(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information. 
  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

MR Extension Hooded Connector

MR Extension Hooded Connector

Click this image to zoom it.

Move the mouse over the image to zoom

  • MR Extension Hooded Connector
  • MR Extension Hooded Connector
  • MR Extension Hooded Connector

MR Hood for Relaying


● It can be used to relay with connector with straight hood or vertical and horizontal combined hood.
● It is compatible with both the screw lock and one-touch lock.
● It can be used in common with the male (pin) and female (socket) of the MR connector. 

· It cannot be used for purposes other than relaying.
· It does not allow coupling between relay hoods.
· This product is not waterproof.
· Select the used wire upon checking the cable extraction port size.
· Use with the fixing bracket (MR-R4+)
.

PDF

Japanese Only

Specifications

 MR Extension Hooded Connector:Related Image

ModelNumber of CoresTypeWeight
(g)
MR-8LK2+8Hood for
Relay
11.3
MR-16LK2+1612.0
MR-20LK2+2012.0
MR-25LK2+2514.6
MR-34LK2+3416.0
MR-50LK2+5021.0
Sales: Misumi / Manufacturer: Honda Tsushin Kogyo Co., LTD.

More Information

MR Extension Hooded Connector:Related Image
Part Number
MR-8LK2+
MR-16LK2+
MR-20LK2+
MR-25LK2+
MR-34LK2+
MR-50LK2+
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSNumber of Pins Number of cores
(Core)

MYR 40.41

1 Piece(s) 4 Day(s) or more 1088

MYR 27.62

1 Piece(s) 4 Day(s) or more 101616

MYR 27.07

1 Piece(s) 4 Day(s) or more 102020

MYR 36.18

1 Piece(s) 4 Day(s) or more 102525

MYR 40.71

1 Piece(s) 4 Day(s) or more 103434

MYR 33.64

1 Piece(s) 4 Day(s) or more 105050

Loading...

  1. 1

Material / Finish

Item Materials Finish
Insulator Diallyl Phthalate Resin Blue
Male Contact Brass Silver Plating
Female Contact Phosphor Bronze Silver Plating
Hood ABS Resin Gray
Spring-lock Stainless Steel -
Fixing Bracket Zinc Die-cast Zinc Uni-chrome Plated

Connector x Hood Combination Table

Hood
Connector
Straight For Vertical and Horizontal Dual-use Straight Relay
MR- * L+ MR- * LW+ MR- * LK2+
Male
Female

Hood x Hood Combination Chart

Hood Straight For Vertical and Horizontal Dual-use Straight Relay
MR- * L+ MR- * LW+ MR- * LK2+
Straight MR- * L+ x x
For Vertical and Horizontal Dual-use MR- * LW+ x x
Straight Relay MR- * LK2+ x

・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.

Contact Arrangement ◆Male (Pin)

* Female (socket) would have the right and left reversed. (View from the connector cable connection side.)

Compatible Wire

AWG mm2
Size 28 ~ 24 0.08 ~ 0.2

(Please make sure that the finished OD of the cable is equal to or smaller than the cable clamp ID of the hood)

Electrical Properties

Item Characteristics Conditions
Rated Current 3 A or less Allowable current of single contact after coupling
Rated Voltage 300 VAC or less Allowable voltage within operating temperature range
Contact Resistance 5 mΩ or less Measured at 1 ADC
Insulation Resistance 1,000 MΩ or more Measured at 500 VDC
Withstand Voltage 1,000 VAC No insulation breakdown after 1 min of application
Operating Temperature Range -40°C ~ +105°C -

Mechanical Properties

Item Characteristics Conditions
Extraction Force Per Single Core Insertion Force: 300 g or less, Extraction Force: 50 g or more 0.6±0.01 measured with flat steel gauge
Vibration Resistance No cracks or looseness after testing Tested at 1.5 mm Amplitude, 10 Hz ~ 55 Hz Vibration Frequency, Acceleration Speed of 15 G
Impact Resistance No abnormalities or cracks in any parts Tested at Acceleration Speed of 50 G
Insertion and Removal Durability Contact resistance is 10 mΩ /1 ADC Measured after being inserted/extracted 1,000 times

Environmental Properties

Item Characteristics Conditions
Temperature Resistance No abnormalities or cracks in any parts Measured after being tested at -55°C ~ +85°C
Humidity Resistance 1,000 MΩ Insulation Resistance / 500 VDC,
Withstand Voltage 1,000 VAC / min
Measured at 90 ~ 95% Humidity, 96 H Duration and 40°C Temperature
Corrosion Resistance With no significant corrosion and 10 mΩ / 1 ADC or less contact resistance Measured after being tested in 5% salt water for 48 hours

Basic Information

Connector Shape Square shape Connector series initials M/N/O M/N/O MR
Protection function (environmentally resistant) None

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)