | Available | 1 Day(s) | 40 | 20 | Hex Socket on Head Thread | 1080 | 554 | 58 | 18×1.5 | |
MYR 73.50 | 1 Piece(s) | Available | 1 Day(s) | 16 | 11 | Hex Socket on Head | 2230 | 288 | 28 | 6×1.0 | |
MYR 72.59 | 1 Piece(s) | Available | 1 Day(s) | 19 | 11 | Hex Socket on Head | 1960 | 315 | 32 | 8×1.25 |
Additional Products in this Category
- Resin Cam Followers-Retaining Rign/Hexagon Socket Head/Hexagon Socket Head Screw
- Cam Followers-With Female Thread Hole for Grease Fitting/Crowned Type
- Brackets for Cam Followers-Block
- Cam FollowerCF Type
- Roller Follower NAST Model (Separable Type)
- Roller Follower Model RNAST (Separate Type, No Inner Ring)
- Standard Cam Follower
- Cam Follower Stud Type Track Roller KR Model
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy