(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Shock Absorbers, Heavy Load Absorption Type
- Volume Discount
- Shock Absorbers, Heavy Load Absorption Type from MISUMI
- Good abrasion resistance by utilizing special oil seal.
- Enhance cushioning stability due to good surface finishing.
- The spring is made of German piano wire.
- Extend mechanical life, The service life of Shock Absorbers from MISUMI is up to 800,000 times.
- Max. Collision Velocity(m/s): 4.8 m/s
- Operating Environment Temperature: -5 to 70℃
- Significantly reduce noise and provide a quiet working environment.
- Improve the safety of mechanical running.
Part Number
Configured Part Number is shown.
Economy Heavy Load Absorption Shock Absorber
- High Energy Absorption Capacity: Designed for heavy loads, it effectively absorbs high-energy impacts due to its unique internal pressure cylinder combination structure.
- Adjustable Energy Absorption: Optimize shock absorption by rotating the adjuster for tailored performance.
- Improved Production Efficiency: Smoothly stops impact objects, allowing for higher operating speeds and increased production output.
- Extended Mechanical Life: Reduces impact and vibration, protecting machinery and extending its lifespan.
- Noise Reduction: Significantly decreases noise levels, creating a quieter working environment.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product of Shock Absorbers Overview
The economy series heavy load Shock Absorbers has a unique internal pressure cylinder combination structure, capable of absorbing high energy impact load.
Optimal energy absorption effect is achievable by rotating the adjuster.
The advantages of using Shock Absorbers:
1. Improve production efficiency: equipment can be operated at high frequency and high speed to improve production efficiency because the shock absorber can stop the impact object smoothly.
2. Extend mechanical life: the buffer can absorb the energy generated by the impact, greatly reduce the impact and vibration caused by the object to the machine, and avoid damage due to impact vibration.
3. Improve Shock Absorbers product quality: the buffer eliminates the shock caused by impact objects and the damaging impact, allowing the smooth operation of the machine and equipment, and improving the product quality.
4. Significantly reduce noise, and provide a quiet working environment.
5. Improve the safety of mechanical running.
Product of Shock Absorbers Features
2. Miniaturized design and strong space adaptability.
3. Shock Absorbers energy smoothly and softly.
4. Shock Absorbers Abundant stock and fast delivery.
5. Long life with 800,000 times being used for reference.
Dimensional Shock Absorbers Drawing
Specifications of Shock Absorbers Overview
| Impact Speed Type | Maximum Collision Velocity | Operating Environment Temperature | Reference number of replacements |
| Heavy Load Absorption Type | ～4.8m/s | -5 to 70℃ | 800,000 cycles |
■Shock Absorbers Material Table
 Shock Absorbers Material |  Shock Absorbers Surface Treatment | |
| Body | Cover | |
| STKM11A | Urethane | Ferroferric Oxide Protective Film |
Example of Shock Absorbers Use
Example of Shock Absorbers Use 1
Example of Shock Absorbers Use 2
Precautions Shock Absorbers
| Coarse Outer Diameter (mm) | M8×1.0 | M10×1.0 | M12×1.0 | M14×1.5 | M20×1.5 | M25×1.5 | M27×1.5 |
| Tightening torque of nut (N.m) | 3.9 | 7.8 | 7.8 | 9.8 | 29.4 | 49 | 58.8 |
2. Pay attention to check whether the head circlip is off.
■ Overloaded buffer will cause abnormal increase in the internal pressure of the buffer tube, making the head circlip off, and internal parts may pop up and cause injury.
■ When the buffer with the head circlip is working, please keep your face and other parts away from it.
3. Please pay attention to the splash of the broken buffer head due to impact.
■ Shock Absorbers Overload use will cause damage to the head, resulting in injury.
■ It is recommended to install an anti-splashing cover.
4. Please pay attention to lateral misalignment load and lateral misalignment angle.
■ When the lateral misalignment load exceeds ±2.5 degrees, it will cause piston rod bending, bad reset, and internal lateral misalignment friction, resulting in performance degradation and even product breakage.
Please aim at the center line of the buffer piston rod for impact. (If the lateral misalignment angle is greater than ±2.5 degrees, please use the angular misalignment Shock Absorbers (the range of lateral misalignment:± within 10 degrees)
5. Operating Temperature Range
■ Please use the buffer within the specified temperature range.
▪ Use outside the specified range will reduce the life of the seal packing and the pressure accumulating sponge, and cause the buffer to break.
6. Operating Environment Requirements
■ Please do not use it under medium or high pressure in a vacuum environment.
■ Keep the guide shaft clean, and avoid cutting powder, cutting fluid, water, etc. from being attached to the guide shaft, otherwise it will cause seal damage, oil leakage, poor buffer action, and buffer damage.
※ If you need to use it in the cutting fluid environment, please Shock Absorbers choose Misumi’s cutting fluid resistant buffer series products. See Misumi's official website.
8. Shock Absorbers To prevent the buffer from increasing lateral load, the distance between the installation position of the buffer and the fulcrum should be equal to or greater than 6 times of the buffer stroke.
And when the side load and the buffer center line form an angle of 5°, the Shock Absorbers energy is the maximum.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nominal Mounting Screw [M] | Stroke (mm) | Max. Absorbed Energy (J) | Nominal Mounting Screw [Inch] | Max. Collision Velocity (m/s) | Mating Accessories 1 - Stopper Nut | Mating Accessories 2 - Mounting Flange |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 478.14 | 1 Piece(s) | Available | 10 Day(s) | 42 | 25 | 260 | - | 3.6 | Not Provided | Not Provided | |
MYR 572.02 | 1 Piece(s) | Available | 7 Day(s) | 42 | 25 | 260 | - | 3.6 | Not Provided | Provided | |
MYR 553.28 | 1 Piece(s) | Available | 7 Day(s) | 42 | 25 | 260 | - | 3.6 | Provided | Not Provided | |
MYR 646.88 | 1 Piece(s) | Available | 7 Day(s) | 42 | 25 | 260 | - | 3.6 | Provided | Provided | |
MYR 516.78 | 1 Piece(s) | Available | 10 Day(s) | 42 | 50 | 500 | - | 4.8 | Not Provided | Not Provided | |
MYR 555.12 | 1 Piece(s) | Available | 1 Day(s) | 42 | 75 | 750 | - | 4.8 | Not Provided | Not Provided | |
MYR 648.34 | 1 Piece(s) | Available | 7 Day(s) | 42 | 75 | 750 | - | 4.8 | Not Provided | Provided | |
MYR 629.66 | 1 Piece(s) | Available | 7 Day(s) | 42 | 75 | 750 | - | 4.8 | Provided | Not Provided | |
MYR 723.24 | 1 Piece(s) | Available | 7 Day(s) | 42 | 75 | 750 | - | 4.8 | Provided | Provided | |
MYR 1,244.34 | 1 Piece(s) | Available | 10 Day(s) | - | 50 | 12000 | UNF2-1/2 | 3.5 | Not Provided | Not Provided | |
MYR 1,367.62 | 1 Piece(s) | Available | 7 Day(s) | - | 50 | 1200 | UNF2-1/2 | 3.5 | Not Provided | Provided | |
MYR 1,437.36 | 1 Piece(s) | Available | 10 Day(s) | - | 100 | 24000 | UNF2-1/2 | 3.5 | Not Provided | Not Provided | |
MYR 1,558.66 | 1 Piece(s) | Available | 7 Day(s) | - | 100 | 2400 | UNF2-1/2 | 3.5 | Not Provided | Provided | |
MYR 1,631.42 | 1 Piece(s) | Available | 10 Day(s) | - | 150 | 36000 | UNF2-1/2 | 3.5 | Not Provided | Not Provided | |
MYR 1,750.86 | 1 Piece(s) | Available | 7 Day(s) | - | 150 | 3600 | UNF2-1/2 | 3.5 | Not Provided | Provided |
Loading...
| NO. | Mounting Screw Nominal (M) | Stroke (S) | Maximum Energy Absorbed (E') | Maximum Equivalent Mass (me') (kg) | Maximum Collision Velocity (M/S) | Total Length (L) | L1 | L2 | T | t | d | d1 | G | B (Both sides width) | |
| Per Cycle (J) | Per minute (J) | ||||||||||||||
| 4225 | M42×1.5 | 25.0 | 260.0 | 2160.0 | 3000.0 | 3.6 | 191.0 | 98.5 | 20.0 | 15.0 | 33.5 | 44.5 | 12.0 | 14.0 | 50.0 |
| 4250 | M42×1.5 | 50.0 | 500.0 | 2580.0 | 4000.0 | 4.8 | 258.0 | 135.5 | 20.0 | 15.0 | 38.5 | 44.5 | 12.0 | 14.0 | 50.0 |
| 4275 | M42×1.5 | 75.0 | 750.0 | 3110.0 | 6000.0 | 4.8 | 308.0 | 160.5 | 20.0 | 15.0 | 38.5 | 44.5 | 12.0 | 14.0 | 50.0 |
| 64050 | UNF 2 1/2-12 | 50.0 | 12000.0 | 26000.0 | 12727.0 | 3.5 | 247.0 | 26.0 | 97.0 | 10.0 | 51.0 | 59.0 | 20.0 | 23.0 | 76.0 |
| 64100 | UNF 2 1/2-12 | 100.0 | 24000.0 | 32000.0 | 18181.0 | 3.5 | 347.0 | 26.0 | 147.0 | 10.0 | 51.0 | 59.0 | 20.0 | 23.0 | 76.0 |
| 64150 | UNF 2 1/2-12 | 150.0 | 36000.0 | 42000.0 | 23636.0 | 3.5 | 467.0 | 26.0 | 207.0 | 10.0 | 61.0 | 59.0 | 20.0 | 23.0 | 76.0 |
Basic Information
| Structure | Adjustable | Main Body, Related Components | Main Body | Orifice Type | Irregular Multi Orifice |
|---|---|---|---|---|---|
| Operating Environment | Standard | Body Material | STKM11A | Operating Temperature Range(°C) | -5::70 |
Specification/Dimensions
-
Nominal Mounting Screw [M]
-
Stroke(mm)
-
Max. Absorbed Energy(J)
-
Nominal Mounting Screw [Inch]
-
Max. Collision Velocity(m/s)
-
Mating Accessories 1 - Stopper Nut
- Not Provided
- Provided
-
Mating Accessories 2 - Mounting Flange
- Not Provided
- Provided
-
type
- E-MSZXAD□□□□
- E-MSZXAD□□□□□
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 7 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the advantages of the economy series heavy load shock absorber? What are its applications?
- Answer: The economy series heavy load shock absorber has a unique internal pressure cylinder combination structure, capable of absorbing high energy impact load; it is commonly used in high load automotive industry, die casting mold, truss machine, etc.
- Question: Is there a quantity discount for economy series heavy load shock absorber? What is the delivery time?
- Answer: The economy series heavy load shock absorber offers stepped discount, more discounts for more purchases. The products are stock items, and the delivery time is 1 day for the quantity less than 20 pieces.
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy