(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
TSC series carbide square end mill, 2-flute / 2.5D Flute Length model (TSC-EM2SR5.90)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
The lineup of fine intermediate flute length between short and regular is available only in Misumi
- TS
- General Steel
- 2 Flutes
- SR
Part Number
Configured Part Number is shown.
TSC-EM2SR5.90
| Part Number |
|---|
| TSC-EM2SR5.90 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 207.63 | 1 Piece(s) | Available | 12 Day(s) or more | 5.9 | 15 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Manufactured Product | 1 | □ |
Loading...
Specifications
Model Number
TSC-EM2SR (Standard) / TSC-PEM2SR (Sharp Edge)
| Outer Diameter D |
Shank Diameter d |
Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | - | 4 | 1.25 | 45 | 1 | ● |
| 1 | - | 4 | 2.5 | 45 | 1 | ● |
| 1.5 | - | 4 | 3.75 | 45 | 1 | ● |
| 2 | - | 4 | 5 | 45 | 1 | ● |
| 2 | 6 | 6 | 5 | 45 | 1 | ● |
| 2.5 | - | 4 | 6.25 | 45 | 1 | ● |
| 3 | - | 6 | 7.5 | 45 | 1 | ● |
| 3.51 ~ 3.99 | - | 6 | 10 | 50 | 1 | □ |
| 4 | - | 6 | 10 | 50 | 1 | ● |
| 4.51 ~ 4.99 | - |
6 |
12.5 | 55 | 1 | □ |
| 5 | - |
6 |
12.5 | 55 | 1 | ● |
| 5.51 ~ 5.99 | - |
6 |
15 | 60 | 1 | □ |
| 6 | - |
6 |
15 | 60 | 2 | ● |
| 7.51 ~ 7.99 | - |
8 |
20 | 70 | 1 | □ |
| 8 | - |
8 |
20 | 70 | 2 | ● |
| 9.51 ~ 9.99 | - |
10 |
25 | 80 | 1 | □ |
| 10 | - |
10 |
25 | 80 | 2 | ● |
| 11.51 ~ 11.99 | - |
12 |
30 | 85 | 1 | □ |
| 12 | - |
12 |
30 | 85 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The flute length is between that of short flutes and regular flutes, with a 2.5 times larger flute diameter.
Basic Information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Please check the type/dimensions/specifications of the part TSC-EM2SR5.90 in the TSC series carbide square end mill, 2-flute / 2.5D Flute Length model series.
Specification/Dimensions
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
- Countersunk
-
type
- SN-TSC-EM2SR
- SN-TSC-PEM2SR
- SNR-TSC-EM2SR
- SNR-TSC-PEM2SR
- TSC-EM2SR
- TSC-PEM2SR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
Days to Ship
-
- All
- 4 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| TSC-EM2SR10 |
| TSC-EM2SR12 |
| TSC-EM2SR2 |
| TSC-EM2SR6 |
| TSC-EM2SR7.70 |
| TSC-EM2SR7.87 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 159.01 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 25 | 10 | 80 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 2 | ● | |
MYR 274.56 | 1 Piece(s) | Available | 4 Day(s) or more | 12 | 30 | 12 | 85 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 2 | ● | |
MYR 50.19 | 1 Piece(s) | Available | 4 Day(s) or more | 2 | 5 | 4 | 45 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
MYR 86.29 | 1 Piece(s) | Available | 4 Day(s) or more | 6 | 15 | 6 | 60 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 2 | ● | |
MYR 290.49 | 1 Piece(s) | Available | 12 Day(s) or more | 7.7 | 20 | 8 | 70 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Manufactured Product | 1 | □ | |
MYR 290.49 | 1 Piece(s) | Available | 12 Day(s) or more | 7.87 | 20 | 8 | 70 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Manufactured Product | 1 | □ |
Additional Products in this Category
- XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model
- Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS
- ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub_FX-MG-EMSS
- AL3D-2DLC Aluminum-Only End Mill (DLC Coating)
- TAC2, 2-flute, A-cut End Mill MA
- TAC2 Long 2-Flute A Cut End Mill MA
- Axel Mill, 3-D High Efficiency Type, 3ZFKS (short)
- CoroMill Plura End Mill For Roughing, With Lubrication Hole R215.34 (Hardness < 28 HRC)
Customers Who Viewed This Item Also Viewed
-
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length ModelMISUMI
Days to Ship : 4 Day(s) or more
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, RegularMISUMI
Standard Price : MYR 125.95-
Days to Ship : 4 Day(s) or more
-
TSC series carbide square end mill, 4-flute / 2D Flute Length (short) modelMISUMI
Days to Ship : 4 Day(s) or more
-
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long ModelMISUMI
Standard Price : MYR 222.83-
Days to Ship : 4 Day(s) or more
-
XAC series carbide square end mill, 2-flute / short modelMISUMI
Standard Price : MYR 66.33-
Days to Ship : 4 Day(s) or more
-
Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular ModelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) modelMISUMI
Standard Price : MYR 55.62-
Days to Ship : 4 Day(s) or more
-
TSC series carbide square end mill, 2-flute / 3.5D Flute Length modelMISUMI
Days to Ship : 4 Day(s) or more
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, ShortMISUMI
Standard Price : MYR 124.38-
Days to Ship : 4 Day(s) or more
-
Straight Shank Drill, Regular Type Ti 657GUHRING
Standard Price : MYR 68.78-
Days to Ship : 8 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy