(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Cantilever Shafts Standard, Retaining Ring Groove
Part Number
Configured Part Number is shown.
- Download
Product Details - CAD Data unavailable
Product Overview
The cantilever pin can be used as the pivot point of rotary parts such as idlers. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.
Dimensional Drawing
Specifications Overview
| Type | D[Φ:mm] |  Equivalent Material |  Surface Treatment | |
| Thread Length Fixed | Thread Length Configurable | |||
| E-FXAA | E-FXNAA | 4~15 | General structural steel or carbon steel | Ferroferric Oxide Protective Film |
| E-PFXAA | E-PFXNAA | Electroless Nickel Plating | ||
| E-SFXAA | E-SFXNAA | Austenitic stainless steel | － | |
| E-HFXAA | － | Tempered steel hardness HRC30～ | Ferroferric Oxide Protective Film | |
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.HFXAA is only applicable to D6, 8 and 10.Specification Table
| Part Number |  Dg7 | 1mm increments | H | W | M | d | m | n | |||||
 Type | No. |  Y |  F |  N | (Coarse Thread) | Reference Dimension | Tolerance | ||||||
| Thread Length Selectable E-FXAA E-PFXAA E-SFXAA E-HFXAA (D≥6) Thread Length Configurable E-FXNAA E-PFXNAA E-SFXNAA | 3 | 3 | -0.003 -0.012 | 2~30 | 3~50 | 3～ 6 | 7 | 5 | M 3 | 2 | ＋ 0.060 0 | 0.5 | 2 |
| 3A | 11 | 9 | |||||||||||
| 4 | 4 | -0.004 -0.016 | 4～ 8 | 8 | 6 | M 4 | 3 | 0.7 | |||||
| 4A | 12 | 10 | |||||||||||
| 5 | 5 | 5~10 | 9 | 7 | M 5 | 4 | ＋ 0.075 0 | ||||||
| 5A | 13 | 11 | |||||||||||
| 6 | 6 | 2~60 | 5~100 | 6~12 | 10 | 8 | M 6 | 5 | |||||
| 6A | 14 | 12 | |||||||||||
| 8 | 8 | -0.005 -0.020 | 8~16 | 12 | 10 | M 8 | 7 | ＋ 0.090 0 | 0.9 | 3 | |||
| 8A | 16 | 14 | |||||||||||
| 10 | 10 | 10~20 | 15 | 13 | M10 | 9.6 | 0 -0.09 | 1.15 | |||||
| 10A | 20 | 17 | |||||||||||
| 12 | 12 | -0.006 -0.024 | 10~150 | 12~24 | 17 | 14 | M12 | 11.5 | 0 -0.11 | 4 | |||
| 15 | 15 | 20 | 17 | 14.3 | |||||||||
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.The dimension of wrench flats is 15 when Y≥17.N is available for Thread Length Configurable Type only.HFXAA is only applicable to D6, 8 and 10.Product Features
Feature 1: It has a tolerance of g7 and is used in conjunction with idlers, pulleys, sprockets, etc.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.
Precautions
①Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③This product has no accessory retaining ring. If you need a retaining ring, please select the alteration SET.
④The shapes, specifications and materials of matching retaining rings are as follows.
■Retaining ring shapes:
No.3~No.8(D=3~8): E-shaped retaining ring
No.10~No.15(D=10~15):C-shaped retaining ring
■Retaining ring specification: JIS nominal specifications For details, refer to
Retaining Ring Specifications
■Retaining ring materials:
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③This product has no accessory retaining ring. If you need a retaining ring, please select the alteration SET.
④The shapes, specifications and materials of matching retaining rings are as follows.
■Retaining ring shapes:
No.3~No.8(D=3~8): E-shaped retaining ring
No.10~No.15(D=10~15):C-shaped retaining ring
■Retaining ring specification: JIS nominal specifications For details, refer to
Retaining Ring Specifications■Retaining ring materials:
| Cantilever Pin | Retaining Ring | ||
| Corresponding Material | Surface Treatment | Material | |
| General structural steel or carbon steel | Ferroferric Oxide Protective Film | Spring Steel | |
| Electroless Nickel Plating | SUS394—CSP | ||
| Austenitic stainless steel | - | ||
| SCM435 | Ferroferric Oxide Protective Film | Spring Steel | |
| Electroless Nickel Plating | SUS394—CSP | ||
Example of Use
Application Industries
| Electronic & Electrical | Automotive | Lithium battery | ||
 |  |  | ||
| Robotics | Smart Phones | Semiconductor | ||
 |  |  |
Related Products
| Idlers Belt Backside Tensioning Type | Timing Pulleys T10 | Economy series Toothed Timing Belts | ||
 |  |  | ||
| Representative model: AFBD9-20 | Representative model: TTPA22T10150-A-P24 | Representative model: C-HTBN400S2M-40 | ||
| Advantages: stable quality, short delivery time, multiple specifications. | Advantages: industry standard, short delivery time, multiple types. | Advantages: rich variety of specifications, high cost performance. |
Related Documents
For anti-rust performance and maintenance of metal materials and surface treatment, refer to Anti-Rust Performance
For applicable tightening torque for the bolts, refer toBolt Torque
For strength of bolt, refer toBolt Strength
Anti-Rust PerformanceFor applicable tightening torque for the bolts, refer to
Bolt TorqueFor strength of bolt, refer to
Bolt Strength| Part Number |
|---|
| E-FXAA3-[2-30/1]-F[3-50/1] |
| E-FXAA3A-[2-30/1]-F[3-50/1] |
| E-FXAA4-[2-30/1]-F[3-50/1] |
| E-FXAA4A-[2-30/1]-F[3-50/1] |
| E-FXAA5-[2-30/1]-F[3-50/1] |
| E-FXAA5A-[2-30/1]-F[3-50/1] |
| E-FXAA6-[2-60/1]-F[5-100/1] |
| E-FXAA6A-[2-60/1]-F[5-100/1] |
| E-FXAA8-[2-60/1]-F[5-100/1] |
| E-FXAA8A-[2-60/1]-F[5-100/1] |
| E-FXAA10-[2-60/1]-F[5-100/1] |
| E-FXAA10A-[2-60/1]-F[5-100/1] |
| E-FXAA12-[2-60/1]-F[10-150/1] |
| E-FXAA15-[2-60/1]-F[10-150/1] |
| E-FXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-FXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-FXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-FXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-FXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-FXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-FXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-FXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-FXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-FXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-FXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1] |
| E-FXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1] |
| E-FXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1] |
| E-FXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1] |
| E-HFXAA6-[2-60/1]-F[5-100/1] |
| E-HFXAA6A-[2-60/1]-F[5-100/1] |
| E-HFXAA8-[2-60/1]-F[5-100/1] |
| E-HFXAA8A-[2-60/1]-F[5-100/1] |
| E-HFXAA10-[2-60/1]-F[5-100/1] |
| E-HFXAA10A-[2-60/1]-F[5-100/1] |
| E-PFXAA3-[2-30/1]-F[3-50/1] |
| E-PFXAA3A-[2-30/1]-F[3-50/1] |
| E-PFXAA4-[2-30/1]-F[3-50/1] |
| E-PFXAA4A-[2-30/1]-F[3-50/1] |
| E-PFXAA5-[2-30/1]-F[3-50/1] |
| E-PFXAA5A-[2-30/1]-F[3-50/1] |
| E-PFXAA6-[2-60/1]-F[5-100/1] |
| E-PFXAA6A-[2-60/1]-F[5-100/1] |
| E-PFXAA8-[2-60/1]-F[5-100/1] |
| E-PFXAA8A-[2-60/1]-F[5-100/1] |
| E-PFXAA10-[2-60/1]-F[5-100/1] |
| E-PFXAA10A-[2-60/1]-F[5-100/1] |
| E-PFXAA12-[2-60/1]-F[10-150/1] |
| E-PFXAA15-[2-60/1]-F[10-150/1] |
| E-PFXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-PFXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-PFXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-PFXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-PFXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-PFXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-PFXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-PFXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-PFXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-PFXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-PFXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1] |
| E-PFXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Diameter (mm) (mm) | Material | Surface Treatment | Hardness | Thread Length N (mm) | Material | Thread Length Ordering Code | M (Coarse) | H Dimension (mm) | Thread Length N (mm) | Shaft Shoulder Dimension | F (mm) | Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 7 | 4.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 11 | 4.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 8 | 6 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 12 | 6 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 9 | 7.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 13 | 7.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 20 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 7 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 11 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 8 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 12 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 9 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 13 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 10 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 14 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 12 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 16 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 15 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 20 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Black Oxide | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 17 | - | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Black Oxide | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 20 | - | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 6 | 10 | 9 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 6 | 14 | 9 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 8 | 12 | 12 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 8 | 16 | 12 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 10 | 15 | 15 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 10 | 20 | 15 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 7 | 4.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 11 | 4.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 8 | 6 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 12 | 6 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 9 | 7.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 13 | 7.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 20 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 7 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 11 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 8 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 12 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 9 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 13 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 10 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 14 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 12 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 16 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 15 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 20 | - | Widened | 5 ～ 100 | 2 ～ 60 |
Loading...
Basic Information
| Shaft Retaining Method | Threaded (Lock Nut) | Retainer Shape | Wrench Flats | Bearing Retaining Method | With Retaining Ring Grooves |
|---|
Specification/Dimensions
-
Shaft Diameter (mm)(mm)
-
Material
- Steel
- Stainless Steel
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Hardness
- Hardness Spec-designed
- Hardness Not Spec-designed
-
Thread Length N(mm)
-
Material
- Tempered steel hardness HRC30～
- Austenitic stainless steel
- General structural steel or carbon steel
-
Thread Length Ordering Code
- Thread Length Configurable
- Thread Length Selectable
-
M (Coarse)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
-
H Dimension(mm)
-
Thread Length N(mm)
- 4.5
- 6
- 7.5
- 9
- 12
- 15
- 18
-
Shaft Shoulder Dimension
- Standard
- Widened
-
F(mm)
-
Y(mm)
-
type
- E-FXAA
- E-FXNAA
- E-HFXAA
- E-PFXAA
- E-PFXNAA
- E-SFXAA
- E-SFXNAA
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
- Cantilever Shafts - Threaded with Threaded Ends - Stepped
- Cantilever Shafts - Piloted Thread with Retaining Ring Groove - Standard
- Cantilever Shafts - Piloted Thread with Threaded Ends - Standard
- Cantilever Shafts - Piloted Thread with Threaded Ends - Stepped
- Cantilever Shafts - Screw Mount with Threaded End - Standard
- Cantilever Shafts - Screw Mount with Retaining Ring Groove - Stepped
- Cantilever Shaft Screw Mount, Retaining Ring Groove
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy