(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
For General Piping, Tube Fitting, Elbow (PL10-02W)
A quick connect fitting with outstanding usability.
[Features]
·40% more compact by volume compared to the standard type.
·Easy attachment and detachment of tubes despite ultra compact size.
·Collet used has a circular shape.
·Water can be used depending on the conditions.
·High performance and high quality. Industry-leading range of variations.
・ Allows centralized piping.
[Applications]
·Ideal as fitting for general piping.
(i)Caution
- The external appearance, shape, dimensions, etc., of some tube fitting models have been changed. Please refer to the product information for details.
Japanese Only
Part Number
Configured Part Number is shown.
PL10-02W
Abundant Product Lineup Of One-Touch Fittings For All Kinds Of Piping
Elbow
Examples of use
Connection between screw and tube
Model Numbers, Etc.
Outline drawing 1
Outline drawing 2
Outline drawing 3
| Format | Compatible Fitting Diameter øD | R | A | B | L | øP | Tube End C | E | Hex H | Orifice Diameter (ømm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PL4-M5 | 4 | M5 × 0.8 | 2.8 [3] | 16 | 18.2 [18] | 10 | 14.9 | 17.7 | 8 | 2.4 | 5.7 |
| PL4-M6 | M6 × 1 | 3.8 | 20 | 21.2 | 18.7 | 10 | 2.8 | 8 | |||
| PL4-01 | R1/8 | 8 | 22 | 23 | 2.8 | 10 | |||||
| PL4-02 | R1/4 | 11 | 29 | 28 | 20.7 | 14 | 18 | ||||
| PL6-M5 | 6 | M5 × 0.8 | 2.8 [3] | 19.5 | 23 [22.8] | 12.5 | 17 | 20.3 | 10 | 2.4 | 8.9 |
| PL6-M6 | M6 × 1 | 3.8 | 20.5 | 23 | 3 | 8 | |||||
| PL6-01 | R1/8 | 8 | 22.5 | 24.8 | 4.2 | 11 | |||||
| PL6-02 | R1/4 | 11 | 28 | 28.2 | 21.8 | 14 | 4.3 | 19 | |||
| PL6-03 | R3/8 | 12 | 31.5 | 31.4 | 23.8 | 17 | 30 | ||||
| PL8-01 | 8 | R1/8 | 8 | 24 | 22.3 | 14.5 | 18.1 | 22.7 | 12 | 6 | 14 |
| PL8-02 | R1/4 | 11 | 28 | 29.2 | 23.7 | 14 | 6.7 | 20 | |||
| PL8-03 | R3/8 | 12 | 31 | 31.9 | 24.7 | 17 | 31 | ||||
| PL10-01 | 10 | R1/8 | 8 | 25 | 29.8 | 17.5 | 20.2 | 25.5 | 12 | 6 | 18 |
| PL10-02 | R1/4 | 11 | 28.5 | 31.2 | 26 | 14 | 8 | 23 | |||
| PL10-03 | R3/8 | 12 | 32 | 31.4 | 27 | 17 | 8.3 | 34 | |||
| PL10-04 | R1/2 | 15 | 36 | 36.6 | 27.5 | 21 | 57 | ||||
| PL12-02 | 12 | R1/4 | 11 | 29.8 | 34.2 | 21 | 23.4 | 29 | 14 | 8 | 27 |
| PL12-03 | R3/8 | 12 | 32.5 | 36.7 | 29.7 | 17 | 10 | 38 | |||
| PL12-04 | R1/2 | 15 | 36.5 | 38.8 | 30.7 | 21 | 10.3 | 61 | |||
| PL16-03 | 16 | R3/8 | 11 | 47 | 53.2 | 25 | 24.1 | 33.1 | 22 | 11 | 74 |
| PL16-04 | R1/2 | 15 | 51 | 55.3 | 13 | 79 |
Specifications
| Usable Fluids | Air, water (see conditions*) |
|---|---|
| Maximum Operating Pressure | 1.0 MPa |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 60°C (no freezing) |
- *When the fluid used is water, the following conditions must be observed.
- 1.When using water, make sure the surge pressure stays below the maximum operating pressure.
- 2.Tap water of the standard equivalent to the water supply in Japan can be used. Please inquire if you want to use other kinds of water.
- 3.Be sure to use an insert ring when using water.
Compatible Sizes
| Millimeter Size (mm) | ø4, ø6, ø8, ø10, ø12, ø16 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8 |
| Metric Male Thread | M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Male Thread | R1/8, R1/4, R3/8, R1/2 |
| Metric Female Thread | M5 × 0.8 |
| Taper Pipe Female Thread | Rc1/8, Rc1/4, Rc3/8, Rc1/2 |
| Part Number |
|---|
| PL10-02W |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Application | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 | Package Specifications | Orifice Dia (mm) | Release Ring Color | Resin Body Color | Trusco Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 21.05 | 10 Piece(s) | 9 Day(s) or more | - | Standard/Mini | 10 | R | 1/4 | Regular Packaging Specifications | 8 | Light Gray | Light Gray | - |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Screw Mount Direction | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Body Material | PBT | Thread Material | Brass | Screw Mounting, Direction | Elbow |
| Elbows | Male Elbows | Operating Temperature(°C) | 0::60 |
Please check the type/dimensions/specifications of the part PL10-02W in the For General Piping, Tube Fitting, Elbow series.
Specification/Dimensions
-
Trusco Code
-
type
- PL
-
Application
- Standard/Mini
- Clean circumstance
-
Applicable Tube O.D.1(φ)
-
Connection Screw Type 1
- M
- R
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
- M5×0.8
- M6×1
-
Package Specifications
- Clean Room Packaging Specifications
- Regular Packaging Specifications
-
Orifice Dia(mm)
-
Release Ring Color
- Black
- Light Gray
- Light blue
- White
-
Resin Body Color
- Black
- Light Gray
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| PL1/4-01 |
| PL1/4-01W |
| PL1/4-02 |
| PL10-03 |
| PL10-03W |
| PL10-04 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Application | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 | Package Specifications | Orifice Dia (mm) | Release Ring Color | Resin Body Color | Trusco Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 20.54 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 6.35 | R | 1/8 | Regular Packaging Specifications | 4.6 | White | Black | - | ||
MYR 15.49 | 10 Piece(s) | 10 Day(s) or more | - | Standard/Mini | 6.35 | R | 1/8 | Regular Packaging Specifications | 4.6 | White | Light Gray | - | ||
MYR 23.95 | 1 Piece(s) | 2 Day(s) or more | - | Standard/Mini | 6.35 | R | 1/4 | Regular Packaging Specifications | 5.3 | White | Black | - | ||
MYR 22.48 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 10 | R | 3/8 | Regular Packaging Specifications | 8.3 | Black | Black | 290-9014 | ||
MYR 24.82 | 1 Piece(s) | 2 Day(s) | - | Standard/Mini | 10 | R | 3/8 | Regular Packaging Specifications | 8.3 | Light Gray | Light Gray | - | ||
MYR 27.78 | 1 Piece(s) | 8 Day(s) | 10 | Standard/Mini | 10 | R | 1/2 | Regular Packaging Specifications | 8.3 | Black | Black | 290-9022 |
Additional Products in this Category
- For General Piping, Tube Fitting, Female Bulkhead Straight
- Rotating Element Piping, Rotary Joint, Straight
- Touch Connector FUJI H Type Union
- Chemifit C1S Series - Female Connector EFC-C1S
- Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) 45° Elbow
- Double Branch KQ2UD (Face Seal), One-Touch Fitting
- Metal One-touch Fitting KQB2 Series Elbow Union KQB2L
- Delta Branch KGUD Stainless Steel One-Touch Fitting, KG Series.
Customers Who Viewed This Item Also Viewed
-
Tube Fitting for General Piping - StraightPISCO
Standard Price : MYR 9.95-
Days to Ship : 1 Day(s) or more
-
For General Piping, Mini-Type Tube Fitting, ElbowPISCO
Standard Price : MYR 13.28-
Days to Ship : 1 Day(s) or more
-
-
Standard Type Speed Controller ElbowPISCO
Standard Price : MYR 34.22-
Days to Ship : 1 Day(s) or more
-
Straight Polyurethane Tubes for General PipingPISCO
Standard Price : MYR 67.99-
Days to Ship : 1 Day(s) or more
-
For General Piping, Tube Fitting, Union TeePISCO
Standard Price : MYR 19.77-
Days to Ship : 1 Day(s) or more
-
One-Touch Couplings - Male Connectors - Outlined with HexMISUMI
Standard Price : MYR 3.74-
Days to Ship : 1 Day(s) or more
-
For General Piping, Tube Fitting, Union WyePISCO
Standard Price : MYR 20.96-
Days to Ship : 1 Day(s) or more
-
Thread Conversion Fittings - L Fixed Type / L Configurable TypeMISUMI
Days to Ship : 2 Day(s) or more
-
For General Piping, Tube Fitting, Hex Socket Head StraightPISCO
Standard Price : MYR 11.09-
Days to Ship : 1 Day(s) or more
-
For General Piping, Tube Fitting, Reducer Union StraightPISCO
Standard Price : MYR 16.60-
Days to Ship : 1 Day(s) or more
-
For General Piping, Tube Fitting, Union StraightPISCO
Standard Price : MYR 16.24-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy