(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Part Number
Configured Part Number is shown.
TSC-PEM2LB0.4-2
Part Number |
---|
TSC-PEM2LB0.4-2 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 92.61 | 1 Piece(s) | Available | 4 Day(s) or more | 0.4 | 0.6 | 4 | 50 | 2 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 2.09 | 2.2 | 2.44 | 2.75 | 10° |
Loading...
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
1 | No Standards | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
1 | ● | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
2 | No Standards | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
4 | No Standards | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
3 | ● | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
2 | 6 | 6 | ● | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
3 | - | 4 | ● | ● | 10° | 3.14 | 3.30 | 3.66 | 4.12 | |||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.10 | 6.87 | |||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.30 | 3.66 | 4.12 | 1 |
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
5 | No Standards | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.40 | 12.27 | |||||
12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference | ||||||||
2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | 10° | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)
Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Figure |
1.5 | 8 ~ 20 | 4 | ● | ● | 3 | 1.45 | 40 | 3 |
1.6 | 9 ~ 20 | 4 | ● | ● | 3.2 | 1.55 | 40 | 3 |
1.8 | 9 ~ 20 | 4 | ● | ● | 3.6 | 1.75 | 40 | 3 |
2 | 9 ~ 21 | 4 | ● | ● | 4 | 1.95 | 40 | 3 |
2.5 | 10 ~ 22 | 4 | ● | ● | 5 | 2.4 | 40 | 3 |
3 | 11 ~ 21 | 6 | ● | ● | 6 | 2.9 | 45 | 3 |
4 | 13 ~ 23 | 6 | ● | ● | 8 | 3.8 | 45 | 3 |
5 | 15 ~ 25 | 6 | ● | ● | 10 | 4.8 | 45 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
---|---|---|---|---|---|
Coating | For High Hardness (Silicone-Based) | Tolerance of OD(mm) | 0 ~ -0.02 |
Please check the type/dimensions/specifications of the part TSC-PEM2LB0.4-2 in the TSC series carbide long neck square end mill, 2-flute / long neck model series.
Part Number |
---|
TSC-EM2LB0.3-2 |
TSC-EM2LB0.3-3 |
TSC-EM2LB0.3-4 |
TSC-PEM2LB0.4-3 |
TSC-PEM2LB0.4-4 |
TSC-PEM2LB0.4-5 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 140.12 | 1 Piece(s) | Available | 4 Day(s) or more | 0.3 | 0.45 | 4 | 50 | 2 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
MYR 146.41 | 1 Piece(s) | Available | 4 Day(s) or more | 0.3 | 0.45 | 4 | 50 | 3 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
MYR 170.29 | 1 Piece(s) | Available | 4 Day(s) or more | 0.3 | 0.45 | 4 | 50 | 4 | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
MYR 82.39 | 1 Piece(s) | Available | 4 Day(s) or more | 0.4 | 0.6 | 4 | 50 | 3 | Inclined Cutting / Groove / Flat Surface / Side Surface | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
MYR 82.39 | 1 Piece(s) | Available | 4 Day(s) or more | 0.4 | 0.6 | 4 | 50 | 4 | Inclined Cutting / Groove / Flat Surface / Side Surface | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
MYR 82.39 | 1 Piece(s) | Available | 4 Day(s) or more | 0.4 | 0.6 | 4 | 50 | 5 | Inclined Cutting / Groove / Flat Surface / Side Surface | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.37 | 5.24 | 5.49 | 6.1 | 6.87 | 10° |
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Days to Ship : 2 Day(s) or more
MISUMI
Days to Ship : 2 Day(s) or more
MISUMI
Days to Ship : 4 Day(s) or more
MISUMI
Standard Price : MYR 244.91-
Days to Ship : 4 Day(s) or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy