(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
High-performance MRC series is available in the industry's largest number of sizes
- MR
- General Steel
- 2 Flutes
- S (Short)
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| LN-MRC-HBEM2S0.8-[8-20/1] |
| LN-MRC-HBEM2S0.9-[8-20/1] |
| LN-MRC-HBEM2S0.75-6-[8-23/1] |
| LN-MRC-HBEM2S0.75-[8-20/1] |
| LN-MRC-HBEM2S1-6-[8-24/1] |
| LN-MRC-HBEM2S1-[8-21/1] |
| LN-MRC-HBEM2S1.1-[8-24/1] |
| LN-MRC-HBEM2S1.2-[8-24/1] |
| LN-MRC-HBEM2S1.3-[9-24/1] |
| LN-MRC-HBEM2S1.4-[9-24/1] |
| LN-MRC-HBEM2S1.5-6-[9-36/1] |
| LN-MRC-HBEM2S1.5-[9-36/1] |
| LN-MRC-HBEM2S1.6-[9-26/1] |
| LN-MRC-HBEM2S1.7-[9-26/1] |
| LN-MRC-HBEM2S1.8-[10-26/1] |
| LN-MRC-HBEM2S1.9-[10-26/1] |
| LN-MRC-HBEM2S1.25-[9-22/1] |
| LN-MRC-HBEM2S1.75-[10-24/1] |
| LN-MRC-HBEM2S2-6-50-[11-28/1] |
| LN-MRC-HBEM2S2-6-[11-38/1] |
| LN-MRC-HBEM2S2-[11-28/1] |
| LN-MRC-HBEM2S2.2-[11-28/1] |
| LN-MRC-HBEM2S2.3-[11-28/1] |
| LN-MRC-HBEM2S2.4-[11-28/1] |
| LN-MRC-HBEM2S2.5-[13-30/1] |
| LN-MRC-HBEM2S2.15-[11-28/1] |
| MRC-HBEM2LB0.05-0.2 |
| MRC-HBEM2LB0.05-0.3 |
| MRC-HBEM2LB0.05-0.5 |
| MRC-HBEM2LB0.1-0.3 |
| MRC-HBEM2LB0.1-0.5 |
| MRC-HBEM2LB0.1-0.5-6 |
| MRC-HBEM2LB0.1-0.75 |
| MRC-HBEM2LB0.1-1 |
| MRC-HBEM2LB0.1-1-6 |
| MRC-HBEM2LB0.1-1.5 |
| MRC-HBEM2LB0.1-1.5-6 |
| MRC-HBEM2LB0.1-1.25 |
| MRC-HBEM2LB0.1-1.75 |
| MRC-HBEM2LB0.1-2 |
| MRC-HBEM2LB0.1-2-6 |
| MRC-HBEM2LB0.1-2.5 |
| MRC-HBEM2LB0.1-3 |
| MRC-HBEM2LB0.2-0.5 |
| MRC-HBEM2LB0.2-0.75 |
| MRC-HBEM2LB0.2-1 |
| MRC-HBEM2LB0.2-1-6 |
| MRC-HBEM2LB0.2-1.5 |
| MRC-HBEM2LB0.2-1.5-6 |
| MRC-HBEM2LB0.2-2 |
| MRC-HBEM2LB0.2-2-6 |
| MRC-HBEM2LB0.2-2.5 |
| MRC-HBEM2LB0.2-2.5-6 |
| MRC-HBEM2LB0.2-3 |
| MRC-HBEM2LB0.2-3-6 |
| MRC-HBEM2LB0.2-3.5 |
| MRC-HBEM2LB0.2-4 |
| MRC-HBEM2LB0.2-4-6 |
| MRC-HBEM2LB0.2-4.5 |
| MRC-HBEM2LB0.2-5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | R Size (mm) | Model | Work Material | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Coating | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Processing Applications | Inventory Classification | Outer Diameter D (mm) | Torsion Availability | Figure | Length Under Neck (θ) (Degree) | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 1° 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) or more | 0.8 | - | - | 3 | - | - | 50 | - | 4 | - | - | - | 1.6 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 0.9 | - | - | 3 | - | - | 50 | - | 4 | - | - | - | 1.8 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 0.75 | - | - | 3 | - | - | 50 | - | 6 | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 0.75 | - | - | 3 | - | - | 50 | - | 4 | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1 | - | - | 3 | - | - | 50 | - | 6 | - | - | - | 2 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1 | - | - | 3 | - | - | 50 | - | 4 | - | - | - | 2 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.1 | - | - | 3 | - | - | 50 | - | 4 | - | - | - | 2.2 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.2 | - | - | 3 | - | - | 50 | - | 4 | - | - | - | 2.4 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.3 | - | - | 3.5 | - | - | 50 | - | 4 | - | - | - | 2.6 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.4 | - | - | 3.5 | - | - | 50 | - | 4 | - | - | - | 2.8 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.5 | - | - | 4 | - | - | 60 | - | 6 | - | - | - | 3 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.5 | - | - | 4 | - | - | 60 | - | 4 | - | - | - | 3 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.6 | - | - | 4 | - | - | 50 | - | 4 | - | - | - | 3.2 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.7 | - | - | 4 | - | - | 50 | - | 4 | - | - | - | 3.4 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.8 | - | - | 5 | - | - | 50 | - | 4 | - | - | - | 3.6 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.9 | - | - | 5 | - | - | 50 | - | 4 | - | - | - | 3.8 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.25 | - | - | 3.5 | - | - | 60 | - | 6 | - | - | - | 2.5 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 1.75 | - | - | 5 | - | - | 50 | - | 4 | - | - | - | 3.5 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2 | - | - | 6 | - | - | 50 | - | 6 | - | - | - | 4 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2 | - | - | 6 | - | - | 70 | - | 6 | - | - | - | 4 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2 | - | - | 6 | - | - | 50 | - | 4 | - | - | - | 4 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2.2 | - | - | 6 | - | - | 50 | - | 6 | - | - | - | 4.4 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2.3 | - | - | 6 | - | - | 50 | - | 6 | - | - | - | 4.6 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2.4 | - | - | 6 | - | - | 50 | - | 6 | - | - | - | 4.8 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2.5 | - | - | 8 | - | - | 80 | - | 6 | - | - | - | 5 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | 2.15 | - | - | 6 | - | - | 50 | - | 6 | - | - | - | 4.3 | - | - | - | - | - | - | - | - | - | ||
MYR 250.01 | 1 Piece(s) | Available | 4 Day(s) or more | 0.05 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.07 | 2 | MRC | 50 | 0.2 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.1 | Included | 1 | 10° | 0.085 | 0.2 | 0.21 | 0.22 | 0.23 | 0.25 | |
MYR 237.77 | 1 Piece(s) | Available | 4 Day(s) or more | 0.05 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.07 | 2 | MRC | 50 | 0.3 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.1 | Included | 1 | 10° | 0.085 | 0.31 | 0.32 | 0.33 | 0.35 | 0.37 | |
MYR 256.51 | 1 Piece(s) | Available | 4 Day(s) or more | 0.05 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.07 | 2 | MRC | 50 | 0.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.1 | Included | 1 | 10° | 0.085 | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | |
MYR 193.13 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 0.3 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 0.31 | 0.32 | 0.33 | 0.35 | 0.37 | |
MYR 177.32 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 0.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | |
MYR 257.57 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 0.5 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 15° | 0.18 | 0.51 | 0.52 | 0.54 | 0.55 | 0.58 | |
MYR 168.91 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 0.75 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 0.78 | 0.81 | 0.84 | 0.88 | 0.94 | |
MYR 168.91 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 1 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | |
MYR 236.92 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 1 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 15° | 0.18 | 1.02 | 1.05 | 1.08 | 1.11 | 1.16 | |
MYR 186.40 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 1.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | |
MYR 255.66 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 1.5 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 15° | 0.18 | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | |
MYR 182.04 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 1.25 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 1.3 | 1.36 | 1.41 | 1.47 | 1.58 | |
MYR 200.67 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 1.75 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 1.82 | 1.9 | 1.98 | 2.05 | 2.21 | |
MYR 200.67 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 2 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | |
MYR 271.90 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 2 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 15° | 0.18 | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | |
MYR 195.68 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 2.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | |
MYR 234.07 | 1 Piece(s) | Available | 4 Day(s) or more | 0.1 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.15 | 2 | MRC | 50 | 3 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.2 | Included | 1 | 10° | 0.18 | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | |
MYR 117.49 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 0.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | |
MYR 121.20 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 0.75 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 0.78 | 0.81 | 0.84 | 0.88 | 0.94 | |
MYR 121.20 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 1 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | |
MYR 170.82 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 1 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 15° | 0.37 | 1.02 | 1.05 | 1.08 | 1.11 | 1.16 | |
MYR 121.20 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 1.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | |
MYR 158.58 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 1.5 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 15° | 0.37 | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | |
MYR 123.11 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 2 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | |
MYR 149.27 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 2 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 15° | 0.37 | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | |
MYR 126.54 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 2.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | |
MYR 174.35 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 2.5 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 15° | 0.37 | 2.57 | 2.64 | 2.71 | 2.78 | 2.92 | |
MYR 133.32 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 3 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | |
MYR 194.17 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 3 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 15° | 0.37 | 3.08 | 3.16 | 3.25 | 3.33 | 3.5 | |
MYR 143.64 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 3.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 3.65 | 3.8 | 3.96 | 4.11 | 4.42 | |
MYR 147.35 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 4 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 4.17 | 4.35 | 4.52 | 4.7 | 5.05 | |
MYR 244.09 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 4 | 6 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 15° | 0.37 | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | |
MYR 151.17 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 4.5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 4.69 | 4.89 | 5.09 | 5.29 | 5.69 | |
MYR 151.17 | 1 Piece(s) | Available | 4 Day(s) or more | 0.2 | Long Neck Bore | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | 0.3 | 2 | MRC | 50 | 5 | 4 | ±0.005 | Curved Surface / Side Surface / Carving / R-Groove | Stocked Product | 0.4 | Included | 1 | 10° | 0.37 | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 |
Loading...
Specifications
Model Number
MRC-HBEM2LB
| Tip R | Length Under Neck ℓ1 | Shank Diameter d | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | ||||
| 30′ | 1° | 1° 30' | 2° | 3° | ||||||||
| 0.05 | 0.2 | 4 | 0.07 | 0.085 | 50 | 10° | 0.20 | 0.21 | 0.22 | 0.23 | 0.25 | 1 |
| 0.3 | 0.31 | 0.32 | 0.33 | 0.35 | 0.37 | 1 | ||||||
| 0.5 | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | 1 | ||||||
| 0.1 | 0.3 | 4 | 0.15 | 0.18 | 50 | 10° | 0.31 | 0.32 | 0.33 | 0.35 | 0.37 | 1 |
| 0.5 | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | 1 | ||||||
| 0.5 | 6 | 15° | 0.51 | 0.52 | 0.54 | 0.55 | 0.58 | 1 | ||||
| 0.75 | 4 | 10° | 0.78 | 0.81 | 0.84 | 0.88 | 0.94 | 1 | ||||
| 1 | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | 1 | ||||||
| 1 | 6 | 15° | 1.02 | 1.05 | 1.08 | 1.11 | 1.16 | 1 | ||||
| 1.25 | 4 | 10° | 1.30 | 1.36 | 1.41 | 1.47 | 1.58 | 1 | ||||
| 1.5 | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | 1 | ||||||
| 1.5 | 6 | 15° | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | 1 | ||||
| 1.75 | 4 | 10° | 1.82 | 1.90 | 1.98 | 2.05 | 2.21 | 1 | ||||
| 2 | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | 1 | ||||||
| 2 | 6 | 15° | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | 1 | ||||
| 2.5 | 4 | 10° | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | 1 | ||||
| 3 | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||||
| 0.15 | 0.5 | 4 | 0.2 | 0.28 | 50 | 10° | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | 1 |
| 0.6 | 0.62 | 0.65 | 0.67 | 0.70 | 0.75 | 1 | ||||||
| 0.75 | 0.78 | 0.81 | 0.84 | 0.88 | 0.94 | 1 | ||||||
| 1 | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | 1 | ||||||
| 1 | 6 | 15° | 1.02 | 1.05 | 1.08 | 1.11 | 1.16 | 1 | ||||
| 1.25 | 4 | 10° | 1.30 | 1.36 | 1.41 | 1.47 | 1.58 | 1 | ||||
| 1.5 | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | 1 | ||||||
| 1.5 | 6 | 15° | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | 1 | ||||
| 1.75 | 4 | 10° | 1.82 | 1.90 | 1.98 | 2.05 | 2.21 | 1 | ||||
| 2 | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | 1 | ||||||
| 2 | 6 | 15° | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | 1 | ||||
| 2.25 | 4 | 10° | 2.34 | 2.44 | 2.54 | 2.64 | 2.84 | 1 | ||||
| 2.5 | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | 1 | ||||||
| 2.5 | 6 | 15° | 2.57 | 2.64 | 2.71 | 2.78 | 2.92 | 1 | ||||
| 2.75 | 4 | 10° | 2.87 | 2.99 | 3.11 | 3.23 | 3.47 | 1 | ||||
| 3 | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||||
| 3 | 6 | 15° | 3.08 | 3.16 | 3.25 | 3.33 | 3.50 | 1 | ||||
| 3.5 | 4 | 10° | 3.65 | 3.80 | 3.96 | 4.11 | 4.42 | 1 | ||||
| 4 | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||||
| 4.5 | 4.69 | 4.89 | 5.09 | 5.29 | 5.69 | 1 | ||||||
| 5 | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 | 1 | ||||||
| 0.2 | 0.5 | 4 | 0.3 | 0.37 | 50 | 10° | 0.52 | 0.54 | 0.56 | 0.58 | 0.63 | 1 |
| 0.75 | 0.78 | 0.81 | 0.84 | 0.88 | 0.94 | 1 | ||||||
| 0.2 | 1 | 4 | 0.3 | 0.37 | 50 | 10° | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | 1 |
| 1 | 6 | 15° | 1.02 | 1.05 | 1.08 | 1.11 | 1.16 | 1 | ||||
| 1.5 | 4 | 10° | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | 1 | ||||
| 1.5 | 6 | 15° | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | 1 | ||||
| 2 | 4 | 10° | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | 1 | ||||
| 2 | 6 | 15° | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | 1 | ||||
| 2.5 | 4 | 10° | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | 1 | ||||
| 2.5 | 6 | 15° | 2.57 | 2.64 | 2.71 | 2.78 | 2.92 | 1 | ||||
| 3 | 4 | 10° | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||
| 3 | 6 | 15° | 3.08 | 3.16 | 3.25 | 3.33 | 3.50 | 1 | ||||
| 3.5 | 4 | 10° | 3.65 | 3.80 | 3.96 | 4.11 | 4.42 | 1 | ||||
| 4 | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||||
| 4 | 6 | 15° | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | 1 | ||||
| 4.5 | 4 | 10° | 4.69 | 4.89 | 5.09 | 5.29 | 5.69 | 1 | ||||
| 5 | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 | 1 | ||||||
| 5 | 6 | 15° | 5.14 | 5.28 | 5.42 | 5.56 | 5.84 | 1 | ||||
| 5.5 | 4 | 10° | 5.74 | 5.98 | 6.22 | 6.46 | 6.95 | 1 | ||||
| 6 | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 0.25 | 1 | 4 | 0.35 | 0.46 | 50 | 10° | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | 1 |
| 1.5 | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | 1 | ||||||
| 1.5 | 6 | 15° | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | 1 | ||||
| 2 | 4 | 10° | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | 1 | ||||
| 2 | 6 | 15° | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | 1 | ||||
| 2.5 | 4 | 10° | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | 1 | ||||
| 2.5 | 6 | 15° | 2.57 | 2.64 | 2.71 | 2.78 | 2.92 | 1 | ||||
| 3 | 4 | 10° | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||
| 3 | 6 | 15° | 3.08 | 3.16 | 3.25 | 3.33 | 3.50 | 1 | ||||
| 3.5 | 4 | 10° | 3.65 | 3.80 | 3.96 | 4.11 | 4.42 | 1 | ||||
| 4 | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||||
| 4 | 6 | 15° | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | 1 | ||||
| 4.5 | 4 | 10° | 4.69 | 4.89 | 5.09 | 5.29 | 5.69 | 1 | ||||
| 5 | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 | 1 | ||||||
| 5 | 6 | 15° | 5.14 | 5.28 | 5.42 | 5.56 | 5.84 | 1 | ||||
| 5.5 | 4 | 10° | 5.74 | 5.98 | 6.22 | 6.46 | 6.95 | 1 | ||||
| 6 | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 7 | 4 | 10° | 7.30 | 7.61 | 7.92 | 8.23 | 8.85 | 1 | ||||
| 8 | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 9 | 4 | 10° | 9.39 | 9.79 | 10.19 | 10.58 | 11.38 | 1 | ||||
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 0.3 | 1 | 4 | 0.45 | 0.56 | 50 | 10° | 1.04 | 1.08 | 1.13 | 1.17 | 1.26 | 1 |
| 1.5 | 1.56 | 1.63 | 1.69 | 1.76 | 1.89 | 1 | ||||||
| 1.5 | 6 | 15° | 1.54 | 1.58 | 1.62 | 1.66 | 1.75 | 1 | ||||
| 2 | 4 | 10° | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | 1 | ||||
| 2 | 6 | 15° | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | 1 | ||||
| 2.5 | 4 | 10° | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | 1 | ||||
| 2.5 | 6 | 15° | 2.57 | 2.64 | 2.71 | 2.78 | 2.92 | 1 | ||||
| 3 | 4 | 10° | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||
| 3 | 6 | 15° | 3.08 | 3.16 | 3.25 | 3.33 | 3.50 | 1 | ||||
| 3.5 | 4 | 10° | 3.65 | 3.80 | 3.96 | 4.11 | 4.42 | 1 | ||||
| 4 | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||||
| 4 | 6 | 15° | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | 1 | ||||
| 4.5 | 4 | 10° | 4.69 | 4.89 | 5.09 | 5.29 | 5.69 | 1 | ||||
| 5 | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 | 1 | ||||||
| 5 | 6 | 15° | 5.14 | 5.28 | 5.42 | 5.56 | 5.84 | 1 | ||||
| 5.5 | 4 | 10° | 5.74 | 5.98 | 6.22 | 6.46 | 6.95 | 1 | ||||
| 6 | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 6.5 | 4 | 10° | 6.78 | 7.07 | 7.35 | 7.64 | 8.22 | 1 | ||||
| 7 | 7.30 | 7.61 | 7.92 | 8.23 | 8.85 | 1 | ||||||
| 7.5 | 7.83 | 8.16 | 8.49 | 8.82 | 9.48 | 1 | ||||||
| 8 | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 8.5 | 4 | 10° | 8.87 | 9.24 | 9.62 | 9.99 | 10.74 | 1 | ||||
| 0.3 | 9 | 4 | 0.45 | 0.56 | 50 | 10° | 9.39 | 9.79 | 10.19 | 10.58 | 11.38 | 1 |
| 9.5 | 9.91 | 10.33 | 10.75 | 11.17 | 12.01 | 1 | ||||||
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 10 | 6 | 15° | 10.28 | 10.56 | 10.84 | 11.12 | 11.68 | 1 | ||||
| 11 | 4 | 10° | 11.48 | 11.96 | 12.45 | 12.93 | 13.91 | 1 | ||||
| 12 | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||||
| 0.4 | 2 | 4 | 0.6 | 0.76 | 50 | 10° | 2.08 | 2.17 | 2.26 | 2.35 | 2.52 | 1 |
| 2 | 6 | 15° | 2.05 | 2.11 | 2.16 | 2.22 | 2.33 | 1 | ||||
| 3 | 4 | 10° | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||
| 3 | 6 | 15° | 3.08 | 3.16 | 3.25 | 3.33 | 3.50 | 1 | ||||
| 4 | 4 | 10° | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||
| 4 | 6 | 15° | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | 1 | ||||
| 5 | 4 | 10° | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 | 1 | ||||
| 5 | 6 | 15° | 5.14 | 5.28 | 5.42 | 5.56 | 5.84 | 1 | ||||
| 6 | 4 | 10° | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 7 | 4 | 10° | 7.30 | 7.61 | 7.92 | 8.23 | 8.85 | 1 | ||||
| 8 | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 9 | 4 | 10° | 9.39 | 9.79 | 10.19 | 10.58 | 11.38 | 1 | ||||
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 10 | 6 | 15° | 10.28 | 10.56 | 10.84 | 11.12 | 11.68 | 1 | ||||
| 12 | 4 | 10° | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||
| 0.5 | 2.5 | 4 | 0.75 | 0.95 | 50 | 10° | 2.61 | 2.72 | 2.83 | 2.94 | 3.16 | 1 |
| 3 | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 | ||||||
| 3 | 6 | 15° | 3.08 | 3.16 | 3.25 | 3.33 | 3.50 | 1 | ||||
| 4 | 4 | 10° | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||
| 4 | 6 | 15° | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | 1 | ||||
| 5 | 4 | 10° | 5.22 | 5.44 | 5.66 | 5.88 | 6.32 | 1 | ||||
| 5 | 6 | 15° | 5.14 | 5.28 | 5.42 | 5.56 | 5.84 | 1 | ||||
| 6 | 4 | 10° | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 7 | 4 | 10° | 7.30 | 7.61 | 7.92 | 8.23 | 8.85 | 1 | ||||
| 7 | 6 | 15° | 7.19 | 7.39 | 7.58 | 7.78 | 8.17 | 1 | ||||
| 8 | 4 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 9 | 4 | 10° | 9.39 | 9.79 | 10.19 | 10.58 | 11.38 | 1 | ||||
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 10 | 6 | 15° | 10.28 | 10.56 | 10.84 | 11.12 | 11.68 | 1 | ||||
| 12 | 4 | 10° | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||
| 12 | 6 | 15° | 12.33 | 12.67 | 13.00 | 13.34 | 14.01 | 1 | ||||
| 14 | 4 | 10° | 14.61 | 15.23 | 15.85 | 16.46 | 17.70 | 1 | ||||
| 14 | 6 | 15° | 14.39 | 14.78 | 15.17 | 15.56 | 16.35 | 1 | ||||
| 16 | 4 | 10° | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||
| 16 | 6 | 70 | 15° | 16.44 | 16.89 | 17.34 | 17.79 | 18.68 | 1 | |||
| 18 | 4 | 10° | 18.79 | 19.58 | 20.38 | 21.17 | 22.76 | 1 | ||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 20 | 6 | 15° | 20.56 | 21.12 | 21.68 | 22.24 | 23.36 | 1 | ||||
| 22 | 6 | 15° | 22.61 | 23.23 | 23.84 | 24.46 | 25.69 | 1 | ||||
| 0.6 | 4 | 4 | 0.9 | 1.15 | 50 | 10° | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 |
| 6 | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 8 | 4 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 10 | 4 | 10° | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||
| 10 | 6 | 15° | 10.28 | 10.56 | 10.84 | 11.12 | 11.68 | 1 | ||||
| 12 | 4 | 10° | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||
| 12 | 6 | 15° | 12.33 | 12.67 | 13.00 | 13.34 | 14.01 | 1 | ||||
| 14 | 4 | 10° | 14.61 | 15.23 | 15.85 | 16.46 | 17.70 | 1 | ||||
| 16 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||||
| 16 | 6 | 70 | 15° | 16.44 | 16.89 | 17.34 | 17.79 | 18.68 | 1 | |||
| 18 | 4 | 10° | 18.79 | 19.58 | 20.38 | 21.17 | 22.76 | 1 | ||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 24 | 25.05 | 26.11 | 27.17 | 28.23 | 30.35 | 1 | ||||||
| 0.7 | 8 | 4 | 1 | 1.35 | 50 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 |
| 12 | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||||
| 0.7 | 16 | 4 | 1 | 1.35 | 70 | 10° | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 |
| 0.75 | 3 | 4 | 1.1 | 1.45 | 50 | 10° | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 |
| 4 | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||||
| 6 | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 8 | 4 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 10 | 4 | 10° | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||
| 10 | 6 | 15° | 10.28 | 10.56 | 10.84 | 11.12 | 11.68 | 1 | ||||
| 12 | 4 | 10° | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||
| 12 | 6 | 15° | 12.33 | 12.67 | 13.00 | 13.34 | 14.01 | 1 | ||||
| 14 | 4 | 10° | 14.61 | 15.23 | 15.85 | 16.46 | 17.70 | 1 | ||||
| 16 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||||
| 16 | 6 | 70 | 15° | 16.44 | 16.89 | 17.34 | 17.79 | 18.68 | 1 | |||
| 18 | 4 | 10° | 18.79 | 19.58 | 20.38 | 21.17 | 22.76 | 1 | ||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 20 | 6 | 15° | 20.56 | 21.12 | 21.68 | 22.24 | 23.36 | 1 | ||||
| 22 | 4 | 10° | 22.96 | 23.93 | 24.90 | 25.87 | 27.82 | 1 | ||||
| 30 | 31.32 | 32.64 | 33.96 | 35.29 | Without Interference | 1 | ||||||
| 0.8 | 4 | 4 | 1.2 | 1.55 | 50 | 10° | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 |
| 8 | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||||
| 12 | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||||
| 16 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 0.9 | 8 | 4 | 1.3 | 1.75 | 50 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 |
| 12 | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||||
| 16 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 1 | 3 | 4 | 1.5 | 1.95 | 50 | 10° | 3.13 | 3.26 | 3.39 | 3.52 | 3.79 | 1 |
| 4 | 4.17 | 4.35 | 4.52 | 4.70 | 5.05 | 1 | ||||||
| 4 | 6 | 15° | 4.11 | 4.22 | 4.33 | 4.44 | 4.67 | 1 | ||||
| 6 | 4 | 10° | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | ||||
| 6 | 6 | 15° | 6.16 | 6.33 | 6.50 | 6.67 | 7.00 | 1 | ||||
| 8 | 4 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||
| 8 | 6 | 15° | 8.22 | 8.44 | 8.67 | 8.89 | 9.34 | 1 | ||||
| 10 | 4 | 10° | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||
| 10 | 6 | 15° | 10.28 | 10.56 | 10.84 | 11.12 | 11.68 | 1 | ||||
| 12 | 4 | 10° | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||
| 12 | 6 | 15° | 12.33 | 12.67 | 13.00 | 13.34 | 14.01 | 1 | ||||
| 14 | 4 | 10° | 14.61 | 15.23 | 15.85 | 16.46 | 17.70 | 1 | ||||
| 16 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||||
| 16 | 6 | 70 | 15° | 16.44 | 16.89 | 17.34 | 17.79 | 18.68 | 1 | |||
| 18 | 4 | 10° | 18.79 | 19.58 | 20.38 | 21.17 | 22.76 | 1 | ||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 20 | 6 | 15° | 20.56 | 21.12 | 21.68 | 22.24 | 23.36 | 1 | ||||
| 22 | 4 | 10° | 22.96 | 23.93 | 24.90 | 25.87 | Without Interference | 1 | ||||
| 25 | 26.10 | 27.20 | 28.30 | 29.40 | Without Interference | 1 | ||||||
| 25 | 6 | 110 | 15° | 25.70 | 26.40 | 27.10 | 27.80 | 29.20 | 1 | |||
| 30 | 4 | 70 | 10° | 31.32 | 32.64 | 33.96 | 35.29 | Without Interference | 1 | |||
| 30 | 6 | 110 | 15° | 30.84 | 31.68 | 32.52 | 33.36 | 35.04 | 1 | |||
| 35 | 4 | 10° | 36.54 | 38.08 | 39.62 | Without Interference | Without Interference | 1 | ||||
| 35 | 6 | 15° | 35.98 | 36.96 | 37.94 | 38.92 | 40.88 | 1 | ||||
| 40 | 4 | 10° | 41.76 | 43.52 | 45.29 | Without Interference | Without Interference | 1 | ||||
| 40 | 6 | 15° | 51.40 | 52.80 | 54.20 | 55.60 | Without Interference | 1 | ||||
| 50 | 4 | 10° | 41.76 | 43.52 | 45.29 | Without Interference | Without Interference | 1 | ||||
| 1.25 | 8 | 4 | 2.3 | 2.4 | 50 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 |
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 15 | 15.66 | 16.32 | 16.98 | 17.64 | 18.96 | 1 | ||||||
| 20 | 70 | 20.88 | 21.76 | 22.64 | 23.52 | Without Interference | 1 | |||||
| 25 | 26.10 | 27.20 | 28.30 | Without Interference | Without Interference | 1 | ||||||
| 30 | 31.32 | 32.64 | 33.96 | Without Interference | Without Interference | 1 | ||||||
| 35 | 36.54 | 38.08 | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 1.5 | 6 | 4 | 2.4 | 2.9 | 60 | 10° | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 |
| 6 | 6 | 6.26 | 6.52 | 6.79 | 7.05 | 7.58 | 1 | |||||
| 8 | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||||
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 12 | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||||
| 1.5 | 14 | 6 | 2.4 | 2.9 | 60 | 10° | 14.61 | 15.23 | 15.85 | 16.46 | 17.70 | 1 |
| 15 | 15.66 | 16.32 | 16.98 | 17.64 | 18.96 | 1 | ||||||
| 16 | 70 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | |||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 25 | 26.10 | 27.20 | 28.30 | 29.40 | 31.61 | 1 | ||||||
| 30 | 31.32 | 32.64 | 33.96 | 35.29 | 37.93 | 1 | ||||||
| 35 | 110 | 36.54 | 38.08 | 39.62 | 41.17 | Without Interference | 1 | |||||
| 40 | 41.76 | 43.52 | 45.29 | 47.05 | Without Interference | 1 | ||||||
| 50 | 52.20 | 54.40 | 56.61 | Without Interference | Without Interference | 1 | ||||||
| 1.75 | 10 | 6 | 3.5 | 3.35 | 50 | 10° | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 |
| 15 | 70 | 15.66 | 16.32 | 16.98 | 17.64 | 18.96 | 1 | |||||
| 20 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | ||||||
| 25 | 26.10 | 27.20 | 28.30 | 29.40 | 31.61 | 1 | ||||||
| 30 | 31.32 | 32.64 | 33.96 | 35.29 | Without Interference | 1 | ||||||
| 35 | 110 | 36.54 | 38.08 | 39.62 | 41.17 | Without Interference | 1 | |||||
| 40 | 41.76 | 43.52 | 45.29 | 47.05 | Without Interference | 1 | ||||||
| 45 | 46.98 | 48.96 | 50.95 | Without Interference | Without Interference | 1 | ||||||
| 2 | 8 | 4 | 4 | 3.85 | 65 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 8 | 6 | 10° | 8.35 | 8.70 | 9.05 | 9.41 | 10.11 | 1 | ||||
| 10 | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 | ||||||
| 12 | 12.52 | 13.05 | 13.58 | 14.11 | 15.17 | 1 | ||||||
| 14 | 14.61 | 15.23 | 15.85 | 16.46 | 17.70 | 1 | ||||||
| 15 | 15.66 | 16.32 | 16.98 | 17.64 | 18.96 | 1 | ||||||
| 16 | 16.70 | 17.41 | 18.11 | 18.82 | 20.23 | 1 | ||||||
| 20 | 70 | 20.88 | 21.76 | 22.64 | 23.52 | 25.29 | 1 | |||||
| 25 | 26.10 | 27.20 | 28.30 | 29.40 | Without Interference | 1 | ||||||
| 30 | 31.32 | 32.64 | 33.96 | 35.29 | Without Interference | 1 | ||||||
| 35 | 110 | 36.54 | 38.08 | 39.62 | Without Interference | Without Interference | 1 | |||||
| 40 | 41.76 | 43.52 | 45.29 | Without Interference | Without Interference | 1 | ||||||
| 45 | 46.98 | 48.96 | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 50 | 52.20 | 54.40 | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 60 | 62.64 | 65.28 | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 2.5 | 10 | 6 | 5 | 4.85 | 70 | 10° | 10.44 | 10.88 | 11.32 | 11.76 | 12.64 | 1 |
| 15 | 15.66 | 16.32 | 16.98 | 17.64 | Without Interference | 1 | ||||||
| 20 | 20.88 | 21.76 | 22.64 | Without Interference | Without Interference | 1 | ||||||
| 25 | 26.10 | 27.20 | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 30 | 31.32 | 32.64 | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 35 | 110 | 36.54 | Without Interference | Without Interference | Without Interference | Without Interference | 1 | |||||
| 40 | 41.76 | Without Interference | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 45 | 46.98 | Without Interference | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 50 | 52.20 | Without Interference | Without Interference | Without Interference | Without Interference | 1 | ||||||
| 3 | 10 | 6 | 6 | 5.85 | 70 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 20 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
| 25 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
| 30 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
| 35 | 110 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | ||||
| 40 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
| 45 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
| 50 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
| 60 | - | Without Interference | Without Interference | Without Interference | Without Interference | Without Interference | 2 | |||||
For Cutting Conditions, Refer to >>Click here.
More Information
[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.
Specification/Dimensions
-
R Size(mm)
-
Model
- Long Neck Bore
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- High-Hardness Steel ~ HRC60
- High-Hardness Steel – HRC65
- Stainless Steel
- Cast Iron
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Coating
- MRC
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
R Precision(μm)
-
Processing Applications
- Curved Surface
- Side Surface
- Carving
- R-Groove
-
Inventory Classification
- Stocked Product
-
type
- LN-MRC-HBEM2S
- MRC-HBEM2LB
Days to Ship
-
- All
- 4 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)
- Long Neck for Copper Work, Ball CURIBR
- Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD
- Long Neck Ball Type, 2-Flute FX-LN-EBD-6
- DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill
- Diamond Ball Mill DCRE
- SSPBL220 CBN Super Spiral Long Neck Ball End Mill
- MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing)
Customers Who Viewed This Item Also Viewed
-
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular ModelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck modelMISUMI
Standard Price : MYR 172.60-
Days to Ship : 4 Day(s) or more
-
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck ModelMISUMI
Days to Ship : 2 Day(s) or more
-
TSC series carbide long neck square end mill, 2-flute / long neck modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) modelMISUMI
Days to Ship : 2 Day(s) or more
-
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short ModelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide long neck radius end mill, 4-flute / long neck modelMISUMI
Days to Ship : 4 Day(s) or more
-
TSC series carbide long neck radius end mill, 2-flute, long neck modelMISUMI
Days to Ship : 4 Day(s) or more
-
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck ModelMISUMI
Days to Ship : 4 Day(s) or more
-
-
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length modelMISUMI
Days to Ship : 4 Day(s) or more
-
(Economy series) XAL series carbide radius end mill, 2-flute / short modelMISUMI
Standard Price : MYR 87.64-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy