(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Round Flanged Linear Bushings With Pilot, Single / Double (E-LBFP25UU)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
Part Number
Configured Part Number is shown.
E-LBFP25UU
Economy Round Flanged Linear Bushing with Pilot
- Space-saving round flanged design for compact mechanisms.
- Supports a range of shaft diameters
- Effective utilization of space, suitable for small mechanism designs.
- High efficiency with low friction resistance.
- More cost-effective than standard linear guides.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview of Linear Bushings
The embedded flanged linear bearing does not extend to the opposite side of the mounting surface, so there is sufficient space on the opposite side of the mounting surface.
Product Features of Linear Bushings
Linear Bushings Feature 1: Effective utilization of space. The combination of the guide shaft and the linear bearing enables effective use of space, suitable for small mechanism designs.
Linear Bushings Feature 2: Selection can be made based on operating environment. The outer cylinder of the linear bearing is made of steel or stainless steel, and the retainer is made of stainless steel for harsh conditions or resin for low noise.
Linear Bushings Feature 3: Good interchangeability. Linear bearings have good interchangeability because they can be used with shafts randomly.
Linear Bushings Feature 4: Appropriate specifications can be selected according to the conditions of use.
Linear Bushings Feature 5: More cost effective than the linear guide.
Dimensional Drawing of Linear Bushings
When this product of Linear Bushings is initially delivered, its color may be partially inconsistent with the photo, in which case the actual product shall prevail, without prior notice.Specifications Overview of Linear Bushings
| Housing | Ball | Retainer | Operating Environment Temperature |  Accessories | ||
 Material |  Hardness |  Surface Treatment | Material | Material | ||
| Equivalent to SUJ2 | 58HRC～ | No Surface Treatment Electroless Nickel Plating | Equivalent to SUJ2 | Resin | -20 to 80℃ | Seal packing Material Nitrile Rubber (-20 to 120℃) |
Linear Bushings If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.Usage Method of Linear Bushings
| Product Drawings of Linear Bushings | Instructions for use Linear Bushings | ||||||||
 | When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type. | ||||||||
 | Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use. | ||||||||
 | Linear bearing is not suitable for repeated plugging and unplugging. | ||||||||
 | When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed. | ||||||||
Precautions of Linear Bushings
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
for details. ③ Recommended grease filling interval: Usually every 6 months.
④When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
⑤ When the linear bearing is subjected to large moment load (eccentric load), one piece of single liner type is not applicable, so it is recommended to use one piece of double liner type or multiple pieces of single liner type.
■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.
■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.
■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.
Related Documents of Linear Bushings
Usage Method of Linear Bushings.For anti-rust performance and maintenance of metal materials and their surface treatment, please refer to
Anti-rust Performance.Application Industries of Linear Bushings
| Electronic & Electrical Appliances | Automotive | Lithium battery | ||
 |  |  | ||
| LCD | Smart phone | Semiconductor | ||
 |  |  |
Related Products of Linear Bushings
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-LBFP25UU |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Inscribed Circle Dia. dr (Ø) | Overall Length L (mm) | Outer Cylinder Surface Treatment | Outer Dia. D (Ø) | Ball Recirculating Type | Length | Eccentricity (µm) | Basic Load Rating: Dynamic Load (Details) (N) | Basic Load Rating: Static Load (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 30.10 | 1 Piece(s) | Available | 1 Day(s) | 25 | 59 | No Surface Treatment | 40 | Single | Single | 0.03 | 980 | 1570 |
Loading...
When this product is initially delivered, its color may be partially inconsistent with the photo, in which case the actual product shall prevail, without prior notice.| Housing | Ball | Retainer | Operating Environment Temperature |  Accessories | ||
 Material |  Hardness |  Surface Treatment | Material | Material | ||
| Equivalent to SUJ2 | 58HRC～ | No Surface Treatment Electroless Nickel Plating | Equivalent to SUJ2 | Resin | -20 to 80℃ | Seal packing Material Nitrile Rubber (-20 to 120℃) |
■Dimension Specification Table
| I.D. | dr | O.D. D | Tolerance | L | ℓ | H | T | d | d1 | t | P.C.D. | Lateral misalignment | Number of ball rows | Verticality | Basic Rated Load C (Dynamic) N | Basic Rated Load Co (Static) N | Allowable Static Moment (N・m) | Round Flanged Mass (g) | |||||||||
| Single Type Tolerance | Double Type Tolerance | No Surface Treatment | With Surface Treatment | Single Type | Double Type | Tolerance | Single Type | Double Type | Single Type | Double Type | Single Type | Double Type | Single Type | Double Type | Single Type | Double Type | |||||||||||
| 6 | 0 -0.009 | 0 -0.01 | 12 | 0 -0.025 | 0 -0.020 | 19 | 35 | ±0.3 | 5 | 28 | 5 | 3.5 | 6 | 3.1 | 20 | 0.024 | 0.030 | 4 | 0.035 | 0.04 | 206 | 324 | 265 | 529 | 2.18 | 24 | 31 |
| 8 | 15 | 24 | 45 | 32 | 24 | 265 | 431 | 380 | 784 | 4.31 | 37 | 51 | |||||||||||||||
| 10 | 19 | 29 | 55 | 6 | 40 | 6 | 4.5 | 7.5 | 4.1 | 29 | 372 | 588 | 549 | 1100 | 7.24 | 72 | 98 | ||||||||||
| 12 | 21 | 30 | 57 | 42 | 32 | 412 | 657 | 598 | 1200 | 10.9 | 76 | 110 | |||||||||||||||
| 16 | 28 | 37 | 70 | 48 | 38 | 5 | 775 | 1230 | 1180 | 2350 | 19.7 | 120 | 190 | ||||||||||||||
| 20 | 0 -0.01 | 0 -0.012 | 32 | 0 -0.035 | 0 -0.030 | 42 | 80 | 8 | 54 | 8 | 5.5 | 9 | 5.1 | 43 | 0.030 | 0.040 | 882 | 1400 | 1370 | 2740 | 26.8 | 180 | 260 | ||||
| 25 | 40 | 59 | 112 | 62 | 51 | 6 | 980 | 1560 | 1570 | 3140 | 43.4 | 340 | 540 | ||||||||||||||
| 30 | 45 | 64 | 123 | 10 | 74 | 10 | 6.6 | 11 | 6.1 | 60 | 1570 | 2490 | 2740 | 5490 | 82.8 | 470 | 680 | ||||||||||
| 35 | 0 -0.012 | 0 -0.015 | 52 | 70 | 135 | 82 | 67 | 0.040 | 0.050 | 0.045 | 0.05 | 1670 | 2650 | 3140 | 6270 | 110 | 650 | 1020 | |||||||||
| 40 | 60 | 80 | 151 | 13 | 96 | 13 | 9 | 14 | 8.1 | 78 | 2160 | 3430 | 4020 | 8040 | 147 | 1060 | 1570 | ||||||||||
* mark shows the verticality between Part D and the flange mounting surface.For information on the flanged height adjusting ring, please refer to the 
Adjusting Ring.Basic Information
| Type | Flange | Flange Type | Male-Female Joint Flanged | Style | Standard |
|---|---|---|---|---|---|
| Outer Cylinder Material | SUJ2 Equivalent | Lubrication Type | Not Provided | Accuracy | High Grade |
| Motion | Linear | Types | Pilot Flanged | Flange Shape | Round Flange |
| Ball Material | Equivalent to SUJ2 | Retainer Material | Resin | Seal | Provided |
| Greased Filled | Not Provided |
Please check the type/dimensions/specifications of the part E-LBFP25UU in the Round Flanged Linear Bushings With Pilot, Single / Double series.
Specification/Dimensions
-
Inscribed Circle Dia. dr(Ø)
-
Overall Length L(mm)
-
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Outer Dia. D(Ø)
-
Ball Recirculating Type
- Single
- Double
-
Length
- Single
- Double
-
Eccentricity(µm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: How is linear bearing maintained regularly?
- Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
- Question: Comparison of antirust ability of linear bearings?
-
Answer:
Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.
Products like this...
| Part Number |
|---|
| E-LBFP12UU |
| E-LBFP16LUU |
| E-LBFP16UU |
| E-LBFP30LUU |
| E-LBFP30UU |
| E-LBFP40LUU |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Inscribed Circle Dia. dr (Ø) | Overall Length L (mm) | Outer Cylinder Surface Treatment | Outer Dia. D (Ø) | Ball Recirculating Type | Length | Eccentricity (µm) | Basic Load Rating: Dynamic Load (Details) (N) | Basic Load Rating: Static Load (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 19.16 | 1 Piece(s) | Available | 13 Day(s) | 12 | 30 | No Surface Treatment | 21 | Single | Single | 0.024 | 412 | 598 | |
MYR 34.12 | 1 Piece(s) | Available | 13 Day(s) | 16 | 70 | No Surface Treatment | 28 | Double | Double | 0.03 | 1230 | 2350 | |
MYR 21.46 | 1 Piece(s) | Available | 13 Day(s) | 16 | 37 | No Surface Treatment | 28 | Single | Single | 0.024 | 775 | 1180 | |
MYR 64.86 | 1 Piece(s) | Available | 13 Day(s) | 30 | 123 | No Surface Treatment | 45 | Double | Double | 0.04 | 2490 | 5490 | |
MYR 34.58 | 1 Piece(s) | Available | 13 Day(s) | 30 | 64 | No Surface Treatment | 45 | Single | Single | 0.03 | 1570 | 2740 | |
MYR 108.88 | 1 Piece(s) | Available | 13 Day(s) | 40 | 151 | No Surface Treatment | 60 | Double | Double | 0.050 | 3430 | 8040 |
Additional Products in this Category
- Mini Flanged Linear Bushings - Square Flange
- Round Flanged Linear Bushings, Medium
- Compact Flanged Ball Bushings
- Linear Bushing - LM-L Type
- Guide Ball Bushing, LG Type
- Square Flange Type Linear Bushing [LKBMKUU]
- Flanged linear bushing housingLFWK shapedoublerectangular flangealuminum case
- Maintenance-freeflanged linear bushingsLFLKC-MF shapelongcenter positionround shape flange
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy