(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Timing Pulleys Keyless/High Torque/S8M
Part Number
Configured Part Number is shown.
Product Overview
Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Dimensional Drawing
The shaft bore may not have surface treatment.Bushings are available in Standard Type (ST Bushing) and Short Type (SH Bushing). Refer to Detailed Specifications of BushingsSpecifications Overview
| Part Number |  Material |  Surface Treatment | |||||||
| Belt Width 15mm | Belt Width 25mm | Belt Width 30mm | Belt Width 40mm | Pulley | Flange | Bushing | Pulley | Flange | Bushing |
| A: 17 W: 22 | A: 28 W: 33 | A: 33 W: 38 | A: 44 W: 49 | ||||||
| E-HTLA□□S8M150 | E-HTLA□□S8M250 | E-HTLA□□S8M300 | E-HTLA□□S8M400 | Aluminum Alloy 7A09 | Aluminum Alloy | Equivalent to S45C | Clear Anodized | - | |
| E-HTPL□□S8M150 | E-HTPL□□S8M250 | E-HTPL□□S8M300 | E-HTPL□□S8M400 | Equivalent to S45C | SPCC | Equivalent to S45C | Ferroferric Oxide Protective Film | ||
| E-HTLG□□S8M150 | E-HTLG□□S8M250 | E-HTLG□□S8M300 | E-HTLG□□S8M400 | Electroless Nickel Plating | |||||
Film hardness of hard clear anodize is 300HV~.If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.Specification Table
| Part Number |  PulleyShape |  dH7 range (select Shaft Bore Dia. according to Table 1) | P.D. | O.D. | F | E | |||||||||
| S8M150 | S8M250 | S8M300 | S8M400 | ||||||||||||
 Type |  Number of Teeth |  Type & Nominal Width | Shape E (ST Bushing) | Shape F (SH Bushing) | Shape E (ST Bushing) | Shape F (ST Bushing) (SH Bushing) | Shape E (ST Bushing) | Shape F (ST Bushing) (SH Bushing) | Shape E (ST Bushing) | Shape F (ST Bushing) | |||||
| E-HTLA E-HTPL E-HTLG | 18 | S8M150 ＊A：17 ＊W：22 S8M250 ＊A：28 ＊W：33 S8M300 ＊A：33 ＊W：38 S8M400 ＊A：44 ＊W：49 | E F | 12 | - | 12 | 12 | - | - | - | - | 45.84 | 44.46 | 52 | 36 |
| 19 | 12・14・15 | 12 | 12・14・15 | 12・14・15 | 15 | 15 | - | - | 48.38 | 47.01 | 55 | 40 | |||
| 20 | 12~17 | 12 | 12~17 | 12・14・15 | 15・16・17 | 15 | - | - | 50.93 | 49.56 | 58 | ||||
| 21 | 12~17 | 12 | 12~17 | 12~17 | 15・16・17 | 15・16・17 | 16・17 | 16・17 | 53.48 | 52.1 | 61 | 45 | |||
| 22 | 12~17 | 12 | 12~17 | 12~17 | 15・16・17 | 15・16・17 | 16・17 | 16・17 | 56.02 | 54.65 | |||||
| 24 | 12~17 | 12 | 12~17 | 12~17 | 15・16・17 | 15・16・17 | 16・17 | 16・17 | 61.12 | 59.74 | 67 | 50 | |||
| 25 | 12~25 | 12 | 12~25 | 12~25 | 15~25 | 15~25 | 16~25 | 16~25 | 63.66 | 62.29 | 70 | 56 | |||
| 26 | 14~25 | - | 14~25 | 14~25 | 15~25 | 15~25 | 16~25 | 16~25 | 66.21 | 64.84 | 74 | 58 | |||
| 28 | 14~25 | 14~25 | 14~25 | 15~25 | 15~25 | 16~25 | 16~25 | 71.3 | 69.93 | 80 | 60 | ||||
| 30 | 14~32 | 14~32 | 14~32 | 15~32 | 15~32 | 16~32 | 16~32 | 76.39 | 75.02 | 87 | 67 | ||||
| 32 | 14~32 | 14~32 | 14~32 | 15~32 | 15~32 | 16~32 | 16~32 | 81.49 | 80.12 | ||||||
| 34 | 16~35 | 16~35 | 16~35 | 16~35 | 16~35 | 16~35 | 16~35 | 86.58 | 85.21 | 95 | 75 | ||||
| 36 | 16~38 | 16~38 | 16~35 | 16~38 | 16~35 | 16~38 | 16~38 | 91.67 | 90.3 | 99 | 80 | ||||
| 38 | 16~42 | 16~42 | 16~35 | 16~42 | 16~35 | 16~42 | 16~42 | 96.77 | 95.39 | 104 | 84 | ||||
| 40 | 20~42 | 20~42 | 20~35 | 20~42 | 20~35 | 20~42 | 20~42 | 101.86 | 100.49 | 111 | 90 | ||||
| 44 | 20~42 | 20~42 | 20~35 | 20~42 | 20~35 | 20~42 | 20~42 | 112.05 | 110.67 | 119 | 100 | ||||
| 48 | 20~42 | 20~42 | 20~35 | 20~42 | 20~35 | 20~42 | 20~42 | 122.23 | 120.86 | 127 | 105 | ||||
| 50 | 20~50 | - | 20~50 | 20~35 | 20~50 | 20~35 | 20~50 | 20~42 | 127.32 | 125.95 | 135 | 115 | |||
| 60 | 20~50 | 20~50 | 20~35 | 20~50 | 20~35 | 20~50 | 20~42 | 152.79 | 151.42 | 160 | 140 | ||||
Select Shaft Bore Dia. according to Table 1■Table 1: Shaft Bore Dia. Selection
| dH7 | Allowable max. torque N・m | D | (L) | ||
| ST Bushing | SH Bushing | ST Bushing | SH Bushing | ||
| 12 | 48 | 23 | 32 | 31 | 10.5 |
| 14 | 73 | - | 35 | - | 12 |
| 15 | 78 | 36 | |||
| 16 | 83 | 37 | 13 | ||
| 17 | 88 | 38 | |||
| 18 | 154 | 43 | 14 | ||
| 19 | 163 | 45 | |||
| 20 | 171 | 46 | |||
| 22 | 186 | 48 | |||
| 24 | 206 | 50 | |||
| 25 | 216 | 52 | |||
| 28 | 353 | 54 | 15.5 | ||
| 30 | 382 | 57 | |||
| 32 | 412 | 163 | 59 | 58 | 16.5 |
| 35 | 451 | 173 | 63 | 61 | |
| 38 | 686 | - | 70 | - | 19 |
| 40 | 725 | 71 | |||
| 42 | 757 | 74 | 20 | ||
| 45 | 1490 | 84 | 24.5 | ||
| 48 | 1600 | 87 | |||
| 50 | 1660 | 89 | |||
Using a bushing with electroless nickel plated surface reduces maximum allowable torque and axial load by 20%-30%.Product Features
Features of MISUMI Keyless Timing Pulleys
Feature 1: Keyless timing pulleys require no keyway machining, and round shaft and round hole can be used directly.
Urgent design changes can be made due to the reduction of cutting and machining time.
Feature 2: Keyless timing pulleys are connected with bolts only, allowing for easy installation and removal.
Equipment maintenance can be easily carried out without using a special tool. Parts are reusable, effectively reducing the cost.
Feature 3: Keyless timing pulleys enable free alignment at any position during assembly.
Alignment control is possible during assembly, thus eliminating the need to align the key and tooth in the design phase.
Feature 4: Keyless timing pulleys have no loosening. When a key is used, the keyway becomes loose, but there is no gap in the keyless bushing. It is therefore suitable for places where there are repeated forward and reverse rotations.
Long-term high coaxiality connection can be achieved. Suitable for servo motors and other places where there are repeated forward and reverse rotations.
Feature 1: Keyless timing pulleys require no keyway machining, and round shaft and round hole can be used directly.
Urgent design changes can be made due to the reduction of cutting and machining time.
Feature 2: Keyless timing pulleys are connected with bolts only, allowing for easy installation and removal.
Equipment maintenance can be easily carried out without using a special tool. Parts are reusable, effectively reducing the cost.
Feature 3: Keyless timing pulleys enable free alignment at any position during assembly.
Alignment control is possible during assembly, thus eliminating the need to align the key and tooth in the design phase.
Feature 4: Keyless timing pulleys have no loosening. When a key is used, the keyway becomes loose, but there is no gap in the keyless bushing. It is therefore suitable for places where there are repeated forward and reverse rotations.
Long-term high coaxiality connection can be achieved. Suitable for servo motors and other places where there are repeated forward and reverse rotations.
Usage Method
■Mounting method for keyless timing pulleys
①Wipe off the stains on the shaft surface and apply a layer of lubricant or grease. (Do not use any lubricant or grease that contains molybdenum abrasion inhibiting agent.)
②Also wipe the contact surface between the timing pulley and the bushing, and apply lubricant or grease. In addition, the fastening bolt thread surface and bearing surface must be applied lubricant or grease.
③Insert the timing pulley and bushing into the shaft after temporary assembly. (Do not tighten the bushing directly with the bolt without putting it through the shaft.)
④After positioning is completed, tighten the bolts gently (about 1/4 of the specified tightening torque) and diagonally in sequence with a torque wrench.
⑤Tighten with increased tightening torque (about 1/2 of the specified tightening torque).
⑥Tighten again to the specified tightening torque.
⑦Tighten the fastening bolt circumferentially in sequence.
■Disassembly method for keyless timing pulleys
①Work with the unit at a complete stop.
②Loose the fastening bolt circumferentially in sequence
③Insert the bolt into the threaded hole for disassembly and evenly screw it in.
④When reinstalling, repeat the steps in “Installation”.
①Wipe off the stains on the shaft surface and apply a layer of lubricant or grease. (Do not use any lubricant or grease that contains molybdenum abrasion inhibiting agent.)
②Also wipe the contact surface between the timing pulley and the bushing, and apply lubricant or grease. In addition, the fastening bolt thread surface and bearing surface must be applied lubricant or grease.
③Insert the timing pulley and bushing into the shaft after temporary assembly. (Do not tighten the bushing directly with the bolt without putting it through the shaft.)
④After positioning is completed, tighten the bolts gently (about 1/4 of the specified tightening torque) and diagonally in sequence with a torque wrench.
⑤Tighten with increased tightening torque (about 1/2 of the specified tightening torque).
⑥Tighten again to the specified tightening torque.
⑦Tighten the fastening bolt circumferentially in sequence.
■Disassembly method for keyless timing pulleys
①Work with the unit at a complete stop.
②Loose the fastening bolt circumferentially in sequence
③Insert the bolt into the threaded hole for disassembly and evenly screw it in.
④When reinstalling, repeat the steps in “Installation”.
Precautions
① If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.
Please refer to
surface treatment and rust prevention methods
② When installing a keyless bushing, be sure to apply lubricant or grease to the shaft surface, the contact surface between the pulley and the bushing, and the fastening bolt.
Otherwise it will not be securely tightened and may cause the shaft to idle.
③ Tighten the bolt after inserting the bushing into the shaft. (If the bolts is tightened before inserting the bushing, it will cause deformation of the bushing.)
④ Use a torque spanner to tighten the bolts.
⑤ Do not use bolts other than those supplied.
Please refer to
surface treatment and rust prevention methods② When installing a keyless bushing, be sure to apply lubricant or grease to the shaft surface, the contact surface between the pulley and the bushing, and the fastening bolt.
Otherwise it will not be securely tightened and may cause the shaft to idle.
③ Tighten the bolt after inserting the bushing into the shaft. (If the bolts is tightened before inserting the bushing, it will cause deformation of the bushing.)
④ Use a torque spanner to tighten the bolts.
⑤ Do not use bolts other than those supplied.
Example of Use
■Mechanism name
Dustproof Lifting Machine
■Mechanism function
Lifting machine for heavy workpieces
Use in dusty places
■Function of Keyless Timing Pulleys
Rotates ball screws by means of a keyless toothed timing belt, lifting and lowering the positioning stage
For details, please click Dustproof Lifting Machine
Dustproof Lifting Machine
■Mechanism function
Lifting machine for heavy workpieces
Use in dusty places
■Function of Keyless Timing Pulleys
Rotates ball screws by means of a keyless toothed timing belt, lifting and lowering the positioning stage
For details, please click Dustproof Lifting Machine
Application Industries
| Smart Phones | Medical | Electronic & Electrical | ||
 |  |  | ||
| Automotive | Robotics | Lithium battery | ||
 |  |  |
Related Products
| Flat-belt idlers, Width (T), 6 to 32 mm | Flat Belts For General Use | High Torque Timing Pulleys S2M Type | ||
 |  |  | ||
| Representative model: HBG15-6 | Representative model: HBLT350-4.23 | Representative model: HTPA48S2M040-B-N10 | ||
| Advantages: short delivery time, multiple types | Advantage: custom size | Advantages: short delivery time, multiple types |
Related Documents
Technical Data of Toothed Timing Belts and Timing Pulleys
①Data on the selection of timing pulleys and timing toothed belts, tensioning force, etc. (drive).
②Data on the selection of timing pulleys and timing toothed belts, tensioning force, etc. (transmission & conveyance).
③Main causes and countermeasures for the damage, breakage, abnormal noise of toothed timing belts.
④Reference data on the replacement time of toothed timing belts.
⑤Data on dimensional tolerance of timing pulleys.
①Data on the selection of timing pulleys and timing toothed belts, tensioning force, etc. (drive).
②Data on the selection of timing pulleys and timing toothed belts, tensioning force, etc. (transmission & conveyance).
③Main causes and countermeasures for the damage, breakage, abnormal noise of toothed timing belts.
④Reference data on the replacement time of toothed timing belts.
⑤Data on dimensional tolerance of timing pulleys.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-HTLA18S8M150-E-12 |
| E-HTLA18S8M250-E-12 |
| E-HTLA18S8M250-F-12 |
| E-HTLA19S8M150-E-[12,14,15] |
| E-HTLA19S8M150-F-12 |
| E-HTLA19S8M250-E-[12,14,15] |
| E-HTLA19S8M250-F-[12,14,15] |
| E-HTLA19S8M300-E-15 |
| E-HTLA19S8M300-F-15 |
| E-HTLA20S8M150-E-[12,14,15,16,17] |
| E-HTLA20S8M150-F-12 |
| E-HTLA20S8M250-E-[12,14,15,16,17] |
| E-HTLA20S8M250-F-[12,14,15] |
| E-HTLA20S8M300-E-[15,16,17] |
| E-HTLA20S8M300-F-15 |
| E-HTLA21S8M150-E-[12,14,15,16,17] |
| E-HTLA21S8M150-F-12 |
| E-HTLA21S8M250-E-[12,14,15,16,17] |
| E-HTLA21S8M250-F-[12,14,15,16,17] |
| E-HTLA21S8M300-E-[15,16,17] |
| E-HTLA21S8M300-F-[15,16,17] |
| E-HTLA21S8M400-E-[16,17] |
| E-HTLA21S8M400-F-[16,17] |
| E-HTLA22S8M150-E-[12,14,15,16,17] |
| E-HTLA22S8M150-F-12 |
| E-HTLA22S8M250-E-[12,14,15,16,17] |
| E-HTLA22S8M250-F-[12,14,15,16,17] |
| E-HTLA22S8M300-E-[15,16,17] |
| E-HTLA22S8M300-F-[15,16,17] |
| E-HTLA22S8M400-E-[16,17] |
| E-HTLA22S8M400-F-[16,17] |
| E-HTLA24S8M150-E-[12,14,15,16,17] |
| E-HTLA24S8M150-F-12 |
| E-HTLA24S8M250-E-[12,14,15,16,17] |
| E-HTLA24S8M250-F-[12,14,15,16,17] |
| E-HTLA24S8M300-E-[15,16,17] |
| E-HTLA24S8M300-F-[15,16,17] |
| E-HTLA24S8M400-E-[16,17] |
| E-HTLA24S8M400-F-[16,17] |
| E-HTLA25S8M150-E-[12,14,15,16,17,18,19,20,22,24,25] |
| E-HTLA25S8M150-F-12 |
| E-HTLA25S8M250-E-[12,14,15,16,17,18,19,20,22,24,25] |
| E-HTLA25S8M250-F-[12,14,15,16,17,18,19,20,22,24,25] |
| E-HTLA25S8M300-E-[15,16,17,18,19,20,22,24,25] |
| E-HTLA25S8M300-F-[15,16,17,18,19,20,22,24,25] |
| E-HTLA25S8M400-E-[16,17,18,19,20,22,24,25] |
| E-HTLA25S8M400-F-[16,17,18,19,20,22,24,25] |
| E-HTLA26S8M150-E-[14,15,16,17,18,19,20,22,24,25] |
| E-HTLA26S8M250-E-[14,15,16,17,18,19,20,22,24,25] |
| E-HTLA26S8M250-F-[14,15,16,17,18,19,20,22,24,25] |
| E-HTLA26S8M300-E-[15,16,17,18,19,20,22,24,25] |
| E-HTLA26S8M300-F-[15,16,17,18,19,20,22,24,25] |
| E-HTLA26S8M400-E-[16,17,18,19,20,22,24,25] |
| E-HTLA26S8M400-F-[16,17,18,19,20,22,24,25] |
| E-HTLA28S8M150-E-[14,15,16,17,18,19,20,22,24,25] |
| E-HTLA28S8M250-E-[14,15,16,17,18,19,20,22,24,25] |
| E-HTLA28S8M250-F-[14,15,16,17,18,19,20,22,24,25] |
| E-HTLA28S8M300-E-[15,16,17,18,19,20,22,24,25] |
| E-HTLA28S8M300-F-[15,16,17,18,19,20,22,24,25] |
| E-HTLA28S8M400-E-[16,17,18,19,20,22,24,25] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Belt Width Used (mm) | Pulley Shape | Material | Surface Treatment | Number of Teeth | Shaft Bore Dia. [d] (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 18 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 18 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 18 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 19 | 12 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 19 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 19 | 12 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 19 | 12 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 19 | 15 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 19 | 15 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 20 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 20 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 20 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 20 | 12 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 20 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 20 | 15 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 16 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 21 | 16 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 16 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 22 | 16 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 12 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 15 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 16 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 24 | 16 ～ 17 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 12 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 12 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 12 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 12 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 15 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 15 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 16 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 25 | 16 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 14 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 14 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 14 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 15 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 15 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 16 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 26 | 16 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 28 | 14 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 28 | 14 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 28 | 14 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 28 | 15 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 30 | Shape F | [Aluminum] Aluminum Alloy | Clear Anodize | 28 | 15 ～ 25 | ||
- | 1 Piece(s) | 7 Day(s) | 40 | Shape E | [Aluminum] Aluminum Alloy | Clear Anodize | 28 | 16 ～ 25 |
Loading...
Basic Information
| Type | Keyless Bushings | Belt Type | S8M |
|---|
Specification/Dimensions
-
Belt Width Used(mm)
-
Pulley Shape
- Shape E
- Shape F
-
Material
- Steel
- Aluminum
- Steel
-
Surface Treatment
- Black Oxide Coating
- Clear Anodize
- Electroless Nickel Plating
-
Number of Teeth
-
Shaft Bore Dia. [d](mm)
-
type
- E-HTLA□□S8M
- E-HTLG□□S8M
- E-HTPL□□S8M
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy