(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
NCS Straight/Relay/Panel Mountable Connector Harness
A harness with an NCS connector from NANABOSHI ELECTRIC MFG CO., LTD. Cables for power supply applications and general-purpose applications can be selected. The lineup includes oil resistant and flexible cables.
- For Power Supply
- For Signal
- Connection between Boards
- Sensor
- Nickel-Plated
- Gold Plated
- MISUMI Original
● Ideal for relay cables thanks to its superior strength.
● Oil-resistant / soft cables are available.
● By taking advantage of the free alteration / custom number, customization of connection changes, mark tube printing, and sheath strip lengths is possible.
● Supports cable shapes other than those described with "WEB Design Harness Plus."
· Straight plugs cannot be mated with one another. Use a panel mount receptacle or a cable for relays when setting up a relay.
Wiring and Wire Color Page >>Click here
Part Number
Configured Part Number is shown.
Specifications
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Shell Size | Number of Cores | Cable | Specified Length (m) |
| CNCS (NCS Series) Nanaboshi Electric Mfg.Co,Ltd. | P (Female Straight / Cut Off) PP (Female Straight / Female Straight) PT (Female Straight / Pin No. Insertion Mark Tube) PY (Female Straight / Y Terminal) |  | 14 | 2 |  | 0.2 ~ 50 Can be specified by 0.1 m increments |
| 16 25 30 | 2 3 4 | |||||
| ADF (Female Relay / Cut Off) ADFADF (Female Relay / Female Relay) ADFT (Female Relay / Pin No. Insertion Mark Tube) ADFY (Female Relay / Y Terminal) |  | 16 | 2 3 | |||
| 25 | 2 3 4 | |||||
| 30 | ||||||
| RF (Female Panel Mount / Cut Off) RFT (Female Panel Mount / Pin No. Insertion Mark Tube) RFY (Female Panel Mount / Y Terminal) * Panel mount will be flange type. |  | 16 | 2 3 | |||
| 25 | 2 3 4 | |||||
| 30 | ||||||
| PM (Male Straight / Cut Off) PMPM (Male Straight / Male Straight) PMT (Male Straight / Pin No. Insertion Mark Tube) PMY (Male Straight / Y Terminal) |  | 16 | 2 3 | |||
| Connector | 25 | 2 3 4 | ||||
| 30 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Shell Size | Number of Cores | Cable | Specified Length (m) |
| CNCS (NCS Series) Nanaboshi Electric Mfg.Co,Ltd. | ADM (Male Relay / Cut Off) ADMADM (Male Relay / Male Relay) ADMT (Male Relay / Pin No. Insertion Mark Tube) ADMY (Male Relay / Y Terminal) |  | 16 | 2 3 | | 0.2 ~ 50 Can be specified by 0.1 m increments |
| 25 | 2 3 4 | |||||
| 30 | ||||||
| R (Male Panel Mount / Cut Off) RT (Male Panel Mount / Pin No. Insertion Mark Tube) RY (Male Panel Mount / Y Terminal) * Panel mount will be flange type. |  | 16 | 2 3 4 | |||
| 25 | ||||||
| 30 | ||||||
| Connector | PFPM (Female Straight / Male Straight) ADFPF (Female Relay / Female Straight) ADFPM (Female Relay / Male Straight) ADMPF (Male Relay / Female Straight) ADMPM (Male Relay / Male Straight) ADFADM (Female Relay / Male Relay) |  | 16 | 2 3 | ||
| 25 | 2 3 4 | |||||
| 30 | 3 4 |
| Shape Specification Type | Shell Size | Number of Cores |
| P | 14 | 2 |
| 16 | 2 | |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PP | 14 | 2 |
| 16 | 2 | |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PT | 14 | 2 |
| 16 | 2 | |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PY | 14 | 2 |
| 16 | 2 | |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| ADF | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADFADF | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADFT | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADFY | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| RF | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| RFT | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| RFY | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PMPM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PMT | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PMY | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| ADM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADMADM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADMT | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADMY | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| R | 16 | 2 |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| RT | 16 | 2 |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| RY | 16 | 2 |
| 3 | ||
| 4 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 2 | |
| 3 | ||
| 4 | ||
| PFPM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADFPF | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADFPM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADMPF | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADMPM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 | ||
| ADFADM | 16 | 2 |
| 3 | ||
| 25 | 2 | |
| 3 | ||
| 4 | ||
| 30 | 3 | |
| 4 |
| Specified Length (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
More Information
Electrical Properties
| Connector Type (Shell Size- No. of Cores) | Connector | A Cable | C Cable | |||||
| Rated Current (A or less) | Rated Voltage (V or less) | Section Area | Rated Voltage | Allowable Current A (30°C) | Section Area | Rated Voltage | Allowable Current A (30°C) | |
| 14-2 | 5 | 125 | 0.75mm2 (AWG18) | 300V | 7 | 0.75mm2 (AWG18) | 300V | 6 |
| 16-2 | ||||||||
| 16-3 | 5 | |||||||
| 16-4 | 4 | |||||||
| 25-2 | 10 | 250 | 2.0mm2 (AWG14) | 17 | 2.0mm2 (AWG14) | 15 | ||
| 25-3 | 13 | |||||||
| 25-4 | 11 | |||||||
| 30-2 | 15 | 15 | ||||||
| 30-3 | 13 | |||||||
| 30-4 | 11 | |||||||
| Part Number |
|---|
| CNCS-ADF-16-2-A-[0.2-50/0.1] |
| CNCS-ADF-16-2-C-[0.2-50/0.1] |
| CNCS-ADF-16-3-A-[0.2-50/0.1] |
| CNCS-ADF-16-3-C-[0.2-50/0.1] |
| CNCS-ADF-25-2-A-[0.2-50/0.1] |
| CNCS-ADF-25-2-C-[0.2-50/0.1] |
| CNCS-ADF-25-3-A-[0.2-50/0.1] |
| CNCS-ADF-25-3-C-[0.2-50/0.1] |
| CNCS-ADF-25-4-A-[0.2-50/0.1] |
| CNCS-ADF-25-4-C-[0.2-50/0.1] |
| CNCS-ADF-30-3-A-[0.2-50/0.1] |
| CNCS-ADF-30-3-C-[0.2-50/0.1] |
| CNCS-ADF-30-4-A-[0.2-50/0.1] |
| CNCS-ADF-30-4-C-[0.2-50/0.1] |
| CNCS-ADFPF-16-2-A-[0.2-50/0.1] |
| CNCS-ADFPF-16-2-C-[0.2-50/0.1] |
| CNCS-ADFPF-16-3-A-[0.2-50/0.1] |
| CNCS-ADFPF-16-3-C-[0.2-50/0.1] |
| CNCS-ADFPF-25-2-A-[0.2-50/0.1] |
| CNCS-ADFPF-25-2-C-[0.2-50/0.1] |
| CNCS-ADFPF-25-3-A-[0.2-50/0.1] |
| CNCS-ADFPF-25-3-C-[0.2-50/0.1] |
| CNCS-ADFPF-25-4-A-[0.2-50/0.1] |
| CNCS-ADFPF-25-4-C-[0.2-50/0.1] |
| CNCS-ADFPF-30-3-A-[0.2-50/0.1] |
| CNCS-ADFPF-30-3-C-[0.2-50/0.1] |
| CNCS-ADFPF-30-4-A-[0.2-50/0.1] |
| CNCS-ADFPF-30-4-C-[0.2-50/0.1] |
| CNCS-ADFPM-16-2-A-[0.2-50/0.1] |
| CNCS-ADFPM-16-2-C-[0.2-50/0.1] |
| CNCS-ADFPM-16-3-A-[0.2-50/0.1] |
| CNCS-ADFPM-16-3-C-[0.2-50/0.1] |
| CNCS-ADFPM-25-2-A-[0.2-50/0.1] |
| CNCS-ADFPM-25-2-C-[0.2-50/0.1] |
| CNCS-ADFPM-25-3-A-[0.2-50/0.1] |
| CNCS-ADFPM-25-3-C-[0.2-50/0.1] |
| CNCS-ADFPM-25-4-A-[0.2-50/0.1] |
| CNCS-ADFPM-25-4-C-[0.2-50/0.1] |
| CNCS-ADFPM-30-3-A-[0.2-50/0.1] |
| CNCS-ADFPM-30-3-C-[0.2-50/0.1] |
| CNCS-ADFPM-30-4-A-[0.2-50/0.1] |
| CNCS-ADFPM-30-4-C-[0.2-50/0.1] |
| CNCS-ADFT-16-2-A-[0.2-50/0.1] |
| CNCS-ADFT-16-2-C-[0.2-50/0.1] |
| CNCS-ADFT-16-3-A-[0.2-50/0.1] |
| CNCS-ADFT-16-3-C-[0.2-50/0.1] |
| CNCS-ADFT-25-2-A-[0.2-50/0.1] |
| CNCS-ADFT-25-2-C-[0.2-50/0.1] |
| CNCS-ADFT-25-3-A-[0.2-50/0.1] |
| CNCS-ADFT-25-3-C-[0.2-50/0.1] |
| CNCS-ADFT-25-4-A-[0.2-50/0.1] |
| CNCS-ADFT-25-4-C-[0.2-50/0.1] |
| CNCS-ADFT-30-3-A-[0.2-50/0.1] |
| CNCS-ADFT-30-3-C-[0.2-50/0.1] |
| CNCS-ADFT-30-4-A-[0.2-50/0.1] |
| CNCS-ADFT-30-4-C-[0.2-50/0.1] |
| CNCS-ADFY-16-2-A-[0.2-50/0.1] |
| CNCS-ADFY-16-2-C-[0.2-50/0.1] |
| CNCS-ADFY-16-3-A-[0.2-50/0.1] |
| CNCS-ADFY-16-3-C-[0.2-50/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | CN1 | CN2 | Number Of Cores | Shell size | Cable standard (UL/CSA) | Cable color | Twisted pair | Conductor dimensions (AWG) | Environment resistant | Bend tolerant | Cable type | Specified Length (M) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [2] 2 | 16 | N/A | Gray | N/A | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [2] 2 | 16 | N/A | Navy | N/A | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [3] 3 | 16 | N/A | Gray | N/A | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [3] 3 | 16 | N/A | Navy | N/A | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [2] 2 | 25 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [2] 2 | 25 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [3] 3 | 25 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [3] 3 | 25 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | 4 | 25 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | 4 | 25 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [3] 3 | 30 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | [3] 3 | 30 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | 4 | 30 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Cut off | 4 | 30 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [2] 2 | 16 | - | Gray | - | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [2] 2 | 16 | - | Navy | - | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [3] 3 | 16 | - | Gray | - | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [3] 3 | 16 | - | Navy | - | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [2] 2 | 25 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [2] 2 | 25 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [3] 3 | 25 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [3] 3 | 25 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | 4 | 25 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | 4 | 25 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [3] 3 | 30 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | [3] 3 | 30 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | 4 | 30 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Female straight | 4 | 30 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [2] 2 | 16 | - | Gray | - | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [2] 2 | 16 | - | Navy | - | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [3] 3 | 16 | - | Gray | - | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [3] 3 | 16 | - | Navy | - | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [2] 2 | 25 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [2] 2 | 25 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [3] 3 | 25 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [3] 3 | 25 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | 4 | 25 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | 4 | 25 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [3] 3 | 30 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | [3] 3 | 30 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | 4 | 30 | - | Gray | - | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Male straight | 4 | 30 | - | Navy | - | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [2] 2 | 16 | N/A | Gray | N/A | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [2] 2 | 16 | N/A | Navy | N/A | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [3] 3 | 16 | N/A | Gray | N/A | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [3] 3 | 16 | N/A | Navy | N/A | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [2] 2 | 25 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [2] 2 | 25 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [3] 3 | 25 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [3] 3 | 25 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | 4 | 25 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | 4 | 25 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [3] 3 | 30 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | [3] 3 | 30 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | 4 | 30 | N/A | Gray | N/A | 14 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Mark tube only | 4 | 30 | N/A | Navy | N/A | 14 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | [2] 2 | 16 | N/A | Gray | N/A | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | [2] 2 | 16 | N/A | Navy | N/A | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | [3] 3 | 16 | N/A | Gray | N/A | 18 | N/A | N/A | A | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | [3] 3 | 16 | N/A | Navy | N/A | 18 | Oil-resistant | Flexible | C | 0.2 ～ 50 |
Loading...
General-purpose Large Metal Connector (NCS)
Features
● NCS series connectors are round metal connectors that have been used conventionally as general-purpose type connectors.● The structure is simple, robust, mechanically and electrically stable; some items have acquired the mark (Electrical Appliance and Material Safety Act compliant), so they can be used widely from power supply to signal transmission.
● There are 10 shell sizes, each of which offers a selection among panel mounting, cable mounting, and relay mounting, providing a wide variety of combinations to suit the application.
● Because these connectors are all connected by soldering, no dedicated tool is required for wiring.
● The structure is an original design and cannot be coupled with other companies' products.
Common Specifications
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Shell / Dustproof Cap | Zinc Alloy or Brass | Chrome Plated or special chemical processing |
| Insulator | Epoxy Resin | ー |
| Contact | Copper Alloy | Nickel-plated (Shell Size 14 ~ 30) |
| Silver-plated (Shell Size 40 ~ 60) | ||
| Gold-plated (Shell Size 30, 13-core) |
Combination Method
Characteristics
| Item | Characteristics |
|---|---|
| Rated Voltage, Current | Check with the table below. |
| Limit Operating Voltage | Check with the table below. Shows the limit voltage value for continuous use of the NCS connector. |
| Withstand Voltage | No abnormality such as short circuiting occurs when regulated voltage (see table below) is applied for 1 minute between immediately adjacent conductors. |
| Insulation Resistance | Check with the table below. Resistance value when measured between immediately adjacent conductors with specified voltage. |
| Contact Resistance | Check with the table below. Conductor resistance value when a pair of contacts are connected at up to the regulation length |
| Humidity Resistance | No functional defect was found during the JIS-C-8306 humidity test, and the insulation resistance is 10 mΩ or higher. |
| Heat Resistance Test | No functional defect was found during the JIS-C-8306 heat resistance test. |
| Temperature Rise | Under correct operating conditions, the temperature rise in conducting parts is 40°C or less when rated current is flowing. |
| Corrosion Resistance | No functional defect was found during the JIS C 5028 salt water spray test. |
| Allowable Operating Temperature Range | -40°C ~ +120°C |
| Shell Size |
Number of Cores | Shape Symbol | Rated Current (A or less) |
Rated Voltage (V or less) |
Limit Operating Voltage (Note) | Withstand Voltage (VAC) | Insulation Resistance (MΩ or higher) |
Contact Resistance (mΩ or less) |
Applicable Electric Wire Size Conductor Cross-sectional Area mm2 Parentheses show AWG |
Applicable Electric Wire Finished Outer Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| 14 | 1.2 | P, R, AD | 5 | 125 | 200 | 1,000 | 2,000 | 3 | 0.75 (18) | φ5.5 ~ 7.0 |
| 16 | 1 | P, R AD |
10 | 125 | 200 | 1,000 | 2,000 | 3 | 1.25 (18) | φ6.5 ~ 8.0 |
| 2.3.4 | 5 | 0.75 (18) | ||||||||
| 16 | 2.3 | PM, RF, ADF | 5 | 125 | 200 | 1,000 | 2,000 | 3 | 0.75 (18) | φ6.5 ~ 8.0 |
| 25 | 2.3.4 | P, R, AD GP1-2, LP |
10 | 250 | 400 | 2,000 | 2,000 | 3 | 2 (14) | φ9.5 ~ 11.5 |
| 5 | 1,800 | |||||||||
| 6.7 | 300 | |||||||||
| 8 | 5 | 1.25 (16) | ||||||||
| 25 | 2.3.4 | PM, RF, ADF GPM1-2 |
10 | 250 | 400 | 2,000 | 2,000 | 3 | 2 (14) | φ9.5 ~ 11.5 |
| 5 | 1,800 | 1.25 (16) | ||||||||
| 6.7 | 5 | 300 | ||||||||
| 30 | 2 | P, R, AD GP1-2 |
15 | 250 | 400 | 2,000 | 2,000 | 3 | 3.5 (12) | φ11.0 ~ 13.0 |
| 3.4 | 2 (14) | |||||||||
| 5.6.7 | 1,800 | |||||||||
| 8 | 10 | 300 | ||||||||
| 13 | 5 | - | 1,500 | 1.25 (16) | ||||||
| 30 | 2.3.4 | PM, RF, ADF GPM1-2 |
15 | 250 | 400 | 2,000 | 2,000 | 3 | 2 (14) | φ11.0 ~ 13.0 |
| 5 | 1,800 | |||||||||
| 6 | 10 | - | ||||||||
| 8 | 5 | 300 | 1.25 (16) | |||||||
| 40 | 2.3.4 | PM, RF, ADF GP1 |
30 | 250 | 500 | 2,500 | 2,000 | 3 | 5.5 (10) | φ15.0 ~ 17.0 |
| 5.6.8 | 20 | 400 | 2,000 | |||||||
| 10 | 3-piece - 10, 7-piece - 5 | 300 | 1,800 | Contact No. 1, 9, 10-2 (14) , Others - 1.25 (16) | ||||||
| 12 | 3-piece - 10, 9-piece - 5 | Contact No. 1, 9, 10-2 (14) , Others - 1.25 (16) | ||||||||
| 16 | 3-piece - 10, 13-piece - 5 | Contact No. 1, 14, 15-2 (14) , Others - 1.25 (16) | ||||||||
| 20 | 5 | 1.25 (16) | ||||||||
| 44 | 2.3.4 | PM, RF, ADF GPM1 |
30 | 250 | 500 | 2,500 | 2,000 | 3 | 5.5 (10) | φ15.0 ~ 19.0 |
| 5.6.8 | 20 | 400 | 2,000 | |||||||
| 10 | 3-piece - 10, 7-piece - 5 | 300 | 1,800 | Contact No. 1, 9, 10-2 (14) , Others - 1.25 (16) | ||||||
| 12 | 3-piece - 10, 9-piece - 5 | Contact No. 1, 9, 10-2 (14) , Others - 1.25 (16) | ||||||||
| 16 | 3-piece - 10, 13-piece - 5 | Contact No. 1, 14, 15-2 (14) , Others - 1.25 (16) | ||||||||
| 20 | 5 | 1.25 (16) | ||||||||
| 50 | 2.3 | P, R, AD GP1 |
80 | 500 | 600 | 3,000 | 5,000 | 1 | 30 (2) | φ19.0 ~ 23.0 |
| 4 | 50 | 250 | 500 | 2,500 | 2,000 | 3 | 14 (6) | |||
| 8 | 25 | 400 | 2,000 | 3.5 (12) | ||||||
| 10 | 20 | 300 | ||||||||
| 15 | 15 | |||||||||
| 25 | 4-piece - 15, 21-piece - 5 | 1,800 | Contact No. 3, 6, 19, 22-3.5 (12), Others - 2 (14) | |||||||
| 54 | 2.3 | PM, RF, ADF GPM1 |
80 | 500 | 600 | 3,000 | 5,000 | 1 | 30 (2) | φ19.0 ~ 26.0 |
| 4 | 50 | 250 | 500 | 2,500 | 2,000 | 3 | 14 (6) | |||
| 8 | 25 | 400 | 2,000 | 3.5 (12) | ||||||
| 10 | 20 | 300 | ||||||||
| 15 | 15 | |||||||||
| 25 | 4-piece - 15, 21-piece - 5 | 1,800 | Contact No. 3, 6, 19, 22-3.5 (12), Others - 2 (14) | |||||||
| 60 | 2 | P, R, AD GP1.25 |
150 | 500 | 600 | 3,000 | 5,000 | 1 | 50 (0) | φ29.0 ~ 33.0 |
| 3 | ||||||||||
| 4 | 80 | 30 (2) | ||||||||
| 10 | 30 | 250 | 300 | 2,500 | 2,000 | 3 | 8 (8) | |||
| 15 | 15 | 3.5 (12) | ||||||||
| 30, 40 | 5 | 1,500 | 2 (14) | |||||||
| 32 | 3-piece - 15, 29-piece - 5 | Contact No. 2, 24, 28-3.5 (12), Others - 2 (14) | ||||||||
| 60 | 10 | PM, RF, ADF GPM1.25 |
30 | 250 | 300 | 2,000 | 2,000 | 3 | 8 (8) | φ29.0 ~ 33.0 |
| 15 | 15 | 3.5 (12) | ||||||||
| 30 | 5 | 1,500 | 2 (14) | |||||||
| 32 | 3-piece - 15, 29-piece - 5 | 1,800 | Contact No. 2, 24, 28-3.5 (12), Others - 2 (14) | |||||||
| 64 | 2 | PM, RF, ADF GPM1.25 |
150 | 500 | 600 | 3,000 | 5,000 | 1 | 50 (0) | φ31.0 ~ 36.0 |
| 3 | ||||||||||
| 4 | 80 | 30 (2) |
NCS Connector Contact Arrangement Diagram
Connection Work Method
1. Disassemble the connector according to the following.
Note: If a contact for 80 A or 150 A is mounted, use the following procedure.
(1) Loosen the lock screws and remove the insulator from the connector body (turn counterclockwise)
(2) Loosen the clamp screws and remove the clamp saddle from the connector body
(1) Insert the contact wrench from the coupling side and remove the contact locking nut
2. Pass the disassembled parts through the cable in the order shown below.
Note: Avoid mistakes in the order or direction of parts.
3. Following the figure and table below, perform preparatory soldering for the core wires of the end-processed cable.
4. Solder
(1) Insert the core wire with extra solder into the contact solder pot(2) Heat the contact and the core wire with a soldering iron (conductor cross-sectional area 0.75 ~ 3.5 mm2 (AWG18 ~ AWG12) 30 seconds or less, and conductor cross-sectional area 5.5 ~ 14 mm2 (AWG10 ~ AWG6) 60 seconds or less)
(3) Apply solder and fill the gap between the contact and the core wires
5. Assemble the connector according to the following.
(1) Screw the insulator firmly to the connector body (contacts for 80 A and 150 A should be installed with a contact wrench beforehand)(2) Tighten the lock screws (tighten the connector body and insulator to the extent that they do not loosen when rotated by hand)
(3) Tighten the clamp screw and attach the clamp saddle to the plug body
Conductor Area and Soldering Iron
| Soldering Iron Wattage |
Iron Tip Temperature (°C) |
Wire Size (Upper Part mm2, Lower Part AWG) | ||||||
|---|---|---|---|---|---|---|---|---|
| 0.75 | 1,25 | 2 | 3.5 | 5.5 | 8 | 14 | ||
| 18 | 16 | 14 | 12 | 10 | 8 | 6 | ||
| 15 W | 320 ~ 370 |
○ | ||||||
| 30 W | ○ | ○ | ○ | |||||
| 60 W | ○ | ○ | ||||||
| 80 W | ○ | ○ | ○ | |||||
| 100 W | ○ | ○ | ○ | ○ | ||||
| 150 W | ○ | ○ | ||||||
| 200 W | ○ | |||||||
Cable End Processing Dimensional Table
Shape Symbols for P and AD (LP, GP * Common)
· Shape symbols LP, GP * are the same as P. · Shape symbol R is the same as AD, but can be used with A dimension at the length of your choice.
| Product No. | Terminal Number | A | B | Product No. | Terminal Number | A | B | Product No. | Terminal Number | A | B | Product No. | Terminal Number | A | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NCS-14-1-P | All Poles | 13.5 | 6 | NCS-40-5-P | All Poles | 23 | 10 | NCS-14-1-AD | All Poles | 20 | 6 | NCS-40-5-AD | All Poles | 35 | 10 |
| NCS-14-2-P | 1 2 |
11 10 |
3.5 4 |
NCS-40-6-P | 6 Other Poles |
22 23 |
NCS-14-2-AD | NCS-40-6-AD | |||||||
| NCS-16-1-P | All Poles | 13 | 6 | NCS-40-8-P | 8 Other Poles | 22 23 |
NCS-16-1-AD | 11 | NCS-40-8-AD | ||||||
| NCS-16-2-P | 1 2 |
13 11 |
4 | NCS-40-10-P | 1.9.10 Other Poles |
22 23 |
7 | NCS-16-2-AD | 20 | NCS-40-10-AD | 1.9.10 Other Poles |
34 35 |
7 | ||
| NCS-16-3-P | 1 2.3 |
11 13 |
NCS-40-12-P | NCS-16-3-AD | NCS-40-12-AD | ||||||||||
| NCS-16-4-P | 1.2.4 3 |
11 10 |
NCS-40-16-P | 1.14.15 Other Poles |
22 23 |
NCS-16-4-AD | NCS-40-16-AD | 1.14.15 Other Poles |
34 35 |
||||||
| NCS-25-2-P | All Poles | 18 | 8 | NCS-40-20-P | 1.6.9 Other Poles |
22 23 |
NCS-25-2-AD | 24 | 7 | NCS-40-20-AD | All Poles | 35 | |||
| NCS-25-3-P | NCS-50-2-P | All Poles | 35 | 13 | NCS-25-3-AD | NCS-50-2-AD | 42 | 13 | |||||||
| NCS-25-4-P | NCS-50-3-P | NCS-25-4-AD | NCS-50-3-AD | ||||||||||||
| NCS-25-5-P | 17 | 7 | NCS-50-4-P | 33 | 11 | NCS-25-5-AD | NCS-50-4-AD | 40 | 11 | ||||||
| NCS-25-6-P | 6 Other Poles |
13 17 |
NCS-50-8-P | 8 Other Poles |
32 34 |
7 | NCS-25-6-AD | NCS-50-8-AD | 7 | ||||||
| NCS-25-7-P | 7 Other Poles |
13 17 |
NCS-50-10-P | 10 Other Poles |
32 36 |
NCS-25-7-AD | NCS-50-10-AD | ||||||||
| NCS-25-8-P | 8 Other Poles |
13 17 |
NCS-50-15-P | All Poles | 34 | 9 | NCS-25-8-AD | NCS-50-15-AD | 42 | 9 | |||||
| NCS-30-2-P | All Poles | 19 | 8 | NCS-50-25-P | 3.6.19.22 Other Poles |
30 34 |
9 8 |
NCS-30-2-AD | 24 | 8 | NCS-50-25-AD | 3.6.19.22 Other Poles |
42 43 |
9 8 |
|
| NCS-30-3-P | 7 | NCS-60-2-P | All Poles | 43 | 15 | NCS-30-3-AD | 7.5 | NCS-60-2-AD | All Poles | 45 | 15 | ||||
| NCS-30-4-P | NCS-60-3-P | NCS-30-4-AD | NCS-60-3-AD | ||||||||||||
| NCS-30-5-P | NCS-60-4-P | 13 | NCS-30-5-AD | NCS-60-4-AD | 13 | ||||||||||
| NCS-30-6-P | 6 Other Poles |
16 19 |
NCS-60-10-P | 41 | 12 | NCS-30-6-AD | NCS-60-10-AD | 47 | 12 | ||||||
| NCS-30-7-P | 7 Other Poles |
16 19 |
NCS-60-15-P | 9 | NCS-30-7-AD | NCS-60-15-AD | 9 | ||||||||
| NCS-30-7H-P | All Poles | 19 | NCS-60-30-P | 43 | 8 | NCS-30-7H-AD | 7 | NCS-60-30-AD | 48 | 8 | |||||
| NCS-30-8-P | 8 Other Poles |
16 19 |
NCS-60-32-P | 2.24.28 Other Poles |
39 43 |
9 8 |
NCS-30-8-AD | NCS-60-32-AD | 2.24.28 Other Poles |
47 48 |
9 8 |
||||
| NCS-30-13-P | All Poles | 17 | 6 | NCS-60-40-P | All Poles | 43 | 8 | NCS-30-13-AD | 6 | NCS-60-40-AD | All Poles | 48 | 8 | ||
| NCS-40-2-P | 22 | 10 | NCS-40-2-AD | 35 | 6 | ||||||||||
| NCS-40-3-P | NCS-40-3-AD | ||||||||||||||
| NCS-40-4-P | NCS-40-4-AD |
Shape Symbols for P and AD (LP, GP * Common)
· Shape symbols LP, GP * are the same as P. · Shape symbol R is the same as AD, but can be used with A dimension at the length of your choice.
| Product No. | Terminal Number | A | B | Product No. | Terminal Number | A | B | Product No. | Terminal Number | A | B | Product No. | Terminal Number | A | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NCS-16-2-PM | All Poles | 13 | 6 | NCS-44-16-PM | 1.14.15 Other Poles |
25 26 |
7 | NCS-16-2-ADF | All Poles | 20 | 6 | NCS-44-16-ADF | 1.14.15 Other Poles |
31 32 |
7 |
| NCS-16-3-PM | NCS-44-20-PM | All Poles | 26 | NCS-16-3-ADF | NCS-44-20-ADF | 1.6.9 Other Poles |
31 32 |
||||||||
| NCS-25-2-PM | 18 | 7 | NCS-54-2-PM | 45 | 13 | NCS-25-2-ADF | 24 | 8 | NCS-54-2-ADF | All Poles | 50 | 13 | |||
| NCS-25-3-PM | NCS-54-3-PM | NCS-25-3-ADF | 7 | NCS-54-3-ADF | |||||||||||
| NCS-25-4-PM | NCS-54-4-PM | 43 | 11 | NCS-25-4-ADF | NCS-54-4-ADF | 46 | 11 | ||||||||
| NCS-25-5-PM | 6 | NCS-54-8-PM | 7 | NCS-25-5-ADF | 6 | NCS-54-8-ADF | 8 Other Poles | 45 47 | 7 | ||||||
| NCS-25-6-PM | NCS-54-10-PM | NCS-25-6-ADF | NCS-54-10-ADF | 10 Other Poles |
45 47 |
||||||||||
| NCS-25-7-PM | NCS-54-15-PM | 45 | 9 | NCS-25-7-ADF | NCS-54-15-ADF | All Poles | 47 | 9 | |||||||
| NCS-30-2-PM | 22 | 8 | NCS-54-25-PM | 3.6.19.22 Other Poles |
45 48 |
9 8 |
NCS-30-2-ADF | 26 | 8 | NCS-54-25-ADF | 3.6.19.22 Other Poles |
31 35 |
9 8 |
||
| NCS-30-3-PM | NCS-60-10-PM | All Poles | 46 | 12 | NCS-30-3-ADF | 7 | NCS-60-10-ADF | All Poles | 41 | 12 | |||||
| NCS-30-4-PM | NCS-60-15-PM | 9 | NCS-30-4-ADF | NCS-60-10-ADF | 9 | ||||||||||
| NCS-30-5-PM | 21 | NCS-60-30-PM | 47 46 |
8 | NCS-30-5-ADF | NCS-60-30-ADF | 43 | 8 | |||||||
| NCS-30-6-PM | 20 | 7 | NCS-60-32-PM | 2.24.28 Other Poles |
47 | 9 8 |
NCS-30-6-ADF | NCS-60-32-ADF | 2.24.28 Other Poles |
39 43 |
9 8 |
||||
| NCS-30-8-PM | NCS-64-2-PM | All Poles | 47 | 15 | NCS-30-8-ADF | NCS-64-2-ADF | All Poles | 47 | 15 | ||||||
| NCS-44-2-PM | 26 | 10 | NCS-64-3-PM | NCS-44-2-ADF | 31 | 10 | NCS-64-3-ADF | ||||||||
| NCS-44-3-PM | NCS-64-4-PM | 13 | NCS-44-3-ADF | NCS-64-4-ADF | 13 | ||||||||||
| NCS-44-4-PM | NCS-44-4-ADF | ||||||||||||||
| NCS-44-5-PM | NCS-44-5-ADF | 32 | |||||||||||||
| NCS-44-6-PM | NCS-44-6-ADF | 6 Other Poles |
31 32 |
||||||||||||
| NCS-44-8-PM | NCS-44-8-ADF | 8 Other Poles |
31 32 |
||||||||||||
| NCS-44-10-PM | 1.9.10 All Poles |
25 26 |
7 | NCS-44-10-ADF | 1.9.10 Other Poles |
31 32 |
7 | ||||||||
| NCS-44-12-PM | NCS-44-12-ADF |
Basic Information
| Connector type | NCS | Connector manufacturer | Nanaboshi Electric Mfg. Co., Ltd. | Cable rated voltage(V) | 300 |
|---|---|---|---|---|---|
| Cable shape | Circular | Shield | N/A |
Specification/Dimensions
-
CN1
- Male straight
- Male relay straight
- Male panel mount
- Female straight
- Female relay straight
- Female panel mount
-
CN2
- Male straight
- Female straight
- Cut off
- Y terminal
- Mark tube only
-
Number Of Cores
- 2
- 3
- 4
- 2
-
Shell size
-
Cable standard (UL/CSA)
- N/A
-
Cable color
- Gray
- Navy
-
Twisted pair
- N/A
-
Conductor dimensions(AWG)
-
Environment resistant
- N/A
- Oil-resistant
-
Bend tolerant
- Flexible
- N/A
-
Cable type
- A
- C
-
Specified Length(M)
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- JL04 Waterproof/Straight/Panel Mountable Connector Harness
- NRW Straight/Relay/Panel Mountable Connector Harness
- NET Straight/Panel Mountable Connector Harness
- PRC03 One-touch/Relay Connector Harness
- R03 Straight Connector Harness
- R03 Connector Relay Harness
- HR10A Connector Straight Harness
- HR10A Connector Relay Harness
Customers Who Viewed This Item Also Viewed
-
NCS Panel Mountable Receptacle (Screw)MISUMI
Standard Price : MYR 33.89-
Days to Ship : 2 Day(s) or more
-
-
-
Cable with PRC05 connector One-touch, straight, panel mounting typeMISUMI
Days to Ship : 6 Day(s) or more
-
-
-
-
-
-
Cable with PRC04 connector One-touch, straight, panel mounting typeMISUMI
Days to Ship : 6 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy