(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Cable NAUL1283 / NAUL1284 UL Supported (Part Numbers)

Cable NAUL1283 / NAUL1284 UL Supported

Move the mouse over the image to zoom

600 V international standard single core wire. You can purchase in units of 1 m.

  • CSA
  • VW-1
  • ULAWM
  • For Power Supply
  • Heat-Resistant
  • Strand Wire
  • 600 V

● It can be purchased at a cut length of 1 m increments.
● Offers improved heat-resistance compared to Japan standard 600 V rated wires (IV, KIV).
● NAUL1283 is available in 6 colors including ground wire (Green / Yellow).
● There is a whole range of AWG sizes for use in a variety of areas.

· Be careful not to confuse the specified length and quantity when placing an order.
All unit prices below are per meter.
· The GY (green / yellow) has a yellow band (approximately 30% retained) applied onto a green wire core.
· This product is compatible with "UL Traceability Program / Processed Wire."

The Electrical Appliance and Material Safety Law certificate has not been obtained.

PDF

Part Number

Configured Part Number is shown.

NAUL1283-8-W-153

Configured Specifications

Overall Length(m)153Conductor Cross Section(mm2)8
AWG size(AWG)8Number Of Cores(Core)1
Finished outer diameter(mm)7.2Rated Voltage600V
ShieldNonePropertiesHeat resistance
Representative StandardUL / CSA(c-UL)Sheath (outer coating) colorWhite color
Sheath (outer coating) materialPVCOther propertiesPliability
Show More
RoHS- - -
Show Less

Specifications

NAUL1283 / NAUL1284 UL Supported:Related Image

Model NumberAWG SizeColor
NAUL12838 * (8.0 mm2)W (White)
BK (Black)
R (Red)
BE (Blue)
GN (Green)
6 * (14 mm2)
4 * (22 mm2)
2 * (34 mm2)
8 * (8.0 mm2)GY
(Green / Yellow)
6 * (14 mm2)
4 * (22 mm2)
2 * (3.4 mm2)
NAUL12841 * (43 mm2)BK (Black)
1-0 * (54 mm2)
2-0 * (69 mm2)
3-0 * (87 mm2)
4-0 * (108 mm2)
* (~ mm2) is to be used only as an estimated section area. Refer to the comparison table on >>Click here for details.


Be sure to read the following precautions when you place an order.
* Length in "m" is included in our model numbers. Always specify quantity as number of units, not as meters.
* For the latest information regarding standard unit price, quantity slide unit price, shipment days, etc., refer to the Misumi VONA e-catalog.
* Color and softness may vary slightly due to manufacturer changes.

More Information

Operating Temperature Range0 ~ 105°C
Standard AcquiredULAWM1283 / ULAWM1284
Bending RadiusFinished Outer Diameter x 6 (Fixed Part Only)

Model NumberAWG
Size
ColorSpecified Length
(m)
ConductorVinyl
Insulator Thickness
(mm)
Finished Outer Diameter
Approx. (mm)
Max. Conductor Resistance
Ω/km (20 °C)
Test Voltage
V / Min
Insulation Resistance
MΩkm or more (20°C)
Allowable Current
A (30 °C)
Approximate Mass
kg/km
Structure
(Strands / mm)
Outer Diameter
(mm)
NAUL12838 * (8.0 mm2)W (White) / BK (Black)
R
(Red) / BE (Blue)
GN
(Green)
GY (Green / Yellow)
1 ~ 153
m
(Specify
1 m Increment)
55/0.453.9 1.657.2 2.1920004066120
6 * (14 mm2)87/0.454.8 1.658.1 1.384087175
4 * (22 mm2)7/20/0.457.0 1.6510.3 0.86530117275
2 * (34 mm2)7/31/0.458.7 1.6512.00.55430158400
NAUL12841 * (43 mm2)BK (Black)7/39/0.459.72.214.10.432250030185525
1-0 * (54 mm2)19/18/0.4511.02.215.40.34230214640
2-0 * (69 mm2)19/23/0.4512.52.216.90.27230251795
3-0 * (87 mm2)19/29/0.4514.02.218.40.21530291980
4-0 * (108 mm2)19/36/0.4515.62.220.00.177203401195
* (~ mm2) is to be used only as an estimated section area. Refer to the comparison table on >>Click here for details.
* For the outer diameter size of cables, wire sheath (coat), etc., refer to "Finished Outer Diameter" in the table above.
* Allowable current is to be used only as a reference value and is not guaranteed.

NAUL1283 / NAUL1284 UL Supported:Related Image

Current Reduction Factor
Ambient Temperature (°C)35404550556065707580859095100105
Current Reduction Factor0.970.930.890.860.820.770.730.680.630.580.520.450.370.260
Allowable current value indicates the calculated value of 1 cable laid aboveground in ambient temperature of 30°C, and is not a guaranteed value.
If the ambient temperature is 30 °C or above, the above current reduction factor is multiplied by the allowable current.
(Example) NAUL1283, AWG8: Allowable current value when the ambient temperature is 40 °C
80 x 0.93 = 74.4 (A)
Part Number
NAUL1283-8-W-153
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSOverall Length
(m)
Conductor Cross Section
(mm2)
AWG size
(AWG)
Finished outer diameter
(mm)
Sheath (outer coating) color

MYR 2,676.53

1 Piece(s) 4 Day(s) or more -153887.2White color
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSOverall Length
(m)
Conductor Cross Section
(mm2)
AWG size
(AWG)
Finished outer diameter
(mm)
Sheath (outer coating) color
  1. 1

Basic Information

Number Of Cores(Core) 1 Rated Voltage 600V Shield None
Properties Heat resistance Representative Standard UL / CSA(c-UL) Sheath (outer coating) material PVC
Other properties Pliability

Please check the type/dimensions/specifications of the part NAUL1283-8-W-153 in the Cable NAUL1283 / NAUL1284 UL Supported series.

Products like this...

Part Number
NAUL1283-8-BE-153
NAUL1283-8-BK-153
NAUL1283-8-GN-153
NAUL1283-8-GY-153
NAUL1283-8-R-153
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSOverall Length
(m)
Conductor Cross Section
(mm2)
AWG size
(AWG)
Finished outer diameter
(mm)
Sheath (outer coating) color

MYR 2,676.53

1 Piece(s) 4 Day(s) or more -153887.2[Blue] Blue

MYR 2,676.53

1 Piece(s) 4 Day(s) or more -153887.2Black

MYR 2,676.53

1 Piece(s) 4 Day(s) or more -153887.2Green

MYR 4,014.79

1 Piece(s) 4 Day(s) or more -153887.2[Other] Green/Yellow

MYR 2,676.53

1 Piece(s) 4 Day(s) or more -153887.2Red
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSOverall Length
(m)
Conductor Cross Section
(mm2)
AWG size
(AWG)
Finished outer diameter
(mm)
Sheath (outer coating) color

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)