(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Leveling Mounts Anti-Vibration (C-CFJSN50-12-100)
- Volume Discount
- Economy series Leveling Mounts, Anti-Vibration.
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJSN and C-CFJSNS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Body Surface Treatment: Black plating for Q235 Carbon Steel.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 60, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
C-CFJSN50-12-100
Economy Anti-Vibration Mount
- High-quality Q235 carbon steel and stainless steel construction
- Anti-vibration rubber foot for enhanced stability
- Zinc plating for superior corrosion resistance
- Screw with various thread size options
- Ideal for heavy-duty machinery and equipment
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Adjuster Product Overview
An adjuster with high quality, cheap price and excellent cost performance
Adjuster Product Feature
No height adjustment knob.
【Material Table】
| Type | A Body | B Glue Part | |
 Material |  Surface Treatment | Material | |
| C-CFJSN | Q235 | Zinc Plating | Rubber |
| C-CFJSNS | Stainless Steel | - | Rubber |
Note: The below material information is for Vietnam only:
Adjuster Usage Method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
Example of Use Adjuster
Dimensional Adjuster Drawing
Adjuster Specification Table
| Part Number | L | D | d | ℓ1 | ℓ2 | E | B | Vertical Load （kN） | Weight (g) | ||
 Type |  M |  A | |||||||||
| C-CFJSN C-CFJSNS | 8 | 60 | 82.5 | 40 | 35.5 | 5.5 | 6.5 | 17 | 13 | 3.5 | 107 |
| 10 | 80 | 104 | 7 | 8 | 17 | 3.5 | 140 | ||||
| 12 | 80 | 105 | 50 | 45.5 | 8 | 10 | 17 | 19 | 4 | 214 | |
| 100 | 125 | 4 | 236 | ||||||||
| 16 | 80 | 107 | 60 | 55.5 | 10 | 13 | 17 | 24 | 4.5 | 367 | |
| 100 | 127 | 4.5 | 406 | ||||||||
| 150 | 177 | 4.5 | 485 | ||||||||
| 20 | 100 | 130 | 13 | 16 | 30 | 4.5 | 558 | ||||
| 120 | 150 | 4.5 | 607 | ||||||||
Note: Thread size follows standard GB5782-1986 with below tolerance, please refer:
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| C-CFJSN50-12-100 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Thread Material | Thread Surface Treatment | Body Material | Main Body Surface Treatment | Width D (mm) | Allowable Load (Details) (kN) | Screw Length A (mm) | Main Body Height E (mm) | Nominal of Thread M (mm) | Screw Rod Surface Treatment | Base Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 16.52 | 1 Piece(s) | Available | 6 Day(s) | [Steel] S45C | Galvanizing | [Stainless Steel] Stainless Steel | Black Plating | 50 | 4 | 100 | 125 | 12 | Zinc Plating | Electro Plated Black |
Loading...
Basic Information
| Type | Adjusting Bolt Type | Adjusting Bolt Shape Type | Rubber Foot Type | Height Adjusting Handle | Not Provided |
|---|---|---|---|---|---|
| Properties | Standard | Swivel Mechanism | Not Provided |
Please check the type/dimensions/specifications of the part C-CFJSN50-12-100 in the Leveling Mounts Anti-Vibration series.
Specification/Dimensions
-
type
- C-CFJSN
- C-CFJSNS
-
Thread Material
- Stainless Steel
- Steel
- Stainless Steel
-
Thread Surface Treatment
- Not Provided
- Galvanizing
-
Body Material
- Stainless Steel
- Steel
- Stainless Steel
-
Main Body Surface Treatment
- Not Provided
- Black Plating
-
Width D(mm)
-
Allowable Load (Details)(kN)
-
Screw Length A(mm)
-
Main Body Height E(mm)
-
Nominal of Thread M(mm)
-
Screw Rod Surface Treatment
- Natural Color
- Zinc Plating
-
Base Surface Treatment
- Electro Plated Black
- Electropolishing
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can the economy series adjuster, standard type with glue, be used on inclined ground?
- Answer: Please use the economy series adjuster, standard type with glue, on flat ground, and try not to use it on inclined ground, which will lead to deformation of the adjuster.
- Question: Does the economy series adjuster, standard type with glue, have a height adjustment knob?
- Answer: The economy series adjuster, standard type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.
Products like this...
| Part Number |
|---|
| C-CFJSN100-20-200 |
| C-CFJSN100-24-150 |
| C-CFJSN100-24-180 |
| C-CFJSN50-12-80 |
| C-CFJSN60-16-100 |
| C-CFJSN60-16-150 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Thread Material | Thread Surface Treatment | Body Material | Main Body Surface Treatment | Width D (mm) | Allowable Load (Details) (kN) | Screw Length A (mm) | Main Body Height E (mm) | Nominal of Thread M (mm) | Screw Rod Surface Treatment | Base Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 39.42 | 4 Piece(s) | Available | 10 Day(s) | [Steel] Steel | Galvanizing | [Steel] Steel | Black Plating | 100 | 4.5 | 200 | 232 | 20 | Zinc Plating | Electro Plated Black | |
MYR 44.60 | 4 Piece(s) | Available | 10 Day(s) | [Steel] Steel | Galvanizing | [Steel] Steel | Black Plating | 100 | 5 | 150 | 184 | 24 | Zinc Plating | Electro Plated Black | |
MYR 47.86 | 4 Piece(s) | Available | 10 Day(s) | [Steel] Steel | Galvanizing | [Steel] Steel | Black Plating | 100 | 5 | 180 | 214 | 24 | Zinc Plating | Electro Plated Black | |
MYR 16.12 | 1 Piece(s) | Available | 6 Day(s) | [Steel] S45C | Galvanizing | [Stainless Steel] Stainless Steel | Black Plating | 50 | 4 | 80 | 105 | 12 | Zinc Plating | Electro Plated Black | |
MYR 20.76 | 1 Piece(s) | Available | 6 Day(s) | [Steel] S45C | Galvanizing | [Stainless Steel] Stainless Steel | Black Plating | 60 | 4.5 | 100 | 127 | 16 | Zinc Plating | Electro Plated Black | |
MYR 21.80 | 1 Piece(s) | Available | 6 Day(s) | [Steel] S45C | Galvanizing | [Stainless Steel] Stainless Steel | Black Plating | 60 | 4.5 | 150 | 177 | 16 | Zinc Plating | Electro Plated Black |
Additional Products in this Category
- Adjustment Pads/Space Saving Type
- Leveling Mounts - Rubber Type
- Anti-Vibration Wedge Mount PKDK (Bolt Through Type with A Spherical Surface)
- Standard Receiver Adjuster, Space Saving Type D-B50/D-A60/D-A65
- Level Adjuster KC-275-A
- Ono Rubber, Anti-Vibration Leg Pedestal All-Leg Level Adjuster, Left-Right Vibration Proof
- Adjuster With Felt
- Non-Slip Adjuster - JAP Type
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy