(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Indexing Plungers Standard, Fine Thread (E-LSXPAS10)
Click this image to zoom it.
Move the mouse over the image to zoom
Part Number
Configured Part Number is shown.
E-LSXPAS10
·This series is MISUMI indexing plunger (economy series), which is also called indexing pin, spring draw pin, etc.
·Indexing plunger, also called indexing pin, spring draw pin, etc., is a locating pin that can be inserted and extracted manually.
·Due to the structural characteristics and design purpose of the indexing plunger, the main part under force is the pin head, which can be subjected to shear loads and bending loads.
The internal connecting rod and handle part can only be subjected to tension along the axial direction, not subjected to radial force, i.e., not to be pulled out obliquely, not pressing down and lifting up the handle when pulled out horizontally.
| Part Number | Thread Pitch (Fine) | B | S | D | L | L1 | L2 | L3 | L4 | SW1 | SW2 | Load (N) | ||
| Type | M | |||||||||||||
| min. | max. | |||||||||||||
| (Reset type) E-LPXAS E-LPXKS E-LSXPAS E-LSXPKS | 10 | 1 | 5 | 5 | 21 | 45 | 17 | 5 | 15 | 5 | 12 | 16 | 8 | 15 |
| 12 | 1.5 | 6 | 6 | 25 | 54 | 20 | 6 | 17 | 6 | 14 | 19 | 10.5 | 17 | |
| 16 | 1.5 | 8 | 8 | 31 | 69 | 26 | 8 | 23 | 8 | 19 | 24 | 15 | 23 | |
| (Self-locking type) E-LPXYAS E-LPXYKS E-LSXYAS E-LSXYKS | 10 | l | 5 | 5 | 21 | 51 | 17 | 5 | 15 | 5 | 12 | 16 | 9.5 | 18.5 |
| 12 | 1.5 | 6 | 6 | 25 | 61 | 20 | 6 | 17 | 6 | 14 | 19 | 11 | 21.5 | |
| 16 | 1.5 | 8 | 7 | 31 | 75.5 | 26 | 8 | 23 | 8 | 19 | 24 | 16.5 | 30.5 | |
Material Specification
| Thread | Type | Knob | Body | Pin | Spring | Nut | |||||
| Reset Type | Self-Locking Type |  Material | Material |  Surface Treatment | Material | Surface Treatment |  Hardness | Material | Material | Surface Treatment | |
| Fine Thread | E-LPXAS | E-LPXYAS | PA6 Plastics | 1215 | Black Oxide | S45C | Black Oxide | 45~55HRC | SUS304 | - | - |
| E-LPXKS | E-LPXYKS | S35C | Black Oxide | ||||||||
| E-LSXPAS | E-LSXYAS | SUS303 | - | SUS303 | - | - | - | ||||
| E-LSXPKS | E-LSXYKS | SUS303 | - | ||||||||
·The indexing plunger can be flexibly installed: Suitable for linear motion and rotary motion mechanisms with positioning requirements, the plunger can be installed using general threads, which facilitates assembly and disassembly.Suitable for fixture indexing, positioning, stop limit and other occasions.
•Reset type
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the front end is rotated by 90° while maintaining the pull-out state, the retraction state of the front end can be locked.
4. To release the locked state, simply rotate 90° while maintaining the pulled-out state.
5. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.
| Part Number |
|---|
| E-LSXPAS10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Screw Dia. M (mm) | Tip Outer Dia. B (Ø) | Stroke (S) (mm) | Locking Mechanism | Body Material | Length L (mm) | Pin Material | Pin Surface Treatment | Main Body Surface Treatment | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 21.40 | 1 Piece(s) | Available | 9 Day(s) | 10 | 5 | 5 | [Returning] Reset Type | [Stainless Steel] Stainless Steel | 45 | [Stainless Steel] Stainless Steel | Not Provided | Not Provided | Without Locknut |
Loading...
Basic Information
| Type | Standard Type | Mounting Method | Screw-In | Overall Length | Standard |
|---|---|---|---|---|---|
| All Stainless | Not Compliant | Tip Heat Treatment | Not Provided | Knob | Provided |
Please check the type/dimensions/specifications of the part E-LSXPAS10 in the Indexing Plungers Standard, Fine Thread series.
Specification/Dimensions
-
type
- E-LPXAS
- E-LPXKS
- E-LPXYAS
- E-LPXYKS
- E-LSXPAS
- E-LSXPKS
- E-LSXYAS
- E-LSXYKS
-
Screw Dia. M(mm)
-
Tip Outer Dia. B(Ø)
-
Stroke (S)(mm)
-
Locking Mechanism
- Nose Lock
- Returning
- Nose Lock
-
Body Material
- Steel
- Stainless Steel
- Steel
-
Length L(mm)
-
Pin Material
- S45C
- Stainless Steel
-
Pin Surface Treatment
- Not Provided
- Black Oxide
-
Main Body Surface Treatment
- Not Provided
- Black Oxide
-
Accessories
- With Locknut
- Without Locknut
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Why is there still shaking when positioning with a indexing plunger, is it a product defect?
- Answer: Hello, first of all, the product itself has a certain tolerance range, allowing a certain amount of shaking. Product defect is only suspected if the shaking exceeds the indicated tolerance. Secondly, since the positioning holes and threaded mounting holes matching the indexing plunger are subject to some machining error, always pay attention when designing.
- Question: Why is the rod inside the indexing plunger broken/bent?
- Answer: Hello, the main stress point of the indexing plunger/indexing pin is the head part of the pin, and the middle internal connecting rod and the tail knob can only be subjected to pulling force, but not to excessive radial force. Please refer to the precautions in the product information. Always move in the axial direction during the pull-out process.
- Question: What is the meaning of load min and max?
- Answer: The min. load represents the initial load, and the max. load represents the load at the maximum press-in limit of ball head.
Products like this...
| Part Number |
|---|
| E-LPXKS10 |
| E-LPXKS12 |
| E-LPXKS16 |
| E-LSXPAS12 |
| E-LSXPAS16 |
| E-LSXPKS10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Screw Dia. M (mm) | Tip Outer Dia. B (Ø) | Stroke (S) (mm) | Locking Mechanism | Body Material | Length L (mm) | Pin Material | Pin Surface Treatment | Main Body Surface Treatment | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 18.04 | 1 Piece(s) | Available | 9 Day(s) | 10 | 5 | 5 | [Returning] Reset Type | [Steel] Steel | 45 | S45C | Black Oxide | Black Oxide | With Locknut | |
MYR 22.00 | 1 Piece(s) | Available | 9 Day(s) | 12 | 6 | 6 | [Returning] Reset Type | [Steel] Steel | 54 | S45C | Black Oxide | Black Oxide | With Locknut | |
MYR 32.22 | 1 Piece(s) | Available | 9 Day(s) | 16 | 8 | 8 | [Returning] Reset Type | [Steel] Steel | 66 | S45C | Black Oxide | Black Oxide | With Locknut | |
MYR 25.20 | 1 Piece(s) | Available | 9 Day(s) | 12 | 6 | 6 | [Returning] Reset Type | [Stainless Steel] Stainless Steel | 54 | [Stainless Steel] Stainless Steel | Not Provided | Not Provided | Without Locknut | |
MYR 39.20 | 1 Piece(s) | Available | 9 Day(s) | 16 | 8 | 8 | [Returning] Reset Type | [Stainless Steel] Stainless Steel | 66 | [Stainless Steel] Stainless Steel | Not Provided | Not Provided | Without Locknut | |
MYR 22.46 | 1 Piece(s) | Available | 9 Day(s) | 10 | 5 | 5 | [Returning] Reset Type | [Stainless Steel] Stainless Steel | 45 | [Stainless Steel] Stainless Steel | Not Provided | Not Provided | With Locknut |
Additional Products in this Category
- Indexing Plungers-Fine Thread Type/Switch Lever
- Indexing Plungers-Fine Thread Lever
- Indexing Plungers-Press Fit
- Index Plungers Compact Body, Stainless Steel
- Index Plungers Lever Type, Coarse Thread
- Engineering Plastic Index Plunger (Nose-Lock Type)
- Indexing Plungers Simple Type IP
- Index Plunger (Long Stroke, Nose-Lock Type)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy