(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Motorized Rotary Stages Ball Screw Type
- Volume Discount
Part Number
Configured Part Number is shown.
Product Overview of Rotary
MISUMI E-RMBG series motorized Rotary is an economy series Rotary equipped with a two-phase stepper motor. Ball screw transmission is adopted to achieve small-angle rotary positioning. Optimized structure and low prices areachieved through local production.
Product Features of Rotary
Feature 1: Suitable Rotary for small-angle frequent adjustments.
Feature 2: Optimized structure and low prices are achieved through local production.
Feature 3: Quick disassembling is achieved by adding dowel holes to the Rotary surface.
Feature 4: Standard equipped driver is applicable to dual pulse and pulse + direction control, which can be used under multiple working conditions.
Feature 2: Optimized structure and low prices are achieved through local production.
Feature 3: Quick disassembling is achieved by adding dowel holes to the Rotary surface.
Feature 4: Standard equipped driver is applicable to dual pulse and pulse + direction control, which can be used under multiple working conditions.
Dimensional Drawing of Rotary
Specifications Overview of Rotary
 Body Material of Rotary |  Surface Treatment of Rotary | Travel Distance (°) | Load Capacity (N) | Accuracy Specification | ||
| One-Way Positioning Accuracy | Repetitive Positioning Accuracy | Parallelism | ||||
| Aluminum Alloy | Black Anodized | ±12°~±12.5° | 39.2~117.6 | 0.08° | ±0.01° | 50μm |
Usage Method of Rotary
The E-RMBG series Rotary has been equipped with the two-phase stepper motor, which needs to be used in combination with MISUMI two-phase stepper motor driver, cable and the 24 V power supply and host computer (PLC or motion controlcard) prepared by the customer. The example of connection among various products is shown in the figure below.
* 1. The cable in the dotted box is 2m or 4m cable
* 1. The cable in the dotted box is 2m or 4m cable
Related Documents of Rotary
■Driver of Rotary
The applicable driver supports dual pulse and pulse + direction control. For the mounting dimensions and 3D download, reference can be made to C-DR42A
. Compared with C-DR42A, the applicable driver has the same external dimensions, but comes with an additional dual-pulse control function.
The applicable driver supports dual pulse and pulse + direction control. For the mounting dimensions and 3D download, reference can be made to C-DR42A
. Compared with C-DR42A, the applicable driver has the same external dimensions, but comes with an additional dual-pulse control function.
Precautions of Rotary
■ Positioning Rotary operating environment
Operating environment: 10~50℃, 20~70% RH (without condensation)
Recommended operating environment: 22±5℃, 20~70%RH (without condensation)
Please avoid using this positioning Rotary in the following environments
① Dusty environment (especially metal powder)
② Environment with direct sunlight and thermal radiation
③ Environment near fire sources
④ Environment containing corrosive gases and flammable gases
⑤ Environment with splashing water and oil
⑥ Environment with strong vibration and impact⑦ Environment containing organic solutions and salt
■Positioning stage maintenance of Rotary
A uniform maintenance standard is not available, and the maintenance method is subject to the type of grease and operating environment. Based on the driving conditions and guide types, make sure to check the grease once a month.
Operating environment: 10~50℃, 20~70% RH (without condensation)
Recommended operating environment: 22±5℃, 20~70%RH (without condensation)
Please avoid using this positioning Rotary in the following environments
① Dusty environment (especially metal powder)
② Environment with direct sunlight and thermal radiation
③ Environment near fire sources
④ Environment containing corrosive gases and flammable gases
⑤ Environment with splashing water and oil
⑥ Environment with strong vibration and impact⑦ Environment containing organic solutions and salt
■Positioning stage maintenance of Rotary
A uniform maintenance standard is not available, and the maintenance method is subject to the type of grease and operating environment. Based on the driving conditions and guide types, make sure to check the grease once a month.
Application Industries of Rotary
| Rotary : Electronics/Home Appliance | Rotary : Automotive | Rotary : Medical | ||
 |  |  | ||
| Rotary : Smart Phones | Rotary : Semiconductor | Rotary : Lithium battery | ||
 |  |  |
Related Products of Rotary
| Economy series X-Axis Motorized Positioning Rotary | Economy series XY-Axis Motorized Positioning Rotary | Economy series Z-Axis Motorized Positioning Rotary |
 |  |  |
| Representative model of Rotary: C-XMBS420-L-A-2 | Representative model of Rotary: C-XYMBS420-L-A-2 | Representative model of Rotary: C-ZMBS420-L-A-2 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-RMBG40-A-2 |
| E-RMBG40-A-4 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Table O.D. (Ø) | Motor, Motor Characteristics | Type | Load Capacity (Range) (N) | Material | Table Feeding Method | Guide | Minimum Resolution (Angle) (deg) | Surface Treatment | Through Hole (Table Center Hole) | Load Capacity (N) | Max. Speed (mm/sec) | Table Parallelism (µm) | Part Number | Driver | Cable |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 2,711.30 | 1 Piece(s) | Available | 13 Day(s) | 40 | 2-Phase Stepping Motor - Standard | Motorized Rotary Stage | 30.1~50 | Aluminum(Aluminum Alloy) | Ball Screw | Assembly Angular Ball Bearing | 0.0136 | Black Anodize | Provided | 39.2 | 28 | 50 or less | E-RMBG40 | B | 2 | |
MYR 2,769.76 | 1 Piece(s) | Available | 13 Day(s) | 40 | 2-Phase Stepping Motor - Standard | Motorized Rotary Stage | 30.1~50 | Aluminum(Aluminum Alloy) | Ball Screw | Assembly Angular Ball Bearing | 0.0136 | Black Anodize | Provided | 39.2 | 28 | 50 or less | E-RMBG40 | B | 4 |
Loading...
■Specification Table
■ Universal Specifications
■Timing Diagram
t1＜0.1 us t2≥0.9 us t3≥10 us
t4: ENA (Enable Signal) t4 should be at least 10 μs ahead of DIR, and it is determined as high. Generally, ENA+ and ENA- are recommended to be suspended.
Dimensional Drawing
Specification Table
 | Part Number ( Type· ) | - |  Driver | - |  Cable | |
| E-RMBG40 | - | A | - | 2 |
■Specification Table
| Part Number | Driver | Cable | Mechanical Specification | Accuracy Specification | Sensor | ||||||||
| Type | No. | Stage Surface (mm) | Travel Distance (°) | Load Capacity (N) | Weight (kg) | Maximum Speed (°/sec) | One-Way Positioning Accuracy | Repetitive Positioning Accuracy | Parallelism | Limit Sensor | Origin Sensor (ORG1) | ||
| (μm) | |||||||||||||
| E-RMBG | 40 | A | 2 (2m Cable) 4 (4m Cable) | φ40 | ±12.3 | 39.2 | 0.5 | 28 | Within 0.08° | Within ±0.01° | Within 50 | Provided | Provided |
| 60 | φ59 | ±12 | 58.8 | 0.7 | 24 | ||||||||
| 80 | φ80 | ±12 | 78.4 | 1.4 | 16 | ||||||||
| 100 | φ100 | ±12.5 | 98 | 1.8 | 12 | ||||||||
| 120 | φ120 | ±12 | 117.6 | 2.3 | 12 | ||||||||
■ Universal Specifications
| No. | 40 | 60 | 80 | 100 | 120 | |
| Feed Screw | Ball Screw Φ6, Lead 1mm | |||||
| Bearing | Angular contact ball bearing | |||||
| Motor | Type | 2-Phase Standard Stepper Motor 1.3A/Phase | 2-Phase High Torque Stepper Motor 1.3A/Phase | |||
| Step Angle | 1.8° | |||||
| Resolution (Pulse) Full | ≒0.0136° | ≒0.0119° | ≒0.0080° | ≒0.0064° | ≒0.0052° | |
| Driver | Power Voltage | DC12～50V | ||||
| Output Current | 0.1～2.2A | |||||
| Pulse Signal Voltage | 5～24V | |||||
| Subdivision | 200~51200 | |||||
| Connector | Part Number | HR10A-10R-12P (HIROSE) | ||||
| Receiving Side Part Number | HR10A-10P-12S (HIROSE) | |||||
| Sensor Substrate | Limit Sensor | Provided | ||||
| Origin Sensor | Provided | |||||
| Power Voltage | DC24V±10% | |||||
| Sensor Type | Photomicro Sensor EE-SX4320 (OMRON) | |||||
| Control Output | NPN Open Collector Output | |||||
| Output Logic | When detecting (shading): output transistor OFF (non-conductive) | |||||
■ Connector Pin Configuration
■ Wiring Diagram
■Timing Diagram
t1＜0.1 us t2≥0.9 us t3≥10 us
t4: ENA (Enable Signal) t4 should be at least 10 μs ahead of DIR, and it is determined as high. Generally, ENA+ and ENA- are recommended to be suspended.
Specification/Dimensions
-
Table O.D.(Ø)
-
Motor, Motor Characteristics
- 2-Phase Stepping Motor - Standard
-
Type
- Motorized Rotary Stage
-
Material
- Aluminum(Aluminum Alloy)
-
Table Feeding Method
- Worm Gear
- Ball Screw
-
Guide
- Assembly Angular Ball Bearing
-
Minimum Resolution (Angle)(deg)
-
Surface Treatment
- Black Anodize
-
Through Hole (Table Center Hole)
- Provided
-
Load Capacity(N)
-
Part Number
-
Driver
- B
-
Cable
- 2
- 4
-
type
- E-DR42B
- E-RMBG
-
Load Capacity (Range)(N)
- 30.1~50
- 50.1~100
- 100.1~
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
- 38 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can MISUMI motorized positioning stage be used directly after the purchase? What other accessories are needed for the actual drive?
- Answer: In addition to purchasing MISUMI automatic positioning stage (including the motor driver and 2m cable), the customer also needs to prepare 24V power supply and control unit by himself.
- Question: Why does my positioning stage only run in one direction?
-
Answer:
1. Maybe the directional signal is too weak, or the wiring is reversed, or the signal voltage is too high causing burnout of the internal current limiting resistor.
2. The pulse mode does not match. The signal mode must be consistent with the driver settings, otherwise the positioning stage will not rotate or will only run in one direction. - Question: What is the accuracy of the stepper motor? Is it cumulative?
- Answer: Generally, the accuracy of the stepper motor is 3 to 5% of the step angle. The single step deviation of the stepper motor will not affect the accuracy of the next step, so the accuracy of the stepper motor is not accumulated.
- Question: What is the allowable exterior temperature of the stepper motor?
- Answer: Too high temperature of the stepper motor will first demagnetize the magnetic material of the motor, resulting in torque decrease or even loss. Therefore, the maximum allowable temperature of the motor exterior should depend on the demagnetization point of different motor magnetic materials. Generally speaking, the demagnetization point of magnetic materials is above 130℃, so it is completely normal for the exterior temperature of the stepper motor to be around 80℃.
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy