(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Hit Hose (HB-820)
A lightweight urethane hose. Ideal for moving-air tools. Features excellent cold resistance and is soft and easy to handle, even in the winter.
Japanese Only
Drawing
Product Specifications
| Application | Hoses for various air tools (Impact wrenches, air drivers, spray guns, etc.) | ||
|---|---|---|---|
| Fluid | Air | ||
| Main material | Polyurethane resin | Reinforcements | Polyester thread |
| Function | No need for separate disposal: Very good, Oil resistant: Good, Flexibility: Good, Pneumatic transmission: Very good | ||
| Operating temperature range | -20°C to 60°C (HS-5 only -20 to 30°C) | ||
| Inner Diameter | 5 to 10 mm | ||
| Coloring | White, red, green, blue | ||
Standard Table
| Part Number | I.D.×O.D. | Operating pressure | Operating temperature range | Standard size weight | Standard scale | Minimum bending radius | Packaging | Coloring |
|---|---|---|---|---|---|---|---|---|
| mm | Mpa | °C | Kg / volume | m | mm | |||
| HS-5 | 5 × 8 | 0 to 0.7 | -20 to 30 | 4.0 | 100 | 30 | Bobbin reel | White |
| HB-6 | 6.5 × 10 | 0 to 1.5 | -20 to 60 | 6.0 | 100 | 40 | Bobbin reel | Red, blue |
| HB-610 | 0.6 | 10 | Film roll | Red | ||||
| HB-620 | 1.2 | 20 | ||||||
| HB-630 | 1.8 | 30 | ||||||
| HB-650 | 3.0 | 50 | ||||||
| HB-7 | 7 × 10 | 0 to 1.0 | 6.0 | 100 | 50 | Bobbin reel | Green | |
| HB-8 | 8.5 × 12.5 | 0 to 1.5 | 9.0 | 100 | 55 | Bobbin reel | Red, blue | |
| HB-810 | 0.9 | 10 | Film roll | Red | ||||
| HB-820 | 1.8 | 20 | ||||||
| HB-830 | 2.7 | 30 | ||||||
| HB-10 | 10 × 14.5 | 11.5 | 100 | 70 | Bobbin reel | Blue |
Product Features Details
Advantages of use 1
- Lightweight makes it ideal for mobile air tools.
- High oil resistance compared to rubber hoses or PVC hoses, long lifespan without hardening or cracking due to oil.
Advantages of use 2
- High cold resistance allows work without hardening even in winter, improving workability.
Compliant with laws and regulations to ensure safe and secure.
- Compliant with revised RoHS2 regulations.
Improved productivity and safety with dedicated fittings.
- Various types of dedicated fittings are easy to install, prevent fluid leakage and hose disconnection for safe and secure.
Cautions/Prohibitions
1. The operating fluid used is dedicated for air. Do not use the hose for any other purpose.
* Do not use it for fuel oil (heavy oil, light oil, kerosene, gasoline, etc.) or solvents.
2. Do not use it for drinking or food.
3. It is expected that the compounding agent, etc., may be extracted or eluted from the hose depending on the conditions of use, so check the usage conditions and the effect on the product before use.
4. Use the hose within the operating temperature range.
5. Use the hose within the working pressure range.
6. This hose should be used with a minimum bending radius or greater. If used below the minimum bending radius, the hose may bend, or the pressure resistance may decrease.
7. Do not directly touch or approach open flames.
8. When cutting the hose, make sure to cut it so that the end face is vertical. If it is not vertical, leakage or disconnection may occur.
9. Use a hose nipple suitable for the hose size. Do not use nipples with scratches or rust on their surface.
10. The use of hose fittings and hose clamps dedicated for Toyox is recommended. If you do not use the Toyox dedicated products, air may leak or the metal fittings may come off. Retighten the hose
clamp as necessary.
Distortion of the resin in the clamp-tightening area may cause air leakage or hose disconnection. Do not overtighten steel wire, etc., as it may cut the inner and outer surfaces of the hose and cause the hose to burst.
11. Do not use one-push metal fittings for tubes. It may cause the hose to burst.
12. The lifespan of the hose is greatly susceptible to the physical properties of the fluid, temperature, flow rate, frequency of pressurization and depressurization.
If any of the following abnormalities or signs of abnormalities are found during pre-startup or periodic inspections, stop using the product immediately and have it repaired or replaced with a new hose.
·Abnormality near the metal fittings: Local stretching, curvature, leaks, blisters, shallow insertion into nipples
·Presence or absence of scratch: Large scratches and cracks on the outer surface, immersion into the reinforcement layer
·Inner surface abnormality: Inner surface swelling and separation and wear (exposed reinforcement in the hose)
(*) In the case of abnormalities on the inner or outer surface, the fluid may contain hose separations or fragments of reinforcement material.
·Other significant changes (hardening, swelling, cracking, blistering, etc.)
13. Do not store it outdoors or in direct sunlight. This may cause quality deterioration such as stickiness and cracks on the hose surface.
Store in a well-ventilated place with low humidity. Do not allow contaminants or dust to enter the hose.
14. Do not incinerate. Burning the product may damage the incinerator or produce gas harmful to the human body. Please handle it as industrial waste.
15. When disposing the product, follow the separate disposal procedures of each region.
Product Comparison Information
Dedicated fitting
| Hose Product number | Hose Size | Hit-dedicated metal fittings | Single-action joint (easy joint) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Internal diameter | Outer diameter | Rotating metal fitting female With spring | Rotating metal fitting female | Fixing bracket male | Fixing bracket female | Lock Socket | Purge Plug | Intermediate Joint | |
| HS-5 | 5 | 8 | — | ○ | ○ | ○ | — | — | — |
| HB-6 | 6.5 | 10 | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| HB-7 | 7 | 10 | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| HB-8 | 8.5 | 12.5 | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| HB-10 | 10 | 14.5 | — | — | — | — | — | — | — |
| Part Number |
|---|
| HB-820 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nominal I.D. d | Outer Dia. D (Ø) | Color | Minimum Bending Radius (mm) | Operating Pressure Range (MPa) | Standard Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 569.43 | 1 Piece(s) | 4 Day(s) or more | 10 | 8 | 12.5 | Red | 55 | 0～1.5 | 20 |
Loading...
Basic Information
| Applicable Fluid / Usage | Air | Cutting Service Usage | No | Properties | Pressure Resistance / Cold Resistance / Oil Resistance / Flexibility |
|---|---|---|---|---|---|
| Hose Material | Polyurethane | Mounting Metal Fittings | No | Operating Temperature Range(°C) | -20::60 |
Please check the type/dimensions/specifications of the part HB-820 in the Hit Hose series.
Specification/Dimensions
-
type
- HB
-
Nominal I.D. d
-
Outer Dia. D(Ø)
-
Color
- Red
- Blue
- Green
-
Minimum Bending Radius(mm)
-
Standard Length(m)
Days to Ship
-
- All
- 4 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 9 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HB-610 |
| HB-620 |
| HB-630 |
| HB-650 |
| HB-830 |
| HB-8B |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nominal I.D. d | Outer Dia. D (Ø) | Color | Minimum Bending Radius (mm) | Operating Pressure Range (MPa) | Standard Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 204.61 | 1 Piece(s) | 4 Day(s) or more | 10 | 6 | 10 | Red | 40 | 0～1.5 | 10 | ||
MYR 390.40 | 1 Piece(s) | 4 Day(s) or more | 10 | 6 | 10 | Red | 40 | 0～1.5 | 20 | ||
MYR 576.18 | 1 Piece(s) | 4 Day(s) or more | 10 | 6 | 10 | Red | 40 | 0～1.5 | 30 | ||
MYR 751.93 | 1 Piece(s) | 6 Day(s) or more | 10 | 6 | 10 | Red | 40 | 0～1.5 | 50 | ||
MYR 844.74 | 1 Piece(s) | 4 Day(s) or more | 10 | 8 | 12.5 | Red | 55 | 0～1.5 | 30 | ||
MYR 2,185.81 | 1 Piece(s) | 11 Day(s) | - | 8 | 12.5 | Blue | 55 | 0～1.5 | 100 |
Additional Products in this Category
- TOYOFUSSO
- Super Flexible Fluorine Hose (Reinforcement Thread Type)
- High Polymer
- Hose for Painting, Sun Paint Hose (FUB-Easy)
- Hose for Painting, FA Tube
- Neo Light Hose for General Delivery and Suction
- Hakko Steam Hose
- 13mm soft gas hose (For city gas, 2 bands)
Customers Who Viewed This Item Also Viewed
-
-
Blade Hose (Made of Polyurethane)CHIYODA
Standard Price : MYR 181.72-
Days to Ship : 4 Day(s) or more
-
-
-
Water Resistant Polyurethane Blade Hose FHCHIYODA
Standard Price : MYR 6,566.75
Days to Ship : 9 Day(s) or more
-
-
-
-
-
Hose for Air Tools Cosmetic Air HosesTOGAWA INDUSTRY
Standard Price : MYR 397.44-
Days to Ship : 5 Day(s) or more
-
Multipurpose/Chemical-Resistant Hose, Super-Flexible Fluorine Tube, Clear BlueHAKKOH
Days to Ship : 8 Day(s) or more
-
Urethane Hose Joint (External Thread Type)HAKKOH
Standard Price : MYR 32.45-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy