Lets you tighten the tube by hand tightening only.
(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Minimal Fitting, Tightening Straight
[Features]
· Optimal for piping used in vacuum equipment via combination with vacuum tubing.
· Ideal for small equipment and space saved piping.
Japanese Only
Do You Have Problems Like These?
- Problem 1
- I need a fitting that lets me easily tighten the tube
- Problem 2
- I need a fitting that enables space-saving piping
- Minimal Fitting - Compression Type Straight solves your problems.
- Solution 1:
- Minimal Fitting - Compression Type Straight lets you tighten the tube by hand tightening only.
- Solution 2:
- This compact fitting enables space-saving piping, making it ideal for small equipment.
How To Attach And Detach The Connecting Part
■ How to attach and detach the tube
1. Attaching the tube
Insert the tube through the cap nut up to the barb base. Then, tighten the cap nut over the tube by hand until it touches the metal body.
2. Detaching the tube
To remove the tube, manually remove the cap nut. Then remove the tube.
Whenever detaching the tube, be sure to turn off the air before proceeding.
■ How to tighten the screws
There are two ways to tighten the screws: by tightening the outer hexagon with a wrench, or by using a straight-slot screwdriver in the groove on the top of the hexagon (this lets you minimize the space between fittings).
Also refer to the table below when tightening the screws.
Tightening the outer hexagon
Tightening the groove-section on the top surface
■ Recommended tightening torque, sealock color and gasket material
| Screw Type | Thread size | Tightening Torque | Sealock Color | Gasket Material |
|---|---|---|---|---|
| Metric Thread | M3×0.5 | 0.7 N·m | - | SUS304 NBR |
| M5×0.8 | 1.0 to 1.5 N·m | |||
| M6×1 | 2 to 2.7 N·m | |||
| M3×0.5 | 0.5 to 0.6 N·m | POM | ||
| M5×0.8 | 1 to 1.5 N·m | |||
| M6×0.75 | 0.8 to 1 N·m | |||
| M8×0.75 | 1 to 2 N·m | |||
| Taper Pipe Thread | R1/8 | 7 to 9 N·m | White | - |
| R1/4 | 12 to 14 N·m | |||
| R3/8 | 22 to 24 N·m | |||
| R1/2 | 28 to 30 N·m | |||
| Unified Thread | No. 10 to 32 UNF | 1.0 to 1.5 N·m | - | SUS304, NBR |
| Tapered Thread For General US Pipes | 1/16 to 27 NPT | 7 to 9 N·m | White | - |
| 1/8 to 27 NPT | 7 to 9 N·m | |||
| 1/4 to 18 NPT | 12 to 14 N·m | |||
| 3/8 to 18 NPT | 22 to 24 N·m | |||
| 1/2 to 14 NPT | 28 to 30 N·m |
Ideal for small equipment and space-saving piping.
Metric thread
Taper pipe thread
The Minimal Fitting - Compression Type Straight is compact, making it ideal for small equipment and space-saving piping.
Refer to the table below for the size of each model number.
*Numbers in parentheses are for the clean room packaging specification
Unit: mm
| Format | LCN-0320-M3 | LCN-0320-M5 | LCN-0320-01 | LCN-0425-M5 | LCN-0425-01 | LCN-0640-M5 | LCN-0640-01 |
|---|---|---|---|---|---|---|---|
| Tube Outer Diameter × Internal Diameter øD | 3 × 2 | 4 × 2.5 | 6 × 4 | ||||
| R | M3×0.5 | M5×0.8 | R1/8 | M5×0.8 | R1/8 | M5×0.8 | R1/8 |
| A | 2.5 (2.2) | 3 (3.2) | 8 | 3 (2.2) | 8 | 3 (3.2) | 8 |
| G | 0.5 (0.8) | 0.5 (0.3) | - | 0.5 (0.3) | - | 0.5 (0.3) | - |
| C | 4 | 5 | 5.5 | ||||
| B | 12 | 12.5 | 19 | 14.5 | 20.5 | 15 | 21 |
| L1 | 9.5 (9.8) | 9.5 (9.3) | 15 | 11.5 (11.3) | 16.5 | 12 (11.8) | 17 |
| L2 | 7 | 8.5 | 9 | ||||
| L3 | 6 | 7 | 7.5 | ||||
| øP | 5 | 6.5 | 8 | ||||
| Hex H | 5.5 | 7 | 10 | 7 | 10 | 8 | 10 |
| Mass (g) | 1.2 | 1.9 | 7.5 | 2.5 | 7.9 | 3.4 | 8.9 |
| Effective Cross-Sectional Area | 0.9 | 2.0 | 3.8 | ||||
Compatible Sizes
Tube size
Millimeter size: ø3 × ø2 (outer diameter 3 × internal diameter 2 mm), ø4 × ø2.5 (outer diameter 4 × internal diameter 2.5 mm), ø5 × ø3 (outer diameter 5 × internal diameter 3 mm), ø6 × ø4 (outer diameter 6 × internal diameter 4 mm)
Thread size
Metric male thread: M3 × 0.5, M5 × 0.8, M6 × 1
Taper pipe male thread: R1/8
Metric female thread: M3 × 0.5, M5 × 0.8
| Part Number |
|---|
| LCN-0320-01 |
| LCN-0320-M3 |
| LCN-0320-M5 |
| LCN-0425-01 |
| LCN-0425-M5 |
| LCN-0640-01 |
| LCN-0640-M5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Material | Screw Types | Nominal of Thread | Tube O.D. (mm) D (Ø) | Tube I.D. (Ø) | Screw Pitch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 9.20 | 1 Piece(s) | 4 Day(s) or more | - | Brass | R | 1/8 | 3 | 2 | - | ||
MYR 12.26 | 1 Piece(s) | 1 Day(s) | - | Stainless Steel or Free-Cutting Steel | M | M3 | 3 | 2 | 0.5 | ||
MYR 5.36 | 1 Piece(s) | 1 Day(s) | - | Brass | M | M5 | 3 | 2 | 0.8 | ||
MYR 6.63 | 1 Piece(s) | 2 Day(s) | - | Brass | R | 1/8 | 4 | 2.5 | - | ||
MYR 6.16 | 1 Piece(s) | 1 Day(s) | 10 | - | - | - | - | - | - | ||
MYR 7.42 | 1 Piece(s) | 2 Day(s) | 10 | Brass | R | 1/8 | 6 | 4 | - | ||
MYR 6.16 | 1 Piece(s) | 1 Day(s) | 10 | - | - | - | - | - | - |
Loading...
Basic Information
| Connection Types | Screw⇔Tube Connection | Screw <=> Tube Connection Shape | Tightening Straight | Surface Treatment | Electroless Nickel Plating |
|---|---|---|---|---|---|
| Package Specifications | Standard Specifications |
Specification/Dimensions
-
Material
-
Screw Types
- R
- M
-
Nominal of Thread
-
Tube O.D. (mm) D(Ø)
-
Tube I.D.(Ø)
-
type
- LCN
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Auxiliary Equipment TAC Fitting BF N Series
- Auxiliary Equipment TAC Fitting UEF U Series
- Barb Elbow For Nylon Tubes M-5ALN-4, -6 - Barb Elbow For Soft Tubes M-5ALU-3, -4, -6
- Extension Fitting M-5J Miniature Fitting
- Universal Elbow 10-M-3UL Mini Fitting
- Hose Elbow 10-MS-5HLH-4, -6 Mini Fitting
- Bushing 10-MS-5B Mini Fitting
- Gasket
Customers Who Viewed This Item Also Viewed
-
Minimal Fitting Tightening Universal ElbowPISCO
Standard Price : MYR 14.82-
Days to Ship : 1 Day(s) or more
-
-
Minimal Fitting, Minimal Universal ElbowPISCO
Standard Price : MYR 9.17-
Days to Ship : 1 Day(s) or more
-
-
-
Brass Tightening Fitting - Straight - for Sputtering ResistancePISCO
Standard Price : MYR 11.12-
Days to Ship : 1 Day(s) or more
-
Miniature Couplings - Hose NipplesMISUMI
Standard Price : MYR 5.88-
Days to Ship : 1 Day(s) or more
-
-
Auxiliary Equipment TAC Fittings for Urethane Tubes Clamp Fittings/Barbed FittingsKOGANEI
Standard Price : MYR 36.46-
Days to Ship : 4 Day(s) or more
-
Bamboo Shoot Fitting Series Barb Type ConnectorNITTA
Standard Price : MYR 5.33-
Days to Ship : 5 Day(s) or more
-
-
Minimal Fitting, Minimal Different Diameter NipplePISCO
Standard Price : MYR 5.75-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy