(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Linear Guides Wide Blocks-Low Profile
- Volume Discount
MiSUMi Economy
Linear Guides Wide Blocks-Low Profile
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33 and 42
● Block Type : Wide Block Low Profile
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
(i)Caution
- Please expect longer LT for length exceeding 2.8m or alteration is ZA or ZB.
- Please note the model no. C-ELGW20 in CAD file the correct B size is 49mm instead of 48.1.
Part Number
Configured Part Number is shown.
Economy Wide Block Low Profile Linear Guide
CNC Machines Durability Cost-effective
- Rail lengths available in a wide range
- Various assembly heights available
- Suitable for CNC machines and 3D printers
- High load capacity with low friction
- Economical pricing for budget-conscious buyers
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
Linear Guides, also known as slide rail or linear slide, which is used for linear reciprocating motion, has higher rated load and linear motion precision than linear bearings under the same moving component volume. Also, it bears a certain torque load, achieving high-precision linear motion under high load.Used to support and guide moving parts, Linear Guides make reciprocating linear motion in a specified direction. It is mainly used in mechanical structures with high precision requirements. Rolling steel balls are used instead of intermediate medium between the moving element and the fixed element of the linear guide rail.
Dimensional Drawing
Operating Temperature: -20 to 80°CSince this product of Linear Guides has no surface treatment, please be sure to take anti-rust measures.The dimensional tolerance of Length L is ±2 mm.The kit includes 1 block. For additional blocks, please purchase a single block model.Specifications Overview
 Material Hardness | Block Linear Guides Type | Nominal Model | Optional length L (mm) | Optional Height H (mm) |
| Carbon Steel 58HRC～ | Flanged Type | 15,20,25,30 | 100 to 1960 | 24,28,33,42 |
Optional heights and lengths are the overall range of this series. Refer to the Specification Table for details.Specification Table
■ L Dimension Configurable Type| Nominal Model | L (Specified Length) | Unit Dimensions (mm) | Block Dimension (mm) | Guide Dimension (mm) | Guide Fixing Bolt Dimension (mm) | |||||||||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L2 | K1 | K2 | G | M | T | H2 | H3 | WR | HR | D | h | d | P | E | ||||
| Flanged Type | 15 | 160 to 1960 | 24 | 4.5 | 18.5 | 52 | 41 | 5.5 | 26 | 39.8 | 56.8 | 10.15 | 3.5 | 5.7 | M5 | 5 | 5.5 | 6 | 15 | 12.5 | 7.5 | 5.3 | 4.5 | 60 | Please refer to the calculation table below | M4×16 |
| 20 | 160 to 1960 | 28 | 6 | 19.5 | 59 | 49 | 5 | 32 | 48.1 | 69.1 | 12.3 | 4.15 | 12 | M6 | 7 | 6 | 6 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | M5×16 | ||
| 25 | 160 to 1960 | 33 | 7 | 25 | 73 | 60 | 6.5 | 35 | 59 | 82.6 | 16.15 | 4.55 | 12 | M8 | 7.5 | 8 | 8 | 23 | 18 | 11 | 9 | 7 | 60 | M6×20 | ||
| 30 | 200 to 1960 | 42 | 10 | 31 | 90 | 72 | 9 | 40 | 70.1 | 98.1 | 21.05 | 6 | 12 | M10 | 7 | 8 | 9 | 28 | 23 | 14 | 9 | 9 | 80 | M8×25 | ||
The kit includes 1 block. For additional blocks, please purchase a single block model.The reference surface is set on the side of the block and slide rail with the linear groove. When used, make sure to align the two reference surfaces with each other.The running parallelism is the value after the slide rail is fixed. (It is not the value before the screws of the slide rail are tightened.)Since this product has no surface treatment, please be sure to take anti-rust measures.Dimension E of length specified type needs to be calculated. Please refer to "detailed dimension of Dimension L specified type" for calculation method■ Allowable Load
| Nominal Model | Basic Rated Load | Static Allowable Moment | Mass | |||
| C (Dynamic) kN | Co (Static) kN | MA・MB kN-m | MC kN-m | Blocks kg | Guide Rails kg/m | |
| 15 | 7.83 | 16.19 | 0.1 | 0.13 | 0.21 | 1.25 |
| 20 | 10.31 | 21.13 | 0.16 | 0.22 | 0.32 | 2.08 |
| 25 | 16.27 | 32.4 | 0.32 | 0.38 | 0.59 | 2.67 |
| 30 | 23.7 | 47.46 | 0.55 | 0.68 | 1.04 | 4.35 |
■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below
| H | 24 | 28 | 33 | 42 | Number of Mounting Holes M |
| L | 100~131 | 100 to 139 | 100 to 141 | - | 2 |
| 132~191 | 140 to 199 | 142 to 201 | 200 to 279 | 3 | |
| 192 to 251 | 200 to 259 | 202 to 261 | 280 to 343 | 4 | |
| 252 to 311 | 260 to 319 | 262 to 321 | 344 to 423 | 5 | |
| 312 to 371 | 320 to 379 | 322 to 381 | 424 to 503 | 6 | |
| 372 to 431 | 380 to 439 | 382 to 441 | 504 to 583 | 7 | |
| 432 to 491 | 440 to 499 | 442 to 501 | 584 to 663 | 8 | |
| 492 to 551 | 500 to 559 | 502 to 561 | 664 to 743 | 9 | |
| 552 to 611 | 560 to 619 | 562 to 621 | 744 to 823 | 10 | |
| 612 to 671 | 620 to 679 | 622 to 681 | 824 to 903 | 11 | |
| 672 to 731 | 680 to 739 | 682 to 741 | 904 to 983 | 12 | |
| 732 to 791 | 740 to 799 | 742 to 801 | 984 to 1063 | 13 | |
| 792 to 851 | 800 to 859 | 802 to 861 | 1064 to 1143 | 14 | |
| 852 to 911 | 860 to 919 | 862 to 921 | 1144 to 1223 | 15 | |
| 912 to 971 | 920 to 979 | 922 to 981 | 1224 to 1303 | 16 | |
| 972 to 1031 | 980 to 1039 | 982 to 1041 | 1304 to 1383 | 17 | |
| 1032 to 1091 | 1040 to 1099 | 1042 to 1101 | 1384 to 1463 | 18 | |
| 1092 to 1151 | 1100 to 1159 | 1102 to 1161 | 1464 to 1543 | 19 | |
| 1152 to 1211 | 1160 to 1219 | 1162 to 1221 | 1544 to 1623 | 20 | |
| 1212 to 1271 | 1220 to 1279 | 1222 to 1281 | 1624 to 1703 | 21 | |
| 1272 to 1331 | 1280 to 1339 | 1282 to 1341 | 1704 to 1783 | 22 | |
| 1332 to 1391 | 1340 to 1399 | 1342 to 1401 | 1784 to 1863 | 23 | |
| 1392 to 1451 | 1400 to 1459 | 1402 to 1461 | 1864 to 1943 | 24 | |
| 1452 to 1511 | 1460 to 1519 | 1462 to 1521 | 1944 to 1959 | 25 | |
| 1512 to 1571 | 1520 to 1579 | 1522 to 1581 | - | 26 | |
| 1572 to 1631 | 1580 to 1639 | 1582 to 1641 | - | 27 | |
| 1632 to 1691 | 1640 to 1699 | 1642 to 1701 | - | 28 | |
| 1692 to 1751 | 1700 to 1759 | 1702 to 1761 | - | 29 | |
| 1752 to 1811 | 1760 to 1819 | 1762 to 1821 | - | 30 | |
| 1812 to 1871 | 1820 to 1879 | 1822 to 1881 | - | 31 | |
| 1872 to 1931 | 1880 to 1939 | 1882 to 1941 | - | 32 | |
| 1932 to 1960 | 1940 to 1960 | 1942 to 1960 | - | 33 | |
| P | 60 | 80 | |||
Alterations
| Alterations |  Code | Spec. |
| 2 Block Specification | B2 | 1 block added to 1-block product to ship as 2 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. |
| 3 Block Specification | B3 | 2 blocks added to 1-block product to ship as 3 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. |
| 4 Block Specification | B4 | 3 blocks added to 1-block product to ship as 4 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. |
| Preload adjustment | ZA Light Preload | Change “No Preload Prodcut” -> “Light Preload Product” or “Medium Preload Product” |
| ZB Medium Preload | ||
| Rail Ends Cut | ES Left End Cut |  ES & EB will be the distance from the edge to the center of the left-hand hole and the right-hand hole respectively. Only either ES or EB can be selected. When ES or EB is indicated, the distance from the edge to the center of the opposite side will be changed but the total rail length will remain unchanged. |
| EB Right End Cut |
Precision Benchmark
●Dimensional Precision
●Running Parallelism
Unit: mm
| Dimensional Precision Type | Precision Standard | 15.20 | 25.30 |
| High・Low Linear Guides | Height H Tolerance | ±0.1 | ±0.1 |
| Height H Pair Variation | ±0.1 | ±0.1 | |
| Width N Tolerance | 0.02 | 0.02 | |
| Width N Pair Variation | 0.02 | 0.03 |
●Running Parallelism
| Rail Length (mm) | Accuracy grade (μm) |
| 100-200 | 14 |
| 200-300 | 15 |
| 300-500 | 17 |
| 500-700 | 20 |
| 700-900 | 22 |
| 900-1100 | 24 |
| 1100-1500 | 26 |
| 1500-1900 | 28 |
| 1900-2500 | 31 |
Product Features
Feature of Linear Guides 1: Standard rails are equipped with dust covers to prevent dirt from accumulating in the mounting holes when the equipment is in use.Feature of Linear Guides 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature of Linear Guides 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve device positioning.
Feature of Linear Guides 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature of Linear Guides 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Example of Use
Mechanism name: Belt-driven handling device
Feature of Linear Guides 1: Suitable for medium precision and medium frequency driving and positioning.
Feature of Linear Guides 2: A linear guide is configured in the center to achieve miniaturization.
For details, click
here
Feature of Linear Guides 1: Suitable for medium precision and medium frequency driving and positioning.
Feature of Linear Guides 2: A linear guide is configured in the center to achieve miniaturization.
For details, click
hereSelection Calculation
The service life of linear guide is divided into 3 categories as follows:
① Operating distance life
here.
① MISUMI's Linear Guides is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the Linear Guides ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the Linear Guides, so please add grease at the right time according to the service conditions.
MISUMI's Linear Guides are sealed with the greases at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
① Operating distance life
When the linear guide makes the linear reciprocating motion under load, the repeated stress is often applied to the rolling element (steel ball) or rolling surface (slide rail), resulting in scale-like damage, which is called fatigue stripping of material. The total moving distance before the initial stripping is called the service life of linear guide.
② Rated lifeThe rated life refers to the total travel distance reached by a group of linear guides moving under the same conditions, with 90% not stripping. The rated life can be calculated with the following formula based on the basic dynamic rated load and the load applied on the linear guide.
The load shall be calculated before using a linear guide. It is not easy to calculate the load during the linear reciprocating motion, because there may be vibration or impact during the motion, requiring a full consideration to the distribution of vibration or impact relative to the linear guide. Operating temperature and other factors also have great influence on the service life. Taking all these conditions into account, the above calculation formula is changed into the following one.
③ Operating time life
The load shall be calculated before using a linear guide. It is not easy to calculate the load during the linear reciprocating motion, because there may be vibration or impact during the motion, requiring a full consideration to the distribution of vibration or impact relative to the linear guide. Operating temperature and other factors also have great influence on the service life. Taking all these conditions into account, the above calculation formula is changed into the following one.
The service life can be calculated by obtaining the travel distance per unit time. When the length of the stroke and the number of strokes are determined, it can be calculated according to the following formula.
For the specific service life and load calculation methods, please click 
here.Usage Method
■ About use of Linear Guides① MISUMI's Linear Guides is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the Linear Guides ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the Linear Guides, so please add grease at the right time according to the service conditions.
MISUMI's Linear Guides are sealed with the greases at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually, perform the grease filling maintenance once every 3 months.
The specific maintenance time shall be adjusted according to the actual situation. It is recommended to check the grease condition once every 100 km.
* The above is the grease filling interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
The specific maintenance time shall be adjusted according to the actual situation. It is recommended to check the grease condition once every 100 km.
* The above is the grease filling interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Precautions
For normal use, the installation of the Linear Guides needs to meet the following four points:
① Whether the shape of the mounting surface produces of Linear Guides interference
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard of Linear Guides
installation method of Linear Guides Clickhere for the detailed installation method
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard of Linear Guides
installation method of Linear Guides Click
here for the detailed installation methodApplication Industries
| Medical | Smart phone | |
 |  | |
| Robotics | Electronic & Electrical Appliances | |
 |  |
Related Products
| Miniature linear guide Standard light preloading type | Miniature linear guide Wide slide rail type | Heavy Load linear guide | ||
 |  |  | ||
| Typical Linear Guides model: SSEB10-55 | Typical Linear Guides model: SSEBW12-200 | Typical Linear Guides model: SXR24-280 |
Related Documents
For the installation and use of Linear Guides, please refer to here
herePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-ELGWB15 |
| C-ELGWB20 |
| C-ELGWB25 |
| C-ELGWB30 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Rail Length L (mm) | Assembly Height H (mm) | Nominal Part Number | Set / Single Item | Lubrication Type | L Dimension Type | Applicable Linear Guide | Rail Material (Surface Treatment) | Rail Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 56.60 | 1 Piece(s) | Available | 1 Day(s) | - | 24 | 15 | Block Only | - | - | C-ELGW15 | - | - | |
MYR 58.62 | 1 Piece(s) | Available | 1 Day(s) | - | 28 | 20 | Block Only | - | - | C-ELGW20 | - | - | |
MYR 78.84 | 1 Piece(s) | Available | 10 Day(s) | - | 33 | 25 | Block Only | - | - | C-ELGW25 | - | - | |
MYR 114.98 | 1 Piece(s) | Available | 1 Day(s) | - | 42 | 30 | Block Only | - | - | C-ELGW30 | - | - |
Loading...
Basic Information
| Block Type | Wide Block | Rail Type | Standard Rail | Preload | Normal Clearance |
|---|---|---|---|---|---|
| Accuracy Standards | Standard Grade | Material | Carbon Steel | Ball Arrangement | Medium, Heavy Load Type |
| No. of Blocks | 1 | Retainer | N/A | Lubrication Type | Lubrication Applied |
| Rolling Element | Ball | Block Material (Surface Treatment) | Carbon Steel |
Specification/Dimensions
-
Rail Length L(mm)
-
Assembly Height H(mm)
-
Nominal Part Number
-
Lubrication Type
- Lithium Grease Filled
-
L Dimension Type
- Specified Type
-
Applicable Linear Guide
-
Rail Material (Surface Treatment)
- Carbon Steel
-
Rail Surface Treatment
- none
-
Set / Single Item
- Set
- Block Only
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 10 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can linear guides or sliders be purchased separately?
- Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
- Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
- Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
- Question: What problems should be paid attention to when the linear guide is installed vertically?
- Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
- Question: Can the rail or slider be repaired if it is damaged?
- Answer: Repair service is not provided, re-purchase is recommended.
- Question: Can the corresponding MISUMI linear guide products be selected according to the third-party guide rail model?
- Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
- Question: Can linear guide length be arbitrarily specified?
- Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.
Additional Products in this Category
- Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload
- Miniature Linear Guides - Wide Rails - Standard Blocks with Dowel Holes, Light Preload
- Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance
- Miniature Linear Guides Short Blocks
- [Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type
- [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type
- [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
- Linear Way L LWL (F) Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy