(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Proximity Sensor, Long Detection Range, Shielded, Bend Tolerance, Oil Resistant Cable
- Volume Discount
Proximity Sensor, Long Detection Range, Shielded, Bend Tolerance, Oil Resistant Cable
These Proximity Sensors are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Cylindrical Shape with Screw and Shield
● Detection Head Size Dimension : M8x1.0 and M12X1.0
● Detection Distance (mm.): 2 and 4
● Output Method : NPN (Normally Open) and PNP (Normally Open)
● Wire Length (m.): 2
[Application]
It is an important component in the automation system ,its primary function is to detect objects without requiring any physical contact.
Part Number
Configured Part Number is shown.
Economy Proximity Sensor
- Detection Distance: Available in multiple sizes. Perfect for applications requiring reliable object detection over various distances.
- Multiple output pattern options available.
- Cable Type: Oil resistant, specific length provided.
- Switching Frequency: Up to 2kHz for M8 models and 1kHz for M12 models.
- Operating Temperature Range: -25‹C to +70‹C. Maintains stable performance across a wide temperature range.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
Proximity Sensors, Proximity switches are a type of position switch designed for operation without direct mechanical contact with moving parts. When an object approaches the sensing surface and reaches the operation distance, the switch can work without any mechanical contact or pressure applied, thus driving the DC electrical appliance or providing control commands to the computer (plc). Proximity switches are switch-type sensors (i.e. contactless switches) that incorporate the features of travel switches and microswitches, and provide the sensing capability. They boast reliable operation, stable performance, fast frequency response, long service life, strong anti-interference capability, waterproofness, anti-vibration, corrosion resistance, etc.
| Model | MISUMI Standard Product EMZ3-12S | Economy Series | |
| C-2C08 | C-2C12 | ||
| Shape | Thread Type M12 | Thread Type M8 | Thread Type M12 |
| Detection Distance | 3mm | 2mm | 4mm |
| Output Format | NPN N.O. | NPN N.O. / PNP N.O. | |
| Sensor Part Dimensions | M12×47 | M8×30 | M12×35 |
| Power Supply | DC 3-wire | DC 3-wire | |
| Rated Operating Voltage | 12/24VDC (10 to 30VDC) Allowable ripple rate 10% p-p or below | 12/24VDC (10 to 30VDC) Allowable ripple rate 10% p-p or below | |
| Voltage Drop | 1.5V or less | 1.5V or less | 2.0V or less |
| Hysteresis | 20% or less | 15% or less | |
| Operating Ambient Temperature | -25 to +70°C | -25 to +70°C | |
| Temperature Characteristics | Within ±15% (for operation at +23°C) | Within ±10% (for operation at +25°C) | |
| Protection Rating | IP67 | IP67 | |
| Case Material | PBT | ABS | |
C-2C12-N01/P01
Specification Table
| Proximity Sensors Model (double shielded type) | Diameter | Wire Length | Detection Distance | Output Method | Operation Mode | Switching frequency | |||||||||||
| C-2C08-N01 | M8 | 2M | 2mm | NPN Output | NO | 2KHz | |||||||||||
| C-2C08-P01 | PNP Output | ||||||||||||||||
| C-2C12-N01 | M12 | 4mm | NPN Output | 1KHz | |||||||||||||
| C-2C12-P01 | PNP Output | ||||||||||||||||
| Proximity Sensors Types | Operation Mode (NO) | |||||||||||||
| Including Cable 2M | ||||||||||||||
| DC 3-Wire Type (NPN) | DC 3-Wire Type (PNP) | |||||||||||||
| Part Number | C-2C08-N01 | C-2C12-N01 | C-2C08-P01 | C-2C12-P01 | ||||||||||
| Detection Distance | 2mm | 4mm | 2mm | 4mm | ||||||||||
| Operating Voltage | 10~30VDC | |||||||||||||
| Allowable Pulse Voltage | <10% | |||||||||||||
| No-load current | <10mA | |||||||||||||
| Maximum load current | 200mA | |||||||||||||
| Leakage current | <0.01mA | |||||||||||||
| Voltage drop | <1.5V | <2.0V | ||||||||||||
| Switching frequency | 2KHZ | 1KHZ | ||||||||||||
| Response time | 0.1ms | 0.2ms | ||||||||||||
| Switching hysteresis | <15% (Sr) | |||||||||||||
| Repetitive Accuracy | <1.0% (Sr) | |||||||||||||
| Protection Rating | IP67 | |||||||||||||
| Operating Temperature | -25°C~+70°C | |||||||||||||
| Temperature drift | <10% (Sr) | |||||||||||||
| Short Circuit protection | YES | |||||||||||||
| Overcurrent | 220mA | |||||||||||||
| Detection Surface Material | ABS | |||||||||||||
Product Feature
ZD: Surge Absorbing Zener Diode
Tr: NPN Output Transistor
D: Diode for Power Supply Reverse Connection Protection
ZD: Surge Absorbing Zener Diode
Tr: PNP Output Transistor
D: Diode for Power Supply Reverse Connection Protection
Usage Method
The shielded type has the magnetic flux concentrated in the front of the sensor, with the range of the inductive magnetic field toward the front of the proximity switch.
The unshielded coil flux can increase the detection distance, but it is easy to be affected by surrounding metals because there is no object protection
Attention is required during installation
To prevent signal interference, the distance from the sensor surface to the metal detection object is ≥3 Sn (Sn is the sensor’s sensing distance), and the distance between two adjacent proximity sensors is ≥D (D is the sensor’s diameter).
No protection is provided around the induction coil, so the distance to be guaranteed between the sensing surface and the mounting surface shall be Y (M5~M8: Y=6 mm, M12: Y=9 mm).
The distance between the sensing surface and the metal detection object shall be ≥3 Sn, and the distance between two adjacent proximity sensors shall be ≥2D (D is the sensor’s diameter).
For face-to-face mounted sensors, the minimum distance between two sensing surfaces shall be ≥ 6 Sn.
Iron and steel X=0.2D
Other metal X=0.1D
*Thickness of detection object: 1 mm
| Dimension D | Y (MM) | ||||
| M8 | 12 | ||||
| M12 | 15 |
Precautions
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| C-2C08-N01 |
| C-2C08-P01 |
| C-2C12-N01 |
| C-2C12-P01 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detection Head Size Dimension (mm) | Detection Distance L1 (mm) | Output Pattern |
|---|---|---|---|---|---|---|---|
MYR 61.42 | 1 Piece(s) | Available | 1 Day(s) | M8X1.0 | 2 | NPN (Normally Open) | |
MYR 61.42 | 1 Piece(s) | Available | 1 Day(s) | M8X1.0 | 2 | PNP (Normally Open) | |
MYR 59.40 | 1 Piece(s) | Available | 1 Day(s) | M12X1.0 | 4 | NPN (Normally Open) | |
MYR 59.40 | 1 Piece(s) | Available | 12 Day(s) | M12X1.0 | 4 | PNP (Normally Open) |
Loading...
Basic Information
| Shape | Screw | Detected Object | Magnetic Metal | Shield | Shield |
|---|---|---|---|---|---|
| Amplifier | Built-in Type | Protection Structure (IEC) | IP67 | Power Supply and Output Specifications | 3-wire type |
| External Shape | Cylindrical Shape |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: How long is the detection distance of the proximity sensor
- Answer: The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.
- Question: What needs to be paid attention to in the sensor selection?
- Answer: In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.
- Question: What is the meaning of shielded and non-shielded for proximity sensors?
- Answer: The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy