(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Please note that E-Invoice will be sent to our customers by email. For more information, please read News. 

Heat Shrink Tube (Silicone / Heat Resistance / Flame Retardant) (Part Numbers)

Heat Shrink Tube (Silicone / Heat Resistance / Flame Retardant)

Click this image to zoom it.

  • Volume Discount

Heat-resistant silicone heat shrink tube that can be used at up to 200°C.

  • UL
  • Flame-Retardant

● Heat shrink tube is heat resistant for continuous use at 200°C.
● Shrinks objects with an elastic rubber body for highly airtight coating.
● Length changes very little, even after heat is applied for shrinking.
● UL224 VW-1 (E49996)

Part Number

Configured Part Number is shown.

ST-20DG-1

Configured Specifications

Internal diameter (before contraction)(mm)3.8-5.2Wall Thickness (after shrinking)(mm)1.2
Shrinkage Rate[2:1 to Less Than 3:1] 2:1MaterialSilicon
Flame RetardantPresentAdhesiveNone
Tube Length(mm)1000Special Function/ApplicationHeat resistant
Representative StandardULInternal diameter (mm)1.7-2.3
Number with packs(Units)1Continuous operating temperature range (Min) Min(℃)-50
Show More
Continuous operating temperature range (Max) Max(℃)200RoHS10
Show Less

Specification Table

■ Specification Table
(Unit: mm)
ModelOverall LengthInternal diameter before shrinkingInternal diameter after heat shrinkingWeight
(g)
Internal DiameterTube wall thickness (maximum)
ST-8DG-11 m1.4 to 2.20.6 to 0.91.21.3
ST-10DG-11.8 to 2.80.8 to 1.23.2
ST-15DG-13.0 to 4.21.3 to 1.810.2
ST-20DG-13.8 to 5.21.7 to 2.312.3
ST-25DG-15.0 to 6.72.2 to 2.914.5
ST-30DG-16.2 to 8.02.7 to 3.417.4
ST-40DG-17.8 to 10.03.5 to 4.420.5
ST-55DG-110.0 to 13.05.0 to 6.21.841.7
ST-80DG-115.0 to 19.07.3 to 9.055.3
ST-110DG-120.0 to 25.010.2 to 12.52.3102.4
ST-140DG-124.0 to 29.513.0 to 15.5123.7

Overview of Specifications

Basic Characteristics
MaterialSilicone Rubber
Shrinkage Temperature+80°C to 250°C
Shrinkage Rate50%
Operating Temperature Range-50°C to +200°C
ColorGray
Performance
ItemCharacteristic Values*
Tensile Strength6.0 MPa (61 kgf/cm2)
Stretch350%
Tear Strength15 KN/m (15.3 kgf/cm2)
Volume resistivity2 x 1014 Ω/cm
Insulation Pressure Withstand Value25 kV/mm
Permittivity (50 Hz)3.2
Dielectric Loss Tangent0.001
*Not guaranteed values.
Part Number
ST-20DG-1
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInternal diameter (before contraction)
(mm)
Wall Thickness (after shrinking)
(mm)
Internal diameter
(mm)

MYR 55.53

1 Piece(s)Available 4 Day(s) or more 103.8-5.21.21.7-2.3
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInternal diameter (before contraction)
(mm)
Wall Thickness (after shrinking)
(mm)
Internal diameter
(mm)
  1. 1

Basic Information

Shrinkage Rate 2:1 Material Silicon Flame Retardant Present
Adhesive None Tube Length(mm) 1000 Special Function/Application Heat resistant
Representative Standard UL Number with packs(Units) 1 Continuous operating temperature range (Min) Min(℃) -50
Continuous operating temperature range (Max) Max(℃) 200

Please check the type/dimensions/specifications of the part ST-20DG-1 in the Heat Shrink Tube (Silicone / Heat Resistance / Flame Retardant) series.

Products like this...

Part Number
ST-110DG-1
ST-140DG-1
ST-15DG-1
ST-25DG-1
ST-30DG-1
ST-40DG-1
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInternal diameter (before contraction)
(mm)
Wall Thickness (after shrinking)
(mm)
Internal diameter
(mm)

MYR 207.33

1 Piece(s)Available 4 Day(s) or more 1020.0-25.02.310.2-12.5

MYR 326.53

1 Piece(s)Available 4 Day(s) or more 1024.0-29.52.313.0-15.5

MYR 46.79

1 Piece(s)Available 4 Day(s) or more 103.0-4.21.21.3-1.8

MYR 57.22

1 Piece(s)Available 4 Day(s) or more 105.0-6.71.22.2-2.9

MYR 67.40

1 Piece(s)Available 4 Day(s) or more 106.2-8.01.22.7-3.4

MYR 77.11

1 Piece(s)Available 4 Day(s) or more 107.8-10.01.23.5-4.4
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInternal diameter (before contraction)
(mm)
Wall Thickness (after shrinking)
(mm)
Internal diameter
(mm)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)

Not a MISUMI customer yet? Register & enjoy 50% off your 1st order!* (*T&C apply.)

  • 7 Million Products
  • 2,000 Brands
  • Free CAD downloads
  • Quote/order any time