(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Compression Spring - O.D. Referenced Stainless Steel, Light Load [RoHS Compliant] (E-GUTT10-15)

Compression Spring - O.D. Referenced Stainless Steel, Light Load [RoHS Compliant] E-GUTT10-15

Move the mouse over the image to zoom

  • Compression Spring - O.D. Referenced Stainless Steel, Light Load [RoHS Compliant]
  • Compression Spring - O.D. Referenced Stainless Steel, Light Load [RoHS Compliant]
  • Compression Spring - O.D. Referenced Stainless Steel, Light Load [RoHS Compliant]
  • Volume Discount

\RoHS10-compliant products are newly released.

(i)Caution

  • This product can be purchased in quantities of 10pcs. Please enter your order quantity in multiples of 10. * Minimum order quantity (10 pcs. or more)
  • Since it is an O.D. referenced type spring, it is manufactured with priority given to O.D. tolerances. Please be careful.
  • Stainless Steel Spring is magnetic.

Part Number

Configured Part Number is shown.

E-GUTT10-15

Configured Specifications

Free Length L(mm)15Inner Dia. D-2d (or D)(Ø)8.3
Outer Dia. D (or D1)(Ø)10Height with the max. load applied ([Free Length] – [Allowable Deflection])(mm)9
Spring Constant(N/mm)2Allowable Load (Configurable Range)(N)8.51~16.00
Max. Load(N)11.8MaterialSUS304-WPB
Wire Dia.(Ø)0.85Solid Length(mm)5.1
Cleaning MethodNo CleaningTypeRound Wire
Show More
Environmentally friendlyRoHS Compliant (10 Substances)Allowable Displacement(mm)6
End Face StateWith GrindingMaximum Height when Loaded (Free Length, Allowable Deflection)(mm)9
I.D. D (⌀)(φ)8.3Total Coils Nt *Reference Value5
Material Certificate: Materials-RoHS10
Show Less

Product Overview

[Product Comparison Information]
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an O.D. referenced type spring, it is manufactured with priority given to O.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
ItemMISUMI's Similar ProductsEconomy Series
Service Life1 million times700,000 Times
ManufacturedOutside of JapanOutside of Japan
Dimensional Drawing
Dimensional Drawing
Closed Ends (Both Ends Not Ground*) Closed Ends (Both Ends Ground) 0 -0.5 mm 0 -0.8 mm
O.D. Dø10 or Less  Free Length L±1 mm
 ø12 or More  Spring Constant±10%
[M]Material SUS304-WPB
Specification Table
Ordering Example Part Number
E-GUTT5-15
■E-GUL: Fmax. (allowable deflection) = L × 40%
Part NumberdSolid Length
(Reference Value)
F
max.
N (kgf)
max.
Fa%
TypeD-L
E-GUL2-5*0.201.6520.98{0.1}40
10*0.265.0741.96{0.2}
15*62.94{0.3}
3-5*0.302.0022{0.2}
10*0.353.7043.9{0.4}
15*0.406.6065.9{0.6}
20*87.8{0.8}
25*0.4511.70109.8{1.0}
30*1211.8{1.2}
4-5*0.352.1022{0.2}
10*0.455.3043.9{0.4}
15*65.9{0.6}
20*0.508.0087.8{0.8}
25*109.8{1.0}
30*0.5512.701211.8{1.2}
40 0.6019.801615.7{1.6}
5-5*0.402.2022{0.2}
10*0.504.7543.9{0.4}
15*65.9{0.6}
20*0.556.8887.8{0.8}
25*109.8{1.0}
30 0.6514.951211.8{1.2}
40 1615.7{1.6}
6-5*0.452.3022{0.2}
10*0.554.4043.9{0.4}
15*65.9{0.6}
20 0.658.5087.8{0.8}
25 109.8{1.0}
30 0.7012.601211.8{1.2}
35 1413.7{1.4}
8-10 0.654.6043.9{0.4}
15 0.758.3065.9{0.6}
20 87.8{0.8}
25 109.8{1.0}
30 0.8010.401211.8{1.2}
35 1413.7{1.4}
40 1615.7{1.6}
10-10 0.754.7043.9{0.4}
15 0.806.2065.9{0.6}
20 87.8{0.8}
25 0.909.50109.8{1.0}
30 1211.8{1.2}
35 1413.7{1.4}
50 1.0015.502019.6{2.0}
12-15 0.906.7565.9{0.6}
20 1.0010.0087.8{0.8}
25 109.8{1.0}
13-20 1.008.2587.8{0.8}
30 1.1012.101211.8{1.2}
40 1615.7{1.6}
16-15 1.107.7065.9{0.6}
25 1.2010.80109.8{1.0}
20-30 1.7012.801235.3{3.6}
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] O.D. Referenced Type is outer diameter prioritized.
·How to Determine the Number of Winding (Reference Value): Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.
■E-GUTT: Fmax. (allowable deflection) = L × Fa%
Part NumberdSolid Length
(Reference Value)
F
max.
N (kgf)
max.
Fa%
TypeD-L
E-GUTT 3-5*0.352.8022.9{0.3}40
10*0.404.8045.9{0.6}
15*0.458.3068.8{0.9}
20*68.8{0.9}30
4-5*0.402.6022.9{0.3}40
10*0.453.9045.9{0.6}
15*0.506.0068.8{0.9}
20*0.559.40811.8{1.2}
30 0.6014.401014.7{1.5}33
5-5*0.452.6022.9{0.3}40
10*0.503.6045.9{0.6}
15 0.607.5068.8{0.9}
20 811.8{1.2}
25 0.6510.701014.7{1.5}
30 0.7015.401217.7{1.8}
6-5*0.502.4023.9{0.4}
10 0.604.2047.8{0.8}
15 0.707.40611.8{1.2}
20 815.7{1.6}
25 0.8013.601019.6{2.0}
30 1223.5{2.4}
35 0.8517.501427.5{2.8}
45 0.9023.401835.3{3.6}
8-10 0.755.3047.8{0.8}
15 611.8{1.2}
20 0.9010.40815.7{1.6}
25 1019.6{2.0}
30 1.0017.001223.5{2.4}
35 1427.5{2.8}
40 1631.4{3.2}
10-10 0.855.1047.8{0.8}
15 611.8{1.2}
20 1.009.50815.7{1.6}
25 1019.6{2.0}
30 1.1014.301223.5{2.4}
35 1427.5{2.8}
13-15 1.005.75611.8{1.2}
20 1.2010.50815.7{1.6}
25 1019.6{2.0}
30 1.3015.001223.5{2.4}
35 1427.5{2.8}
40 1.4020.301631.4{3.2}
16-15 1.207.20611.8{1.2}
20 1.309.10815.7{1.6}
25 1019.6{2.0}
30 1.4012.301223.5{2.4}
35 1.5016.501427.5{2.8}
kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] O.D. Referenced Type is outer diameter prioritized.
·How to Determine the Number of Winding (Reference Value): Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.
■Spring Constant (N/mm) [kgf/mm]
O.D.
D
O.D. Referenced
E-GUVE-GUYE-GURE-GUFE-GULE-GUTTE-GUME-GUHE-GUBB
2 0.05
{0.005}
0.20
{0.02}
0.30
{0.03}
0.50
{0.05}
    
30.05
{0.005}
0.098
{0.010}
0.29
{0.03}
0.49
{0.05}
0.98
{0.1}
1.5
{0.15}
   
42.0
{0.2}
2.9
{0.3}
4.9
{0.5}
52.0
{0.2}
62.9
{0.3}
5.9
{0.6}
9.8
{1.0}
8
10 0.200
{0.020}
12     
13    2.0
{0.2}
2.9
{0.3}
9.8
{1.0}
19.6
{2.0}
16   0.49
{0.05}
 
20   0.98
{0.10}
2.90
{0.3}
 4.9
{0.5}
14.7
{1.5}
29.4
{3.0}
Fmax.F =
L × 70%
F =
L × Fa%
F =
L × Fa%
F =
L × 45%
F =
L × 40%
F =
L × Fa%
F =
L × 35%
F =
L × 30%
F =
L × 25%
I.D.
D
I.D. Referenced
E-GVURE-GVUFE-GVULE-GVUM
50.29
{0.03}
0.49
{0.05}
0.98
{0.10}
2.94
{0.30}
6
8
10
12 
16  
Fmax.F=
L × 60%
F=
L × 45%
F=
L × 40%
F=
L × 35%
Related Products

Part Number 

Loading...
Part Number
E-GUTT10-15
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSFree Length L
(mm)
Inner Dia. D-2d (or D)
(Ø)
Outer Dia. D (or D1)
(Ø)
Height with the max. load applied ([Free Length] – [Allowable Deflection])
(mm)
Spring Constant
(N/mm)
Allowable Load (Configurable Range)
(N)
Max. Load
(N)
Wire Dia.
(Ø)
Solid Length
(mm)
Allowable Displacement
(mm)
End Face State Maximum Height when Loaded (Free Length, Allowable Deflection)
(mm)
I.D. D (⌀)
(φ)
Total Coils Nt *Reference Value Material Certificate: Materials

MYR 4.18

10 Piece(s)Available 4 Day(s) or more 10158.310928.51~16.0011.80.855.16With Grinding98.35-
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSFree Length L
(mm)
Inner Dia. D-2d (or D)
(Ø)
Outer Dia. D (or D1)
(Ø)
Height with the max. load applied ([Free Length] – [Allowable Deflection])
(mm)
Spring Constant
(N/mm)
Allowable Load (Configurable Range)
(N)
Max. Load
(N)
Wire Dia.
(Ø)
Solid Length
(mm)
Allowable Displacement
(mm)
End Face State Maximum Height when Loaded (Free Length, Allowable Deflection)
(mm)
I.D. D (⌀)
(φ)
Total Coils Nt *Reference Value Material Certificate: Materials
  1. 1

Note

Cautions on Use
Operating Temperature
Stainless Steel:: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
Stainless Steel Spring is magnetic.

Basic Information

Material SUS304-WPB Cleaning Method No Cleaning Type Round Wire
Environmentally friendly RoHS Compliant (10 Substances)

Please check the type/dimensions/specifications of the part E-GUTT10-15 in the Compression Spring - O.D. Referenced Stainless Steel, Light Load [RoHS Compliant] series.

Products like this...

Part Number
E-GUL10-25
E-GUL10-30
E-GUL10-35
E-GUTT10-20
E-GUTT10-25
E-GUTT10-30
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSFree Length L
(mm)
Inner Dia. D-2d (or D)
(Ø)
Outer Dia. D (or D1)
(Ø)
Height with the max. load applied ([Free Length] – [Allowable Deflection])
(mm)
Spring Constant
(N/mm)
Allowable Load (Configurable Range)
(N)
Max. Load
(N)
Wire Dia.
(Ø)
Solid Length
(mm)
Allowable Displacement
(mm)
End Face State Maximum Height when Loaded (Free Length, Allowable Deflection)
(mm)
I.D. D (⌀)
(φ)
Total Coils Nt *Reference Value Material Certificate: Materials

MYR 3.14

10 Piece(s)Available 4 Day(s) or more 10258.210150.988.51~16.009.80.99.510With Grinding158.29.5-

MYR 3.14

10 Piece(s)Available 4 Day(s) or more 10308.210180.988.51~16.0011.80.99.512With Grinding188.29.5-

MYR 3.14

10 Piece(s)Available 4 Day(s) or more 10358.210210.988.51~16.0013.70.99.514With Grinding218.29.5-

MYR 4.18

10 Piece(s)Available 4 Day(s) or more 10208101228.51~16.0015.719.58With Grinding1288.5-

MYR 4.18

10 Piece(s)Available 4 Day(s) or more 102581015216.01~30.0019.619.510With Grinding1588.5-

MYR 4.18

10 Piece(s)Available 4 Day(s) or more 10307.81018216.01~30.0023.51.114.312With Grinding187.812-
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSFree Length L
(mm)
Inner Dia. D-2d (or D)
(Ø)
Outer Dia. D (or D1)
(Ø)
Height with the max. load applied ([Free Length] – [Allowable Deflection])
(mm)
Spring Constant
(N/mm)
Allowable Load (Configurable Range)
(N)
Max. Load
(N)
Wire Dia.
(Ø)
Solid Length
(mm)
Allowable Displacement
(mm)
End Face State Maximum Height when Loaded (Free Length, Allowable Deflection)
(mm)
I.D. D (⌀)
(φ)
Total Coils Nt *Reference Value Material Certificate: Materials

Additional Products in this Category

Tech Support

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time