(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Pivot Pins Shouldered, Lock Nut

Pivot Pins Shouldered, Lock Nut

Click this image to zoom it.

  • Pivot Pins Shouldered, Lock Nut
  • Pivot Pins Shouldered, Lock Nut
  • Pivot Pins Shouldered, Lock Nut
  • Pivot Pins Shouldered, Lock Nut

Part Number

Configured Part Number is shown.

Product Overview
The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.
Dimensional Drawing
Pivot Pins Shouldered, Lock Nut, Dimensional Drawing
This type may have centering holes depending on dimensions.
The dimension of the relief groove on the shoulder and neck is a reference value.
For L Dimension, common cutting and machining tolerances (medium class) are used.
E-CLBGN, E-CLBGNU, E-PCLBGN and E-PCLBGNU have identification grooves on the side in order to distinguish them from the hardened type.
Specifications Overview
・Material Table
Type Equivalent Material Hardness Surface Treatment Accessory (1 pcs)
L Dimension ConfigurableStandard NutU-Nut
Standard NutU-Nut
E-CLBGNE-CLBGNUGeneral Structural Steel or Carbon Steel
L Dimension Fixed
General Structural Steel or Carbon Steel
-Ferroferric Oxide Protective Film SWRCH SS400
(UNUTK)
E-CLBGHNE-CLBGHNUHRC40~
E-PCLBGNE-PCLBGNU-Electroless Nickel Plating Austenitic stainless steel Austenitic stainless steel
(UNUTS)
E-PCLBGHNE-PCLBGHNUHRC40~
E-GCLBGN-Plating hardness 750HV~Hard Chrome Plated SWRCH SS400
(UNUTK)
E-SCLBGNE-SCLBGNUAustenitic stainless steel-- Austenitic stainless steel Austenitic stainless steel
(UNUTS)
E-SCLBGHNE-SCLBGHNUMartensitic stainless steelHRC45~
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.
For U-Nut specifications, clickU-Nut
Specification Table
Part NumberLABTFu(n)M
(Coarse Thread)
Attached Nut
TypeDL Dimension Selection
(0.1mm increments)
L Dimension Configurable
Standard Nut

E-CLBGN
E-CLBGHN
E-PCLBGN
E-PCLBGHN
E-GCLBGN
E-SCLBGN
E-SCLBGHN

U-Nut
E-CLBGNU
E-CLBGHNU
E-PCLBGNU
E-PCLBGHNU
E-SCLBGNU
E-SCLBGHNU
45.0~50.075363.91.5M3M3×0.5
55.0~60.09744.9M4M4×0.7
610.0~100.0108595.8M5M5×0.8
813107.8M6M6×1.0
101613129.8M8M8×1.25
1215.0~150.018141611.8M10M10×1.5
1320.0~150.024211812.8M12M12×1.75
1413.8
1514.8
1620.0~150.015.8
1716.8
182417.8
20272319.8M16M16×2.0
2221.8
25302724.8
3040.0~150.035323029
E-SCLBGHN and E-SCLBGHNU may be discolored due to hardening.
Precision Standard
D Tolerance (g7)
4~6-0.004
-0.016
8~10-0.005
-0.020
12~18-0.006
-0.024
20~30-0.007
-0.028
Product Features
Feature 1: It has a tolerance of g7 and is used in conjunction with bearings.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered retaining ring type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.
Feature 5: The L Dimension Fixed type is available at a relatively low price.
Precautions
①Dg7 tolerance is limited to the L dimension range. Others are general tolerances.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
 Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 1 nut, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.
Example of Use
Pivot Pins Shouldered, Lock Nut, Complete Specifications, Low Price, High Precision
Application Industries
Electronic & Electrical Automotive Lithium battery
Pivot Pins Shouldered, Lock Nut, Complete Specifications, Low Price, High Precision Pivot Pins Shouldered, Lock Nut, Direct-from-Manufacturer, Low Price, Short Delivery Time Pivot Pins Shouldered, Lock Nut, Complete Specifications, Low Price, High Precision
Robotics Smart Phones Semiconductor
Pivot Pins Shouldered, Lock Nut, Widely Used in Many Industries Pivot Pins Shouldered, Lock Nut, Direct-from-Manufacturer, Low Price, Short Delivery Time Pivot Pins Shouldered, Lock Nut, Complete Specifications, Low Price, High Precision
Related Products
Adjustment Screw Components Hex Socket on Head Single Bearing Type with Retaining Ring Embedded Packed Gasket Ring Fixed/Gasket Ring
Pivot Pins Shouldered, Lock Nut, Widely Used in Many Industries Pivot Pins Shouldered, Lock Nut, Material Table, Specification Table Pivot Pins Shouldered, Lock Nut, Material Table HINGE
Representative model: ANB8-40 Representative model: BGRR6000ZZ Representative model: PCIMR6-12-0.1
Advantages: manual adjustment and positioning, optional length Advantages: full range, high precision Advantages: full range, high precision and high quality
Related Documents
For anti-rust performance and maintenance of metal materials and surface treatment, refer to
For U-Nut specifications, refer to
Anti-Rust Performance
U-Nut

Part Number
E-SCLBGHN4-[5-50/0.1]
E-SCLBGHN5-[5-60/0.1]
E-SCLBGHN6-[10-100/0.1]
E-SCLBGHN8-[10-100/0.1]
E-SCLBGHN10-[10-100/0.1]
E-SCLBGHN12-[15-150/0.1]
E-SCLBGHN13-[25-150/0.1]
E-SCLBGHN14-[20-150/0.1]
E-SCLBGHN15-[25-150/0.1]
E-SCLBGHN16-[30-150/0.1]
E-SCLBGHN17-[20-150/0.1]
E-SCLBGHN18-[20-150/0.1]
E-SCLBGHN20-[30-150/0.1]
E-SCLBGHN22-[20-150/0.1]
E-SCLBGHN25-[20-150/0.1]
E-SCLBGHN30-[40-200/0.1]
E-SCLBGHNU5-[5-60/0.1]
E-SCLBGHNU6-[10-100/0.1]
E-SCLBGHNU8-[10-100/0.1]
E-SCLBGHNU10-[10-100/0.1]
E-SCLBGHNU12-[15-150/0.1]
E-SCLBGHNU13
E-SCLBGHNU14-[20-150/0.1]
E-SCLBGHNU15-[20-150/0.1]
E-SCLBGHNU16-[20-150/0.1]
E-SCLBGHNU17-[20-150/0.1]
E-SCLBGHNU18-[20-150/0.1]
E-SCLBGHNU20-[20-150/0.1]
E-SCLBGHNU22-[20-150/0.1]
E-SCLBGHNU25-[20-150/0.1]
E-SCLBGHNU30
E-SCLBGN4-[5-50/0.1]
E-SCLBGN5-[5-60/0.1]
E-SCLBGN6-[10-100/0.1]
E-SCLBGN8-[10-100/0.1]
E-SCLBGN10-[10-100/0.1]
E-SCLBGN12-[15-150/0.1]
E-SCLBGN13
E-SCLBGN14-[20-150/0.1]
E-SCLBGN15-[25-150/0.1]
E-SCLBGN16-[30-150/0.1]
E-SCLBGN17-[20-150/0.1]
E-SCLBGN18-[20-150/0.1]
E-SCLBGN20-[30-150/0.1]
E-SCLBGN22-[20-150/0.1]
E-SCLBGN25-[20-150/0.1]
E-SCLBGNU5-[5-60/0.1]
E-SCLBGNU6-[10-100/0.1]
E-SCLBGNU8-[10-100/0.1]
E-SCLBGNU10-[10-100/0.1]
E-SCLBGNU12-[15-150/0.1]
E-SCLBGNU13
E-SCLBGNU14-[20-150/0.1]
E-SCLBGNU15-[20-150/0.1]
E-SCLBGNU16-[20-150/0.1]
E-SCLBGNU17-[20-150/0.1]
E-SCLBGNU18-[20-150/0.1]
E-SCLBGNU20-[20-150/0.1]
E-SCLBGNU22-[20-150/0.1]
E-SCLBGNU25-[20-150/0.1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipShaft Dia. D
(mm)
Material Hardness Surface Treatment Material Detail Accessories L Dimension Tolerance
(mm)

-

1 Piece(s) 7 Day(s) 4Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut5 ~ 50

-

1 Piece(s) 7 Day(s) 5Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut5 ~ 60

-

1 Piece(s) 7 Day(s) 6Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 8Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 10Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 12Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut15 ~ 150

-

1 Piece(s) 7 Day(s) 13Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut25 ~ 150

-

1 Piece(s) 7 Day(s) 14Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 15Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut25 ~ 150

-

1 Piece(s) 7 Day(s) 16Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut30 ~ 150

-

1 Piece(s) 7 Day(s) 17Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 18Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 20Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut30 ~ 150

-

1 Piece(s) 7 Day(s) 22Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 25Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 30Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelStandard Nut40 ~ 200

-

1 Piece(s) 7 Day(s) 5Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut5 ~ 60

-

1 Piece(s) 7 Day(s) 6Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 8Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 10Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 12Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut15 ~ 150

MYR 129.60

1 Piece(s)Available 7 Day(s) 13Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut-

-

1 Piece(s) 7 Day(s) 14Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 15Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 16Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 17Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 18Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 20Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 22Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 25Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut20 ~ 150

MYR 282.80

1 Piece(s)Available 7 Day(s) 30Stainless SteelHardness RequirementNot ProvidedMartensite stainless steelU-Nut-

-

1 Piece(s) 7 Day(s) 4Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut5 ~ 50

-

1 Piece(s) 7 Day(s) 5Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut5 ~ 60

-

1 Piece(s) 7 Day(s) 6Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 8Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 10Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 12Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut15 ~ 150

MYR 78.02

1 Piece(s)Available 7 Day(s) 13Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut-

-

1 Piece(s) 7 Day(s) 14Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 15Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut25 ~ 150

-

1 Piece(s) 7 Day(s) 16Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut30 ~ 150

-

1 Piece(s) 7 Day(s) 17Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 18Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 20Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut30 ~ 150

-

1 Piece(s) 7 Day(s) 22Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 25Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelStandard Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 5Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut5 ~ 60

-

1 Piece(s) 7 Day(s) 6Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 8Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 10Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut10 ~ 100

-

1 Piece(s) 7 Day(s) 12Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut15 ~ 150

MYR 104.30

1 Piece(s)Available 7 Day(s) 13Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut-

-

1 Piece(s) 7 Day(s) 14Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 15Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 16Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 17Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 18Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 20Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 22Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150

-

1 Piece(s) 7 Day(s) 25Stainless SteelNot Spec-designedNot ProvidedAustenitic stainless steelU-Nut20 ~ 150
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipShaft Dia. D
(mm)
Material Hardness Surface Treatment Material Detail Accessories L Dimension Tolerance
(mm)

Loading...

  1. 1

Basic Information

Mounting Method Nut (Threaded) Basic Shape Shouldered D Tolerance Selection g7
Type L configurable Hex Socket Not Provided

Additional Products in this Category

Tech Support

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time