Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.
(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
HR10A Connector Relay Harness
A harness with a wire-to-wire connector using Hirose Electric HR10 connector. The single-action, waterproof design improves wiring work efficiency in various environments
- For Signal
- Connection between Devices
- Sensor
- EMI Countermeasure
- Solder
- One-Touch Lock
- Silver-Plated
- MISUMI Original
● Available as a relay of HR10A connector. It has excellent anti-noise performance if combined with a double-shielded cable.
● Shield is connected in the shell of the connector.
Wiring and Wire Color Page
>>Click here
Component Page
>>Click here
Part Number
Configured Part Number is shown.
Specifications
| Specified Length (m) | 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| JP (Male for Relay) |  |   | 4 | 0.2 ~ 50 Can be specified by 0.1 m increments | |
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JS (Female for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPP (Male for Relay / Male Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JSS (Female for Relay / Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPS (Male for Relay / Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| HR10AJ Hirose Electric Co., Ltd | 12 | ||||
| JSP (Female For Relay / Male Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPJP (Male for Relay / Male for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JSJS (Female for Relay / Female for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPJS (Male for Relay / Female for Relay) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| Connector >>Click here | JPY (Male for Relay / Y Terminal) With Pin No. Insertion Mark Tube |  | 4 | ||
| 6 | |||||
| 10 | |||||
| 12 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| HR10AJ Hirose Electric Co., Ltd | JSY (Female for Relay / Y Terminal) with Pin No. Insertion Mark Tube |  |   | 4 | 0.2 ~ 50 Can be specified by 0.1 m increments |
| 6 | |||||
| 10 | |||||
| 12 | |||||
| JPT (Male for Relay / Loose Wires) with Pin No. Insertion Mark Tube |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| Connector >>Click here | JST (Female for Relay / Loose Wires) with Pin No. Insertion Mark Tube |  | 4 | ||
| 6 | |||||
| 10 | |||||
| 12 |
More Information
Electrical Properties
| Number of Cores | Connector | A Cable | ||||
| Rated Current (A or less) | Rated Voltage (V or less) | Section Area | Rated Voltage | Allowable Current A (30°C) | ||
| AC | DC | |||||
| 4 | 2 | 100 | 140 | AWG28 (0.08mm2) | 30V | 2.3 |
| 6 | 100 | 140 | ||||
| 10 | 1.8 | |||||
| 12 | ||||||
| Part Number |
|---|
| HR10AJ-JPY-SB-4-[0.2-50/0.1] |
| HR10AJ-JPY-SB-6-[0.2-50/0.1] |
| HR10AJ-JPY-SB-10-[0.2-50/0.1] |
| HR10AJ-JPY-SB-12-[0.2-50/0.1] |
| HR10AJ-JSY-SB-4-[0.2-50/0.1] |
| HR10AJ-JSY-SB-6-[0.2-50/0.1] |
| HR10AJ-JSY-SB-10-[0.2-50/0.1] |
| HR10AJ-JSY-SB-12-[0.2-50/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | CN1 | CN2 | Number Of Cores | Bend tolerant | Specified Length (m) |
|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Y terminal | 4 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Y terminal | [6] 6 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Y terminal | 10 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Male relay straight | Y terminal | 12 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | 4 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | [6] 6 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | 10 | - | 0.2 ～ 50 | ||
- | 1 Piece(s) | 6 Day(s) or more | Female relay straight | Y terminal | 12 | - | 0.2 ～ 50 |
Loading...
Characteristics
| Item | Contents |
|---|---|
| Rated Current | 2 A or lower |
| Rated Voltage | 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC |
| Withstand Voltage | 300 VAC or less (500 VAC or less for 4-core) / 1 minute |
| Insulation Resistance | 1,000 MΩ or more / 100 VDC |
| Contact Resistance | 10 mΩ or less / 1 ADC |
| Compatible Wire Size | AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires |
* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Satin Nickel Plated |
| Pin Contact | Brass | Silver Plating |
| Socket Contact | Phosphor Bronze | Silver Plating |
| Insulator | Polyamide Resin | Black |
Contact Arrangement Diagram
Connection Work Method (Relay type can be done by the same method.)
| Number of Cores | Wrench Spacing (mm) | D Dimension (mm) | Wrench Tightening Force |
|---|---|---|---|
| 4.6 | 7.5 | 10 | 1.5 N・m (15 kgf・cm) |
| 10.12 | 9.5 | 16 | 1.5 N・m (15 kgf・cm) |
Connector Insertion and Removal Method
Basic Information
| Connector type | HR10 | Connector manufacturer | Hirose Electric Group | Cable rated voltage(V) | 30 |
|---|---|---|---|---|---|
| Cable shape | Circular | Shield | 2 Layer | Cable standard (UL/CSA) | UL |
| Cable color | Black | Twisted pair | Included | Conductor dimensions(AWG) | 28 |
| Cable type | SB |
Specification/Dimensions
-
CN1
- Male relay straight
- Female relay straight
-
Number Of Cores
- 4
- 6
- 10
- 12
-
Bend tolerant
- N/A
-
Specified Length(m)
-
CN2
- Male straight
- Male relay straight
- Female straight
- Female relay straight
- Cut off
- Y terminal
- Mark tube only
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cable with R04 Connector For Relay
- NJC Straight/Relay/Panel Mountable Connector Harness
- NR Straight/Relay/Panel Mountable Connector Harness
- NJW Straight/Relay/Panel Mountable Connector Harness
- PRC05 One-touch/Relay Connector Harness
- R03 Connector Relay Harness
- PTL Connector Straight/Relay Harness
- Industrial Ethernet Connector XS5/XS6 M12 Connector Harness
Customers Who Viewed This Item Also Viewed
-
-
HR10 Series Miniature Circular ConnectorHIROSE ELECTRIC
Standard Price : MYR 1.64-
Days to Ship : 1 Day(s) or more
-
HR10 Straight Plug (One-touch Lock)MISUMI
Standard Price : MYR 53.44-
Days to Ship : 2 Day(s) or more
-
-
Microminiature Circular Connectors, HR25/HR25A SeriesHIROSE ELECTRIC
Standard Price : MYR 5.46-
Days to Ship : 3 Day(s) or more
-
HR10 Relay Adapter (One-touch Lock)MISUMI
Standard Price : MYR 48.87-
Days to Ship : 4 Day(s) or more
-
-
-
HR10 Panel Mount Receptacle (One-touch Lock)MISUMI
Standard Price : MYR 29.02-
Days to Ship : 2 Day(s) or more
-
Cable with PRC05 connector One-touch, straight, panel mounting typeMISUMI
Days to Ship : 6 Day(s) or more
-
-
Miniature Circular Waterproof Shielded Connector (Bayonet Lock Type), LF SeriesHIROSE ELECTRIC
Standard Price : MYR 28.65-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy