(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
[Clean & Pack] Rotary Shaft - End Shape Selectable
![[Clean & Pack] Rotary Shaft - End Shape Selectable](http://content.misumi-ec.com/image/upload/t_product_main/v1/p/jp/product/series/110310638639/110310638639_001_20230911105917.jpg?$product_main$)
Click this image to zoom it.
Move the mouse over the image to zoom
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
(i)Caution
- See here for related information such as technical information on cleaning effects and other cleaned product lineups.
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
Material shape (Both shaft ends A shape)
[ ! ] (Y) ≤ D × 50 is required for (Y) dimension.
[ ! ] When only one end needs to be machined, select A Shape for the other end
.
[ ! ] When L dimension is less than the tap pilot hole depth, the pilot hole might go through.
[ ! ] H and J will not be symmetrical when applied to both ends of the shaft.
[ ! ] H and J may be out of phase with other alterations.
[!] Retaining ring is not included for F and G machining. Please note this.
[ ! ] (Y) ≤ D × 50 is required for (Y) dimension.
[ ! ] When only one end needs to be machined, select A Shape for the other end
.
[ ! ] When L dimension is less than the tap pilot hole depth, the pilot hole might go through.
[ ! ] H and J will not be symmetrical when applied to both ends of the shaft.
[ ! ] H and J may be out of phase with other alterations.
[!] Retaining ring is not included for F and G machining. Please note this.
| Left End Shape | Right End Shape | Machining Conditions | ||||||
A | A | — | ||||||
B | B | For M3 to 8 M ≤ D−2 For M10 to 16 M ≤ D−3 For M20, 24 M ≤ D−4 For M30 M ≤ D−5 | ||||||
C | C | P (Q) = M (N) Specify M (N) Dimension. Specification of P(Q) dimension is not required. | ||||||
D | D | — | ||||||
E | E | For M3 to 8, M(N) ≤ P(Q) - 2 For M10 to 16, M(N) ≤ P(Q) - 3 For M20 or 24, M(N) ≤ P(Q) - 4 For M30, M(N) ≤ P(Q) - 5 | ||||||
F | F | D dimension, 27, 31, 33, 34 36·37·38·39·41 42·43·44·46·47 48 and 49 cannot be specified | ||||||
G | G | P, Q dimensions, 27, 31, 33, 34 36·37·38·39·41 42·43·44·46·47 48 and 49 cannot be specified | ||||||
H | H | Applicable when D ≤ 30 | ||||||
J | J | R(W) - M(N) ≥ t D－R－M ≥ 2 D－W－N ≥ 2
M × 2 N × 2 |
| Type | [M] Material | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | ||
| SL-SSFR□□ | SUS304 | Degreasing | General environment | Anti-rust packing | General environment |
| SH-SSFR□□ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |
| SHD-SSFR□□ | Electrolytic polishing + precision cleaning | ||||
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number | — | D | — | L | — | F | — | B | — | H | — | P | — | M | — | T | — | S | — | U | — | Q | — | N | — | R | — | W |
| SL-SSFRCE | — | D15 | — | L350 | — | F20 | — | B16 | — | M8 | — | T20 | — | Q14 | — | N6 |
| Part Number | 1 mm Increments | 0.1 mm Increments | 1 mm Increments | Selection | 1 mm Increments | C | |||||||
| Type | Left End Shape | Right End Shape | D | L | F·T | B·S | H·U | P·Q | M·N | R·W | |||
| SL-SSFR SH-SSFR SHD-SSFR | A B C D E F G H J | A B C D E F G H J | 6 to 50 | 20.0 to 800.0 (L ≤ D × 50) | 2 ≤ F ≤ P × 5 2 ≤ T ≤ Q × 5 | When M, N ≤ 10 | D/3 ≤ P·Q < D | 3 6 12 24 | 4 8 16 30 | 5 10 20 | D ≥ M+4+R D ≥ N+4+W R ≥ M+3 W ≥ N+3 | 0.5 | |
| 2 ≤ B ≤ M × 3 | When D, P, Q ≤ 6 | ||||||||||||
| 2 ≤ S ≤ N × 3 | 2 ≤ H·U | ||||||||||||
| & | |||||||||||||
| B ≤ F－3 | When 6 < D, P, Q ≤ 10 | ||||||||||||
| S ≤ T－3 | 3 ≤ H·U | ||||||||||||
| When M, N ≥ 12 | |||||||||||||
| 2 ≤ B ≤ M × 3 | When 10 < D, P, Q ≤ 20 | ||||||||||||
| 2 ≤ S ≤ N × 3 | 4 ≤ H·U | ||||||||||||
| & | |||||||||||||
| B ≤ F－5 | When 20 < D, P, Q | ||||||||||||
| S ≤ T－5 | 5 ≤ H·U | ||||||||||||
| [ ! ]B ≥ Pitch × 3 | |||||||||||||
| S ≥ Pitch × 3 | |||||||||||||
| Coarse Thread Dimensions | |
| M | Pitch |
| 3 | 0.5 |
| 4 | 0.7 |
| 5 | 0.8 |
| 6 | 1.0 |
| 8 | 1.25 |
| 10 | 1.5 |
| 12 | 1.75 |
| 16 | 2.0 |
| 20 | 2.5 |
| 24 | 3.0 |
| 30 | 3.5 |
Alterations
| Part Number | — | D | — | L | — | F | — | B | — | H | — | P | — | M (PMC) | — | T | — | S | — | U | — | Q | — | N (QNC) | — | R | — | W | — | (KC, WKC, RC..etc.) |
| SL-SSFRJA | — | D20 | — | L350 | — | M4 | — | R10 | — | LKC |
| Alterations Code | Alteration Details | Applicable Conditions | Ordering Example | ||||||||
| KC | Keyway at one location | KC, A = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, | SL−SSFRDD30−300−F25−P20−T25−Q10−KC20−A10 | ||||||||
| WKC | Keyways at two locations | WKC, C, K, E = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, | SL−SSFRDD30−300−F25−P20−T25−Q10−WKC5−C20−K5−E10 | ||||||||
| PKC·QKC | Keyway on Step P (0 Point on the End Face) | PKC, QKC = 0.1 mm Increments [ ! ] Keyway length ≤ 70 [NG] Not applicable when P ≤ 5 | SL−SSFRDD30−300−F25−P20−T25−Q10−PKC20.0 | ||||||||
| FC | Set screw flat at one location | FC, G = 1 mm Increments [ ! ]G ≤ 70
| SL−SSFRDD30−300−F25−P20−T25−Q10−FC10−G5 | ||||||||
| WFC | Set screw flats at two locations | WFC, J, W, V = 1 mm Increments [ ! ]J·V ≤ 70
| SL−SSFRDD30−300−F25−P20−T25−Q10−WFC10−J15−W10−V20 | ||||||||
| SFC | Set Screw Flat, 2 Set Screw Flats (Angle Specified) | SFC, SG = 1 mm Increments AG = 15° Increments [ ! ]SG ≤ 70 | SL−SSFRDD30−300−F25−P20−T25−Q10−SFC10−SG3−AG120 | ||||||||
| UC | Slit Cam Groove | UC = 1 mm Increments [ ! ] For D dimensions 6, 8, 10 and 12 only | SL−SSFRDD10−300−F25−P8−T25−Q8−UC10 | ||||||||
| LKC | L Dimension Tolerance Change | L < 500···L±0.05 L ≥ 500···L±0.1 [NG] L800 or more is not applicable | SL−SSFRDD30−300−F25−P20−T25−Q10−LKC | ||||||||
| CKC | Concentricity | Change the concentricity to 0.02. [NG] Not applicable when D Tol. = h9 [ ! ] For Lmax, see the table on the right
| SL−SSFRDD30−300−F25−P20−T25−Q10−CKC | ||||||||
| SC | Wrench Flats | SC = 1 mm Increments [ ! ]SC+ℓ2 ≤ L [ ! ] SC = 0 or SC ≥ 1 | SL−SSFRDD30−300−F25−P20−T25−Q10−SC10 | ||||||||
| PMC·QNC | Change to fine thread | Change coarse thread to fine thread. Specify PMC instead of P and QNC instead of Q | SL−SSFRCC30−300−F25−B20−M20−T25−S20−QNC10 | ||||||||
| PC·QC | Added Undercut Dimensions | Add undercut to Dimension P and Dimension Q. [NG] Not applicable when D = P or D = Q | SL−SSFRCC30−300−F25−B20−M20−T25−S20−N20−PC |
[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
|
|  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cleaning Process·Degreasing (Part Number: SL-□□)
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Alkaline warm pure water |  |  Ultrasonic pure water cleaning after cleaning with pure water *3 times | |  Dry | |  Anti-rust single packing |
·Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm) | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm) | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□)  | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SH-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCB-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCB-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCB-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCB-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCE-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[3-49/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCE-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[3-49/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCE-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[3-49/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCE-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[3-49/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCF-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-U[2-800/1] |
| SH-SSFRCF-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-U[2-800/1] |
| SH-SSFRCF-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-U[2-800/1] |
| SH-SSFRCF-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-U[2-800/1] |
| SH-SSFRCG-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-U[2-198/1]-Q[3-26/1] |
| SH-SSFRCG-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-U[2-198/1]-Q[28,29,30,32,35,40,45,50] |
| SH-SSFRCG-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-U[2-198/1]-Q[3-26/1] |
| SH-SSFRCG-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-U[2-198/1]-Q[28,29,30,32,35,40,45,50] |
| SH-SSFRCG-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-U[2-198/1]-Q[3-26/1] |
| SH-SSFRCG-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-U[2-198/1]-Q[28,29,30,32,35,40,45,50] |
| SH-SSFRCG-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-U[2-198/1]-Q[3-26/1] |
| SH-SSFRCG-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-U[2-198/1]-Q[28,29,30,32,35,40,45,50] |
| SH-SSFRCH-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCH-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCJ-D[15-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-W[7-42/1] |
| SH-SSFRCJ-D[15-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-N[3,4,5,6,8,10,12,16,20,24,30]-W[7-42/1] |
| SH-SSFRCJ-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-W[7-42/1] |
| SH-SSFRCJ-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-N[3,4,5,6,8,10,12,16,20,24,30]-W[7-42/1] |
| SHD-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCB-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCB-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCB-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCB-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCC-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCC-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-150/0.1]-S[0-90/1]-QNC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Dia. D (mm) | End Shape (Left) | Basic Shape_02 | End Shape (Right) | Length L (mm) | Cleaning Method | Left End Shape | Right End Shape | F (mm) | Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M] (㎜) | B (mm) | R (㎜) | H (mm) | P (mm) | M (mm) | Change to Fine Thread [PMC] | T (mm) | S (mm) | U (mm) | Q (mm) | N (mm) | Change to Fine Thread [QNC] (mm) | R (mm) | W (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | E | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 3 ～ 49 | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | E | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 3 ～ 49 | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | E | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 3 ～ 49 | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | E | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 3 ～ 49 | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | F | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | 2 ～ 800 | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | F | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | 2 ～ 800 | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | F | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | 2 ～ 800 | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | F | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | 2 ～ 800 | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | 2 ～ 198 | 3 ～ 26 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | 2 ～ 198 | 28 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | 2 ～ 198 | 3 ～ 26 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | 2 ～ 198 | 28 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | 2 ～ 198 | 3 ～ 26 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | 2 ～ 198 | 28 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | 2 ～ 198 | 3 ～ 26 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Retaining Ring Grooves on Both Ends | 20 ～ 800 | Precision Cleaning | C | G | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | 2 ～ 198 | 28 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Hex Socket | 20 ～ 800 | Precision Cleaning | C | H | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Hex Socket | 20 ～ 800 | Precision Cleaning | C | H | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 15 ～ 30 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | J | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | 3 ～ 30 | - | - | 7 ～ 42 | ||
- | 1 Piece(s) | 12 Day(s) or more | 15 ～ 30 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | J | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | 3 ～ 30 | - | - | 7 ～ 42 | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | J | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | 3 ～ 30 | - | - | 7 ～ 42 | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Precision Cleaning | C | J | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | 3 ～ 30 | - | - | 7 ～ 42 | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Tapped | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | B | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | - | - | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Threaded | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | C | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 150 | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | D | 2 ～ 150 | - | 0 ～ 90 | - | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | D | 2 ～ 150 | - | 0 ～ 90 | - | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - |
Loading...
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Clean Washed | Material_02 | SUS304 |
|---|---|---|---|---|---|
| Hardness | Unhardened | Material Details | SUS304 | Keyway | Keyway Option (Alteration) |
| Surface Treatment_02 | Not Provided | D Tolerance | g6 (Ground) | Material Certificate | Available |
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Basic Shape_02
-
Straight -
One End Stepped -
Both Ends Stepped
-
-
End Shape (Right)
-
Straight -
Tapped -
Threaded -
Retaining Ring Grooves on Both Ends -
Hex Socket -
Tapped
-
-
Length L(mm)
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
-
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
- J
-
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
- J
-
F(mm)
-
Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M](㎜)
-
B(mm)
-
R(㎜)
-
H(mm)
-
P(mm)
-
M(mm)
-
Change to Fine Thread [PMC]
-
T(mm)
-
S(mm)
-
U(mm)
-
Q(mm)
-
N(mm)
-
Change to Fine Thread [QNC](mm)
-
R(mm)
-
W(mm)
-
type
- SH-SSFRAA
- SH-SSFRAB
- SH-SSFRAC
- SH-SSFRAD
- SH-SSFRAE
- SH-SSFRAF
- SH-SSFRAG
- SH-SSFRAH
- SH-SSFRAJ
- SH-SSFRBA
- SH-SSFRBB
- SH-SSFRBC
- SH-SSFRBD
- SH-SSFRBE
- SH-SSFRBF
- SH-SSFRBG
- SH-SSFRBH
- SH-SSFRBJ
- SH-SSFRCA
- SH-SSFRCB
- SH-SSFRCC
- SH-SSFRCD
- SH-SSFRCE
- SH-SSFRCF
- SH-SSFRCG
- SH-SSFRCH
- SH-SSFRCJ
- SH-SSFRDA
- SH-SSFRDB
- SH-SSFRDC
- SH-SSFRDD
- SH-SSFRDE
- SH-SSFRDF
- SH-SSFRDG
- SH-SSFRDH
- SH-SSFRDJ
- SH-SSFREA
- SH-SSFREB
- SH-SSFREC
- SH-SSFRED
- SH-SSFREE
- SH-SSFREF
- SH-SSFREG
- SH-SSFREH
- SH-SSFREJ
- SH-SSFRFA
- SH-SSFRFB
- SH-SSFRFC
- SH-SSFRFD
- SH-SSFRFE
- SH-SSFRFF
- SH-SSFRFG
- SH-SSFRFH
- SH-SSFRFJ
- SH-SSFRGA
- SH-SSFRGB
- SH-SSFRGC
- SH-SSFRGD
- SH-SSFRGE
- SH-SSFRGF
- SH-SSFRGG
- SH-SSFRGH
- SH-SSFRGJ
- SH-SSFRHB
- SH-SSFRHC
- SH-SSFRHE
- SH-SSFRHJ
- SH-SSFRJA
- SH-SSFRJB
- SH-SSFRJC
- SH-SSFRJD
- SH-SSFRJE
- SH-SSFRJF
- SH-SSFRJG
- SH-SSFRJH
- SH-SSFRJJ
- SHD-SSFRAA
- SHD-SSFRAB
- SHD-SSFRAC
- SHD-SSFRAD
- SHD-SSFRAE
- SHD-SSFRAF
- SHD-SSFRAG
- SHD-SSFRAH
- SHD-SSFRAJ
- SHD-SSFRBA
- SHD-SSFRBB
- SHD-SSFRBC
- SHD-SSFRBD
- SHD-SSFRBE
- SHD-SSFRBF
- SHD-SSFRBG
- SHD-SSFRBH
- SHD-SSFRBJ
- SHD-SSFRCA
- SHD-SSFRCB
- SHD-SSFRCC
- SHD-SSFRCD
- SHD-SSFRCE
- SHD-SSFRCF
- SHD-SSFRCG
- SHD-SSFRCH
- SHD-SSFRCJ
- SHD-SSFRDA
- SHD-SSFRDB
- SHD-SSFRDC
- SHD-SSFRDD
- SHD-SSFRDE
- SHD-SSFRDF
- SHD-SSFRDG
- SHD-SSFRDH
- SHD-SSFRDJ
- SHD-SSFREA
- SHD-SSFREB
- SHD-SSFREC
- SHD-SSFRED
- SHD-SSFREE
- SHD-SSFREF
- SHD-SSFREG
- SHD-SSFREH
- SHD-SSFREJ
- SHD-SSFRFA
- SHD-SSFRFB
- SHD-SSFRFC
- SHD-SSFRFD
- SHD-SSFRFE
- SHD-SSFRFF
- SHD-SSFRFG
- SHD-SSFRFH
- SHD-SSFRFJ
- SHD-SSFRGA
- SHD-SSFRGB
- SHD-SSFRGC
- SHD-SSFRGD
- SHD-SSFRGE
- SHD-SSFRGF
- SHD-SSFRGG
- SHD-SSFRGH
- SHD-SSFRGJ
- SHD-SSFRHB
- SHD-SSFRHC
- SHD-SSFRHE
- SHD-SSFRHJ
- SHD-SSFRJA
- SHD-SSFRJB
- SHD-SSFRJC
- SHD-SSFRJD
- SHD-SSFRJE
- SHD-SSFRJF
- SHD-SSFRJG
- SHD-SSFRJH
- SHD-SSFRJJ
- SL-SSFRAA
- SL-SSFRAB
- SL-SSFRAC
- SL-SSFRAD
- SL-SSFRAE
- SL-SSFRAF
- SL-SSFRAG
- SL-SSFRAH
- SL-SSFRAJ
- SL-SSFRBA
- SL-SSFRBB
- SL-SSFRBC
- SL-SSFRBD
- SL-SSFRBE
- SL-SSFRBF
- SL-SSFRBG
- SL-SSFRBH
- SL-SSFRBJ
- SL-SSFRCA
- SL-SSFRCB
- SL-SSFRCC
- SL-SSFRCD
- SL-SSFRCE
- SL-SSFRCF
- SL-SSFRCG
- SL-SSFRCH
- SL-SSFRCJ
- SL-SSFRDA
- SL-SSFRDB
- SL-SSFRDC
- SL-SSFRDD
- SL-SSFRDE
- SL-SSFRDF
- SL-SSFRDG
- SL-SSFRDH
- SL-SSFRDJ
- SL-SSFREA
- SL-SSFREB
- SL-SSFREC
- SL-SSFRED
- SL-SSFREE
- SL-SSFREF
- SL-SSFREG
- SL-SSFREH
- SL-SSFREJ
- SL-SSFRFA
- SL-SSFRFB
- SL-SSFRFC
- SL-SSFRFD
- SL-SSFRFE
- SL-SSFRFF
- SL-SSFRFG
- SL-SSFRFH
- SL-SSFRFJ
- SL-SSFRGA
- SL-SSFRGB
- SL-SSFRGC
- SL-SSFRGD
- SL-SSFRGE
- SL-SSFRGF
- SL-SSFRGG
- SL-SSFRGH
- SL-SSFRGJ
- SL-SSFRHB
- SL-SSFRHC
- SL-SSFRHE
- SL-SSFRHJ
- SL-SSFRJA
- SL-SSFRJB
- SL-SSFRJC
- SL-SSFRJD
- SL-SSFRJE
- SL-SSFRJF
- SL-SSFRJG
- SL-SSFRJH
- SL-SSFRJJ
-
End Shape (Left)
-
Unfinished -
Tapped -
Threaded -
Retaining Ring Grooves on Both Ends -
Hex Socket -
Tapped
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Driving Shafts - One End Stepped One End Double Stepped
- Rotary Shafts - Both Ends Stepped with Retaining Ring Grooves
- Rotary Shafts-One End Threaded/One End Tapped
- Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Tapped
- Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped and Tapped
- Rotary Shafts One End Tapped
- Rotary Shafts Both Ends Stepped
- Rotary Shafts Straight
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy