(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Kindly be informed that it will be peak period in conjunction with the Chinese New Year festive season. Delivery pickup upon 25 January 2025 estimated would arrive after CNY holidays. Please expect slight delay for orders shipped during this peak season and we thank you for your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Nylon Coated Cam Followers -Stainless Steel Body (E-CFFRUDSS16-35)
- Volume Discount
Part Number
Configured Part Number is shown.
E-CFFRUDSS16-35
1.米思米嵌入式"Grooving"凸轮随动器技术（专利申请中）。改变以往传统加工方法，解决荷重大、偏荷重、转速高的情况下容易出现树脂外圈脱落的问题。
2.多角度荷重走行模拟的测试结果，比现有同类产品脱胶的性能提高7倍以上。（*米思米测试设备）
测试方法
请尽量使带树脂凸轮轴承随动器的倾斜度为零。【材质特性】
| 项目 | 聚氨酯 | MC尼龙 |
| 耐负载性 | △ | ○ |
| 耐磨性 | ○ | △ |
| 机械强度 | ○ | ◎ |
| 耐热性 | × | △ |
| 耐化学药品性 | × | ○ |
 材质 |  附件 | |
| 树脂 | 凸轮随动器 | |
| 尼龙 | SUS440 | 1个内六角螺帽(SUS304) |
使用环境温度80℃以下。d16以下没有润滑脂补充孔。
| Type | Type | 密封圈 | 材质 | 附件 | ||
| (d3～10) | (d12～20) | 树脂 | 凸轮随动器 | |||
| 头部内六角孔 | 头部螺纹部内六角孔 | |||||
| E-CFFRUDSS | R型 | 有 | 尼龙 | SUS440 | 1个内六角螺帽(SUS304) | |
| E-CFFRUCSS | 圆柱型 | 有 | 尼龙 | SUS440 | 1个内六角螺帽(SUS304) | |
 TYPE |  dH7容差 |  D选择 | M×螺距 | B | B1 | L | ℓ | ℓ1 | H | d | 容许负载（N） | 容许转速(rpm) |
| E-CFFRUDSS E-CFFRUCSS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 5 | - | 2 | - | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 6 | - | 2.5 | - | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 7.5 | - | 3 | - | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12.2 | 28 | 8 | - | 4 | - | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 10 | - | - | 504 | 1960 | ||||
| 10 | 22 | 10×1.0 | 12 | 13.2 | 36 | 12 | - | 5 | - | 555 | 1760 | |
| 26 | 10×1.0 | - | - | 592 | 1560 | |||||||
| 12 | 30 | 12×1.5 | 14 | 15.2 | 40 | 13 | 6 | 6 | 3 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||||||
| 16 | 35 | 16×1.5 | 18 | 19.6 | 52 | 17 | 8 | 8 | 840 | 1230 | ||
| 18 | 40 | 18×1.5 | 20 | 21.6 | 58 | 19 | 886 | 1080 | ||||
| 20 | 52 | 20×1.5 | 24 | 25.6 | 66 | 21 | 9 | 10 | 4 | 1044 | 830 |
容许负载为速度＝10km/h时的数值。kgf＝N×0.101972| 用途 | 防噪音传送用 | |
| 特长 | 尼龙包覆型 | 聚氨酯包覆型 |
| 产品说明 |  |  |
| 将树脂压入凸轮轴承随动器的类型。树脂吸收配对侧的冲击，起到抑制旋转时的噪音的作用。 | 在凸轮轴承随动器上烧结聚氨酯的类型。聚氨酯吸收配对侧的冲击，起到抑制旋转时的噪音的作用。 | |
安装时请勿用锤子直接敲打凸轮轴承的凸缘部，否则会造成旋转不良或者断裂。请用内六角棒扳手固定内六角进行固定，然后用扳手转动螺母拧紧。
・如果凸轮轴承随动器掉落地面，或者用力敲击，则可能导致损坏。
・施加冲击时，即使外观看不出有损坏，也可能导致功能受损，敬请注意。
・凸轮轴承随动器适用于径向负载，不太适用于推力负载，因此请避免施加推力负载之类的使用方法。
・请尽量使带树脂凸轮随动器的倾斜角度为零。
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-CFFRUDSS16-35 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Roller Outer Dia. D (Ø) | Roller Width B (mm) | Roller Type | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 287.12 | 1 Piece(s) | Available | 10 Day(s) | 35 | 18 | Spherical Outer Ring | Hex Socket on Head Thread | 1230 | 525 | 16X1.5 |
Loading...
使用环境温度80℃以下。d16以下没有润滑脂补充孔。| Type | Type | 密封圈 | 材质 | 附件 | ||
| (d3～10) | (d12～20) | 树脂 | 凸轮随动器 | |||
| 头部内六角孔 | 头部螺纹部内六角孔 | |||||
| E-CFFRUDSS | R型 | 有 | 尼龙 | SUS440 | 1个内六角螺帽(SUS304) | |
| E-CFFRUCSS | 圆柱型 | 有 | 尼龙 | SUS440 | 1个内六角螺帽(SUS304) | |
| TYPE | dH7容差 | D选择 | M×螺距 | B | B1 | L | ℓ | ℓ1 | H | d | 容许负载（N） | 容许转速(rpm) |
| E-CFFRUDSS E-CFFRUCSS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 5 | - | 2 | - | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 6 | - | 2.5 | - | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 7.5 | - | 3 | - | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12.2 | 28 | 8 | - | 4 | - | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 10 | - | - | 504 | 1960 | ||||
| 10 | 22 | 10×1.0 | 12 | 13.2 | 36 | 12 | - | 5 | - | 555 | 1760 | |
| 26 | 10×1.0 | - | - | 592 | 1560 | |||||||
| 12 | 30 | 12×1.5 | 14 | 15.2 | 40 | 13 | 6 | 6 | 3 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||||||
| 16 | 35 | 16×1.5 | 18 | 19.6 | 52 | 17 | 8 | 8 | 840 | 1230 | ||
| 18 | 40 | 18×1.5 | 20 | 21.6 | 58 | 19 | 886 | 1080 | ||||
| 20 | 52 | 20×1.5 | 24 | 25.6 | 66 | 21 | 9 | 10 | 4 | 1044 | 830 |
容许负载为速度＝10km/h时的数值。kgf＝N×0.101972
Basic Information
| Product Category | Cam Followers | Cam Follower Type | Plastic | Size Standards | Metric System |
|---|---|---|---|---|---|
| Shaft | Provided | Roller Guiding Method | With Retainer |
Please check the type/dimensions/specifications of the part E-CFFRUDSS16-35 in the Nylon Coated Cam Followers -Stainless Steel Body series.
Specification/Dimensions
-
Roller Outer Dia. D(Ø)
-
Roller Width B(mm)
-
Roller Type
- Spherical Outer Ring
- Cylindrical Outer Ring
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head Thread
-
-
Allowable Rotational Speed(rpm)
-
Allowable Load(N)
-
Stud Screw Nominal Thread (M)(mm)
- 3X0.5
- 4X0.7
- 5X0.8
- 6X1.0
- 8X1.25
- 10X1.0
- 12X1.5
- 16X1.5
- 18X1.5
- 20X1.5
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| E-CFFRUCSS12-32 |
| E-CFFRUCSS16-35 |
| E-CFFRUCSS18-40 |
| E-CFFRUDSS18-40 |
| E-CFFRUDSS20-52 |
| E-CFFRUDSS3-10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Roller Outer Dia. D (Ø) | Roller Width B (mm) | Roller Type | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 191.24 | 1 Piece(s) | Available | 10 Day(s) | 32 | 14 | Cylindrical Outer Ring | Hex Socket on Head Thread | 1320 | 487 | 12X1.5 | |
MYR 224.22 | 1 Piece(s) | Available | 10 Day(s) | 35 | 18 | Cylindrical Outer Ring | Hex Socket on Head Thread | 1230 | 525 | 16X1.5 | |
MYR 266.96 | 1 Piece(s) | Available | 10 Day(s) | 40 | 20 | Cylindrical Outer Ring | Hex Socket on Head Thread | 1080 | 554 | 18X1.5 | |
MYR 342.66 | 1 Piece(s) | Available | 10 Day(s) | 40 | 20 | Spherical Outer Ring | Hex Socket on Head Thread | 1080 | 554 | 18X1.5 | |
MYR 403.18 | 1 Piece(s) | Available | 10 Day(s) | 52 | 24 | Spherical Outer Ring | Hex Socket on Head Thread | 830 | 653 | 20X1.5 | |
MYR 185.16 | 1 Piece(s) | Available | 10 Day(s) | 10 | 7 | Spherical Outer Ring | Hex Socket on Head | 3200 | 149 | 3X0.5 |
Additional Products in this Category
- Cam Followers-Standard/Crowned Type/With Seal/No Seal
- Cam Followers-With Female Thread Hole for Grease Fitting/Crowned Type
- Cam Followers Urethane-With Hexagon Socket/R Type/With Seal/No Seal
- Cam Followers Flat, Hex Socket
- Roller Followers - Non Separate
- Double Row Cylindrical-Type Roller Follower, NUTR
- Roller Follower
- Cam Follower CFH-AB Type
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy