(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Aluminum Hinges Ultra Low Head Bolt Hole Type (C-HHCSNT8)
- Volume Discount
Part Number
Configured Part Number is shown.
C-HHCSNT8
Product Overview of Hinges
Economy series aluminum butterfly Hinges Ultra low head bolt type
aluminum butterfly Hinges with smooth appearance due to use of ultra-low head bolt
Usage Method of Hinges
| Utilization Method of Hinges | Lengthwise Utilization | Lateral Utilization | |
| A=2XB | A≠2XB | - | |
 |  |  | |
| Allowable Load Calculation Formula | Allowable Load =W | Allowable Load =W(B/A)*2 | Allowable Load =W |
Specifications Overview of Hinges
| TYPE of Hinges |  Material |  Surface Treatment |
| C-HHCSNT | A6063-T5 Bushing: Polyacetal | Alumite Treatment |
Example Use of Hinges
For details, refer to the following table for the applicable Hinges model.
Common combinations of aluminum profiles can be confirmed and found from the table below.
| Representative Dimensional Drawing of Hinges | Type of Matching Profile | Suitable Profile | * Allowable Load | Product Model | Surface Treatment | Mounting Pitch S mm | |
| KG | N | ||||||
 | Profile of the Same Size on Two Sides | Link 20/20 Profile | 8 | 78 | C-HHFL5 | Clear Anodized | 21 |
| C-HHBFL5 | Black Anodized | ||||||
| 10 | 98 | HHPSN5 | Clear Anodized | ||||
| HHPBSN5 | Black Anodized | ||||||
| 20 | 196 | C-HHDL5 | Clear Anodized | ||||
| C-HHBDL5 | Black Anodized | ||||||
| Link 30/30 Profile | 8 | 78 | C-HHFL6 | Clear Anodized | 32 | ||
| C-HHBFL6 | Black Anodized | ||||||
| 10 | 98 | HHPSN6 | Clear Anodized | ||||
| HHPBSN6 | Black Anodized | ||||||
| 20 | 196 | C-HHDL6 | Clear Anodized | ||||
| C-HHBDL6 | Black Anodized | ||||||
| Link 40/40 Profile | 8 | 78 | C-HHFL8 | Clear Anodized | 42 | ||
| C-HHBFL8 | Black Anodized | ||||||
| 10 | 98 | HHPSN8 | Clear Anodized | ||||
| HHPBSN8 | Black Anodized | ||||||
| 20 | 196 | C-HHDL8 | Clear Anodized | ||||
| C-HHBDL8 | Black Anodized | ||||||
| Link 45/45 Profile | 12 | 118 | C-HHFL8-45 | Clear Anodized | 47 | ||
| C-HHBFL8-45 | Black Anodized | ||||||
| 15 | 147 | HHPSN8-45 | Clear Anodized | ||||
| HHPBSN8-45 | Black Anodized | ||||||
| 30 | 294 | C-HHDL8-45 | Clear Anodized | ||||
| C-HHBDL8-45 | Black Anodized | ||||||
Profile with Different Sizes on Two Sides | Link 20/30 Profile | 8 | 78 | C-HHFLS6-5 | Clear Anodized | 26.5 | |
| 10 | 98 | HHPSF6-5 | |||||
| 20 | 196 | C-HHDLS6-5 | |||||
| Link 30/40 Profile | 8 | 78 | C-HHFLS8-5 | 31.5 | |||
| 10 | 98 | HHPSF8-5 | |||||
| 20 | 196 | C-HHDLS8-5 | |||||
| Link 20/45 Profile | 8 | 78 | C-HHFLS845-5 | 34 | |||
| 10 | 98 | HHPSF845-5 | |||||
| 20 | 196 | C-HHDLS845-5 | |||||
| Link 20/40 Profile | 12 | 118 | C-HHFLS8-6 | 37 | |||
| 15 | 147 | HHPSF8-6 | |||||
| 30 | 294 | C-HHDLS8-6 | |||||
| Link 30/45 Profile | 12 | 118 | C-HHFLS845-6 | 39 | |||
| 15 | 147 | HHPSF845-6 | |||||
| 30 | 294 | C-HHDLS845-6 | |||||
Precautions of Hinges
Product Feature of Hinges
Dimensional Drawing of Hinges
Refer to the Specification Table below for detailed product dimensions
Specification Table of Hinges
| Part Number of Hinges | * Allowable Load | Weight g | L | W | K | P | J | S | d Through hole | D Countersunk hole | E | ||
| Type | No. | kg | N | ||||||||||
| C-HHCSNT | 5 | 8 | 78 | 24 | 47 | 35.4 | 11 | 25 | 7.2 | 21 | 5.5 | 11 | 5.5 |
| 6 | 30 | 48 | 8.5 | 30 | 8 | 32 | 6.5 | 11 | 6 | ||||
| 8 | 50 | 63 | 62 | 13 | 37 | 10 | 42 | ||||||
Refer to the Specification Table below for detailed product dimensions
Specification Table
| Part Number | * Allowable Load | Weight g | L | W | K | P | J | S | d Through hole | D Countersunk hole | E | ||
| Type | No. | kg | N | ||||||||||
| C-HHCSNT | 5 | 8 | 78 | 24 | 47 | 35.4 | 11 | 25 | 7.2 | 21 | 5.5 | 11 | 5.5 |
| 6 | 30 | 48 | 8.5 | 30 | 8 | 32 | 6.5 | 11 | 6 | ||||
| 8 | 50 | 63 | 62 | 13 | 37 | 10 | 42 | ||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Basic Information
| Number of Holes | 4 |
|---|
Please check the type/dimensions/specifications of the part C-HHCSNT8 in the Aluminum Hinges Ultra Low Head Bolt Hole Type series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the differences between standard-shaped and special-shaped hole products, and how to distinguish them in use?
- Answer: Standard-shaped products are those with the same opening sizes on the left and right pages, while the special-shaped hole is the structure with different opening sizes on the left and right pages, one large and one small. The purpose of the special-shaped hole structure is to flexibly use when connecting aluminum profiles of different sizes. For detailed description, refer to examples of use.
- Question: Are the nuts for butterfly hinge mentioned in the Precautions necessarily required?
- Answer: When installed on aluminum profiles, the recommended nuts are not necessarily required and separate small nuts can be used for fixing. However, the nuts are required as fixing parts for support when installed on panels, because generally panels are relatively thin and screws cannot be used for locking and fixing.
Products like this...
| Part Number |
|---|
| C-HHCSNT5 |
| C-HHCSNT6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Length (mm) | Width (W) (mm) | Mounting Pitch S (mm) |
|---|---|---|---|---|---|---|---|
MYR 9.60 | 1 Piece(s) | Available | 1 Day(s) | 47 | 35.4 | 21 | |
MYR 10.47 | 1 Piece(s) | Available | 1 Day(s) | 47 | 48 | 32 |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy