(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Male Connector KSH (Standard Type) Rotary One-Touch Fitting
SMC One-Touch fitting, male connector: KSH (standard type).
[Features]
· Low-torque-rotation enabled one-touch fitting for rotating pipes.
· Can be used on rotating and oscillating parts of robots, etc.
· Copper-free (with electroless nickel plating).
· Sealant is standard.
[Applications]
· Use for piping at right angles from the female thread part.
(i)Caution
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Part Number
Configured Part Number is shown.
Male Connector: KSH (Standard Type) Details
Male Connector: KSH (Standard Type) KSH04/KSH06/KSH08/KSH10/KSH12 Series M5, M6 Type product images
Male Connector: KSH (Standard Type) KSH04/KSH06/KSH08/KSH10/KSH12 Series R Type product images
Male Connector: KSH (Standard Type) Specifications
| Usable fluids | Air |
|---|---|
| Operating pressure rangeNote 1) | -100 kPa to 1 MPa |
| Proof pressure | 3 MPa |
| Ambient and fluid temperature | -5 to 60°C (no freezing) |
| Thread | JIS B0203 (taper thread for piping), JIS B0205 (metric coarse thread) |
- * Note 1) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Also, when using in a vacuum, grease may enter the inside due to the nature of its construction.
Rotating Torque / Allowable Number Of Rotations
| Applicable Tubing Outer Diameter | ø4 | ø6 | ø8 | ø10 | ø12 | |
|---|---|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 | 0.022 | |
| Allowable number of rotations (s)-1Note 3) | KS Series | 8.4 | 8.4 | 6.7 | 5 | 4.2 |
- * Note 2) Rotating torque under pressure 0.5 MPa.
- * Note 3) Number of rotations per second.
Principle Part Materials
| Principle parts | KS Series |
|---|---|
| Body | PBT |
| Stud, Holder, Guide | C3604 (with electroless nickel plating), SUS304 |
| Chuck, retainer | SUS304 (Retainer [C] of KX series only: C3604 [with electroless nickel plating]) |
| Collet / Release button / Retaining ring | Polyacetal |
| O-ring/Seal | NBR |
| Rotary seal | NBR |
| Slide bearing | Oil-containing polyacetal |
| Ball bearings | Bearing steel |
| Gasket | SUS304/NBR |
Male Connector: KSH (Standard Type) Dimensions
For M5, M6
(Unit: mm)
KSH04/KSH06/KSH08/KSH10/KSH12 Series M5, M6 type dimensional drawing
For R
(Unit: mm)
KSH04/KSH06/KSH08/KSH10/KSH12 Series R type dimensional drawing
| Applicable tubing outer diameter (mm) | Connection thread R M | Model | H (width across flats) | D1 | D2 | L | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | |||||||||||
| 4 | M5 × 0.8 | KSH04-M5 | 8 | 10.4 | 12 | 36.5 | 33 | 16 | 2.5 | 4.0 | 4.0 | 9 |
| M6 × 1 | KSH04-M6 | 37 | ||||||||||
| 1/8 | KSH04-01S | 12 | 37.1 | 34 | 14 | |||||||
| 6 | M5 × 0.8 | KSH06-M5 | 8 | 12.8 | 14 | 37.5 | 33.5 | 17 | 2.5 | 4.0 | 4.0 | 12 |
| M6 × 1 | KSH06-M6 | 38 | 34 | 3 | 5.6 | 5.6 | ||||||
| 1/8 | KSH06-01S | 14 | 38.6 | 35.5 | 4 | 10.4 | 10.4 | 17 | ||||
| 1/4 | KSH06-02S | 42 | 36.5 | 23 | ||||||||
| 8 | 1/8 | KSH08-01S | 17 | 15.2 | 17 | 43.1 | 40 | 18.5 | 6 | 26.1 | 18.0 | 23 |
| 1/4 | KSH08-02S | 46.5 | 41 | 29 | ||||||||
| 3/8 | KSH08-03S | 46.9 | 41.5 | 37 | ||||||||
| 10 | 1/4 | KSH10-02S | 22 | 18.5 | 22 | 53.5 | 48 | 21 | 7 | 36.3 | 29.5 | 55 |
| 3/8 | KSH10-03S | 53.9 | 48.5 | 63 | ||||||||
| 1/2 | KSH10-04S | 56.6 | 49.5 | 81 | ||||||||
| 12 | 3/8 | KSH12-03S | 24 | 20.9 | 24 | 55.9 | 50.5 | 22 | 8 | 46.1 | 46.1 | 75 |
| 1/2 | KSH12-04S | 59.1 | 52 | 92 | ||||||||
- * Reference dimensions of R thread after installation
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Fluid | Applicable Tube O.D.1 (φ) | Types of connection | Connection screw |
|---|---|---|---|---|---|---|---|---|
MYR 76.78 | 2 Piece(s) | 21 Day(s) | - | 5/32 | UNF | 10-32 | ||
MYR 76.78 | 2 Piece(s) | 21 Day(s) | - | 5/32 | NPT | 1/8 | ||
MYR 75.05 | 1 Piece(s) | 21 Day(s) | - | 4 | R | 1/8 | ||
MYR 75.05 | 1 Piece(s) | 32 Day(s) | Water / Air | 4 | M | 5×0.8 | ||
MYR 75.05 | 1 Piece(s) | 21 Day(s) | - | 4 | M | 6×1.0 | ||
MYR 78.58 | 1 Piece(s) | 32 Day(s) | Water / Air | 6 | R | 1/8 | ||
MYR 78.58 | 1 Piece(s) | 21 Day(s) | - | 6 | R | 1/4 | ||
MYR 78.58 | 1 Piece(s) | 2 Day(s) | Water / Air | 6 | M | 5×0.8 | ||
MYR 78.58 | 1 Piece(s) | 21 Day(s) | Water / Air | 6 | M | 6×1.0 | ||
MYR 80.78 | 2 Piece(s) | 21 Day(s) | - | 1/4 | NPT | 1/8 | ||
MYR 80.78 | 2 Piece(s) | 21 Day(s) | - | 1/4 | NPT | 1/4 | ||
MYR 95.35 | 1 Piece(s) | 32 Day(s) | - | 8 | R | 1/8 | ||
MYR 95.35 | 1 Piece(s) | 32 Day(s) | Water / Air | 8 | R | 1/4 | ||
MYR 95.35 | 1 Piece(s) | 21 Day(s) | - | 8 | R | 3/8 | ||
- | 2 Piece(s) | Quote | - | 5/16 | NPT | 1/8 | ||
MYR 98.00 | 2 Piece(s) | 21 Day(s) | - | 5/16 | NPT | 1/4 | ||
MYR 120.97 | 1 Piece(s) | 21 Day(s) | - | 10 | R | 1/4 | ||
MYR 120.97 | 1 Piece(s) | 21 Day(s) | - | 10 | R | 3/8 | ||
MYR 127.57 | 2 Piece(s) | 21 Day(s) | - | 10 | R | 1/2 | ||
MYR 124.05 | 2 Piece(s) | 21 Day(s) | - | 3/8 | NPT | 1/4 | ||
MYR 124.05 | 2 Piece(s) | 21 Day(s) | - | 3/8 | NPT | 3/8 | ||
MYR 158.47 | 1 Piece(s) | 21 Day(s) | Water / Air | 12 | R | 3/8 | ||
MYR 158.47 | 1 Piece(s) | 21 Day(s) | Water / Air | 12 | R | 1/2 |
Loading...
Basic Information
| Types | Single-Action / Screw | Fitting Type | For Oscillating Parts、 Rotary Parts | Body Material | Brass |
|---|---|---|---|---|---|
| Application | Standard/Mini | Thread Material | Brass | Packing, Material of O-Ring | NBR |
| For Swivel Parts, Rotary Equipment Parts | Rotary Single-Action Pipe Fitting Half Union | Number of Connection Tubes(piece) | 1 |
Specification/Dimensions
-
Applicable Fluid
- Water
- Air
-
Applicable Tube O.D.1(φ)
-
Types of connection
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
- 6×1.0
- 10-32
-
type
- KSH
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 21 Day(s) or Less
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Quick Fitting, Mini-Type UR Series, Reducer
- Supply Joint, SKR Series, Bulkhead Reducer
- Tube Fitting Branch Double Branch Triple Double for General Piping
- Tube Fitting Union A for General Piping
- Tube Fitting Spatter-Resistant Tee
- Touch Connector, FUJI Male Connector
- Single-Touch Fitting - Male Elbow CNL
- Quick-Connect Fitting Stainless Steel KQ2-G Series Double-Ended Tee Union KQ2T (No Sealant)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy