(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Heavy Load Caster Swivel (E-CPSJ150-U)
- Volume Discount
Part Number
Configured Part Number is shown.
E-CPSJ150-U
Product Overview of Casters
Casters Material: Urethane (Brownish Red)
MISUMI economy series heavy load caster, a cost-effective choice!
Dimensional Drawing of Casters
■Material Table of Casters
| Body | Casters Part | Wheel Core | Bearing | |||
| Material of Casters | Surface Treatment | Material (Color) | Material | Surface Treatment | Rotating Part | Wheel Part |
| Q235 | Zinc Plating | Urethane (Brownish Red) | Q195 | Zinc Plating | Provided | Provided |
Specifications Overview of Casters
| Part Number | Casters Material | Mounting Height H | B | E | t | Allowable Load (daN) | |
| Type of Casters | D | ||||||
| E-CPSJ | 100 | U (Urethane) | 142 | 40 | 39.5 | 4 | 280 |
| 125 | 165 | 45 | 39.5 | 4 | 380 | ||
| 150 | 192 | 45 | 39.5 | 4 | 400 | ||
For more information on product specifications and dimensional drawings, please refer to the product catalog on the website.Product Features of Casters
■Body material is Q235, and surface treatment is zinc plating. Bearings are provided at the turning part and wheel part of the caster.
■ Advantages of MISUMI economy series Casters.
·MISUMI economy series casters are strictly tested in accordance with ANSI ICWM-2018 standard, and the loads are clearly indicated for more assured use.
■Test results under the same allowable load
Example Use of Casters
Precautions of Casters
【Precautions 1】
Do not exceed the allowable load when using it.
The allowable load in the product catalog is the load speed when manual transportation is carried on a flat ground.
【Precautions 2】Operating Speed
Use intermittently at a speed below the walking speed on a flat road. Please do not use it continuously through power traction or in a hot state
| Casters diameter | Operating Speed |
| 75mm or less | 2km/h or less |
| 100mm or less | 4km/h or less |
【Precautions 3】Stopper
Wear and damage caused by long-term use may unconsciously reduce the function of the stopper, so please pay attention.
Generally speaking, braking force varies with Casters material.
Considering the safety of products, please take other measures (wheel stopper, braking part) when especially necessary.
【Precautions 4】Operating Environment
Casters are usually used in the room temperature range.
Do not use in special environment affected by high temperature, low temperature, humidity, acid, alkali, salt, solvent, oil, sea water, medicine, etc.
【Precautions 5】Installation Method
① Please keep the mounting surface as balanced as possible.
② When mounting rotary (universal) Casters, the rotary axis should be in a vertical position.
③ When mounting fixed casters, keep the Casters parallel to each other.
④ Please confirm the mounting hole and mount it reliably with appropriate bolts and nuts to avoid looseness.
⑤ When mounting screw-in casters, please tighten the hexagonal part of threads with proper torque. If the tightening torque is too large, it will lead to stress concentration in the shaft and cause fracture.
(Refer to the appropriate tightening torque of 20 to 50N・m with a thread diameter of 12mm)
Related Products of Casters
| Recommended product of Casters 1 | Recommended product of Casters 2 | Recommended product of Casters 3 |
| Economy Series Cylindrical Locks Normal Type | Economy Series Leveling Mounts Metal Universal Type | Casters With Leveling Mounts Swivel Type |
 |  |  |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-CPSJ150-U |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Mounting Height H (mm) | Wheel Dia. D (Ø) | Allowable Load (daN) | Wheel Width B (mm) | B Dimension (mm) | D Dimension (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 97.82 | 2 Piece(s) | Available | 13 Day(s) | 192 | 250 | 400 | 45 | 45 | 250 |
Loading...
| Part Number | Wheel Material | Mounting Height H | B | E | t | Allowable Load (daN) | |
| Type | D | ||||||
| E-CPSJ | 100 | U (Urethane) | 142 | 40 | 39.5 | 4 | 280 |
| 125 | 165 | 45 | 39.5 | 4 | 380 | ||
| 150 | 192 | 45 | 39.5 | 4 | 400 | ||
For more information on product specifications and dimensional drawings, please refer to the product catalog on the website.Basic Information
| Caster Type | Swivel Type | Load Range(daN) | 320.01~485.00 | Stopper (Detail) | Not Provided |
|---|---|---|---|---|---|
| Wheel Material | Polyurethane | Fitting Material | Steel | Plate Length(mm) | 114 |
| Plate Width(mm) | 100 | Load Category | Ultra Heavy Load | Color | Brownish Red |
Please check the type/dimensions/specifications of the part E-CPSJ150-U in the Heavy Load Caster Swivel series.
Specification/Dimensions
-
type
- E-CPSJ
-
Mounting Height H(mm)
-
Wheel Dia. D(Ø)
-
Allowable Load(daN)
-
Wheel Width B(mm)
-
B Dimension(mm)
- 40
- 45
-
D Dimension(mm)
- 100
- 125
- 250
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can these economy series casters be used in special environments such as high temperatures?
- Answer: The economy series casters cannot be used in special environments such as high temperatures, and can only be used within the room temperature range. Do not use in special environment affected by high temperature, low temperature, humidity, acid, alkali, salt, solvent, oil, sea water, medicine, etc.
- Question: Can the economy series casters be used for machine traction?
- Answer: The economy series casters cannot be used for machine traction. Please use intermittently at a speed below the walking speed on a flat road. Please do not use continuously through power traction or in a hot state.
Products like this...
| Part Number |
|---|
| E-CPSJ100-U |
| E-CPSJ125-U |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Mounting Height H (mm) | Wheel Dia. D (Ø) | Allowable Load (daN) | Wheel Width B (mm) | B Dimension (mm) | D Dimension (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 66.38 | 2 Piece(s) | Available | 13 Day(s) | 142 | 100 | 280 | 40 | 40 | 100 | |
MYR 72.46 | 2 Piece(s) | Available | 13 Day(s) | 165 | 125 | 380 | 45 | 45 | 125 |
Additional Products in this Category
- HG-S Free Wheel Plate Type (with Stopper)
- Standard Press Casters - Medium Load (Swivel Type with Stopper)
- Low Floor Caster for Heavy Loads HK
- Press Caster (Free Wheel) S Type
- Dual Wheel Caster N100
- Free Wheels with Heavy Load Polyurethane Rubber Wheel Stopper (RJMB Type)
- Screw-type Caster EA986PT-131
- Caster (Two Wheels With Brake) Wheel Diameter × Width: 50 × 45.5 mm. Mounting Height: 58 mm EA986TG-17
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy