(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Heavy-Duty Stopper Cylinder RSH Series
Air cylinder with built-in shock absorber to stop pallets gently.
[Features]
· Amount of energy absorption can be adjusted to suit the load.
· Easy replacement of shock absorbers.
· The roller lever direction can be changed in 90° steps.
· Side piping (flange) is possible.
· Bore size 20 mm: Standard stroke 15 mm.
· Bore size 32 mm: Standard stroke 20 mm.
*See the manufacturer's catalog for detailed specifications.
*Product pictures are representations. CAD data is not supported for some model numbers.
(i)Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers
- Product pictures are representations.
Part Number
Configured Part Number is shown.
Heavy Duty Stopper Cylinder RSH Series Specifications
Heavy Duty Stopper Cylinder RSH Series external appearance
| Model | RSH | |
|---|---|---|
| Tube Internal Diameter (mm) | 20 | 32 |
| Operating method | Double acting, Double acting spring type, Single acting (spring extend) | |
| Rod-end configuration | Lever with built-in shock absorber | |
| Applicable fluids | Air | |
| Proof pressure | 1.5 MPa | |
| Maximum operating pressure | 1.0 MPa | |
| Ambient temperature and working fluid temperature | -10°C to 60°C (no freezing) | |
| Lubrication | Not required (non-lube) | |
| Cushioning | Rubber cushion | |
| Stroke length tolerance | +1.4 0 | |
| Mounting | Flange | |
| Port size Rc, NPT, G | M5 × 0.8 | 1/8 |
| - | 1/8 | |
| - | 1/8 | |
Weight list
(Increment: kg)
| Operating method | Rod-end configuration | Tube Internal Diameter (mm) | Weight |
|---|---|---|---|
| Double acting / Double acting spring type / Single acting spring extend | Lever with built-in shock absorber | 20 | 0.41 |
| 32 | 0.75 |
ø20 (20‑mm Diameter) / ø32 (32‑mm Diameter) Structural Drawing
Double acting type (DL, DM) structural drawing
Double acting spring type (BL, BM) structural drawing
Single acting type (TL, TM)
With lock mechanism (-D) structural drawing (option)
When using cancel cap (-C) structural drawing (option)
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Rod Cover | Aluminum Alloy | Metallic painted |
| 2 | Bottom plate | Aluminum Alloy | Chromate |
| 3 | Cylinder tube | Aluminum Alloy | Hard Anodize |
| 4 | Piston | Aluminum Alloy | Chromate |
| 5 | Piston rod | ø20 (20‑mm diameter): Stainless steel ø32 (32‑mm diameter): Carbon steel | Hard chrome plated |
| 6 | Bushing | Resin/Copper alloy (Multiple layers) | - |
| 7 | Guide rod | Carbon steel | Hard chrome plated |
| 8 | Stopper | Stainless steel | - |
| 9 | Lever | Carbon steel | Nickel plating |
| 10 | Lever holder | Carbon steel | Nickel plating |
| 11 | Bumper A | Urethane | - |
| 12 | Bumper B | Urethane | - |
| 13 | Roller | Resin | -□□L |
| Carbon steel | -□□M | ||
| 14 | Spring pin | Carbon tool steel | - |
| 15 | Lever pin | Carbon steel | - |
| 16 | Ring A | Rolled steel | Nickel plating |
| 17 | Adjustment dial | Aluminum Alloy | - |
| 18 | End rod | Special steel | - |
| 19 | Lever spring | Steel wire | - |
| 20 | Magnet | - | - |
| 21 | Flat washer | Steel wire | Nickel plating |
| 22 | C-shaped retaining ring for Shaft | Carbon tool steel | - |
| 23 | Type E retaining ring for shaft | Carbon tool steel | - |
| 24 | Return spring | Steel wire | -T□/-B□ |
| 25 | Hex Socket Set Screw | Chrome Molybdenum Steel | - |
| 26 | Parallel pin | Carbon steel | ø20 (20‑mm diameter) only |
| 27 | Hexagon socket head plug | Chrome Molybdenum Steel | Nickel plating |
| 28 | Spring pin | Carbon tool steel | ø20 (20‑mm diameter) only |
| 29 | Wear ring | Resin | - |
| 30 | Element | Bronze | -T□ only (ø20 [20‑mm diameter] is socket set screw) |
| 31 | Retaining Ring | Carbon tool steel | ø32 (32‑mm diameter) -T□ only |
| 32 | Shock absorber | - | - |
| 33 | Piston Gasket | NBR | - |
| 34 | Rod Gasket | NBR | - |
| 35 | Scraper | NBR | - |
| 36 | Tube gasket | NBR | - |
| 37 | O-ring | NBR | - |
| 38 | Bottom plate gasket | NBR | - |
| 39 | C shape retaining ring for hole | Carbon tool steel | Phosphate coated |
| 40 | Type CE retaining ring for shaft | Carbon tool steel | Phosphate coated |
| 41 | Hexagon socket head bolt | Chrome Molybdenum Steel | Zinc chromate |
| 42 | Hexagon socket head bolt | Stainless steel | ø20 (20‑mm diameter) only |
| 43 | Hexagon socket head bolt | Stainless steel | ø32 (32‑mm diameter) only |
| 44 | Steel ball | Carbon steel | - |
| 45 | Bracket | Carbon steel | Chromate |
| 46 | Bracket spring | Stainless steel wire | - |
| 47 | Pin E | Stainless steel | - |
| 48 | Cancel cap | Aluminum Alloy | Clear anodized |
| 49 | O-ring | NBR | - |
Replacement Parts / Seal Kit
| Bore size (mm) | Kit No. | Content | ||
|---|---|---|---|---|
| Double acting type | Double acting spring type | Single acting | ||
| 20 | RSH20D-PS | RSH20T-PS | Set of items (33) to (37) in above table (excluding [34]) | |
| 32 | RSH32D-PS | RSH32T-PS | ||
- *Seal kit includes (33) to (37) (excluding [34]). Order the seal kit based on each bore size.
- *The seal kit does not include a grease pack, so please order a grease pack separately.
Grease pack part number: GR-S-010 (10 g)
Replacement Parts / Shock Absorber
| Bore size (mm) | Kit No. |
|---|---|
| 20 | RSH-R20 |
| 32 | RSH-R32 |
Outline dimensional drawing
(Unit: mm)
ø20 (20‑mm diameter) dimensional outline drawing
Note 1) The figure shows dimensions at the maximum energy absorption capacity.
Note 2) The dimensional outline drawing for the model with auto switch is identical to the above.
Note 3) The figure shows an extended piston rod.
Note 4) The dimensions marked with * vary according to adjustment of the shock absorber dial.
Note 5) Circumscribed circle ø47 (47‑mm diameter) means the diameter of the circle circumscribed to the cylinder tube angles. The mounting hole diameter must be ø48 (48‑mm diameter). Be careful of the interference between the lever and the mounting base when mounted from the lever side. Thus, the thickness of the mounting base must be 8 mm or less.
Note 6) It is recommended to set the conveyor height in a range from the lower limit position to the upper limit position of the conveyor (dimension *3 shown in the figure).
Note 7) The dimensions in the figure do not include the stroke length tolerance (0 to +1.4 mm). When fixing the cylinder (setting the conveyor position), take this into consideration and be sure to set the cylinder within the range of Note 6, using the upper limit position of the conveyor (roller center position) as a reference.
ø32 (32‑mm diameter) dimensional outline drawing
P (piping port)
- Nil: Rc 1/8
- TN: NPT 1/8
- TF: G 1/8
Note 1) The figure shows dimensions at the maximum energy absorption capacity.
Note 2) The dimensional outline drawing for the model with auto switch is identical to the above.
Note 3) The figure shows an extended piston rod.
Note 4) The dimensions marked with * vary according to adjustment of the shock absorber dial.
Note 5) Circumscribed circle ø62 (62‑mm diameter) means the diameter of the circle circumscribed to the cylinder tube angles. The mounting hole diameter must be ø63 (63‑mm diameter). Be careful of the interference between the lever and the mounting base when mounted from the lever side. Thus, the thickness of the mounting base must be 9 mm or less.
Note 6) It is recommended to set the conveyor height in a range from the lower limit position to the upper limit position of the conveyor (dimension *3 shown in the figure).
Note 7) The dimensions in the figure do not include the stroke length tolerance (0 to +1.4 mm). When fixing the cylinder (setting the conveyor position), take this into consideration and be sure to set the cylinder within the range of Note 6, using the upper limit position of the conveyor (roller center position) as a reference.
Operation Precautions
- 1. In case of cylinders with locking mechanism, do not apply an external force from the opposite side when the lever is locked. Lower the cylinder before adjusting the conveyor or moving the pallet.
- 2. In case of cylinders with locking mechanism, do not collide the pallet and roller when the lever is locked. If the pallet collides with the roller in the locked state, it may cause lever malfunction. (The lever is released when the cylinder is fully retracted.)
- 3. Do not let your hand become caught when operating the cylinder. The lever holder goes up and down while the cylinder is in operation. Pay sufficient attention not to let your hand or fingers become caught between the rod cover and lever holder.
- 4. Do not let water, cutting oil or dust splash on the equipment. It can cause oil leakage and malfunction of the shock absorber.
- 5. The stop state of the workpiece may vary depending on changes in ambient temperature or secular changes in shock absorber resistive force. Check the stop state periodically and adjust the shock absorber resistive force at appropriate intervals.
*See the manufacturer's catalog for product information other than the above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder Operation Method | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Port thread type | Body Options | Auto Switches | Lead Wire | The number of the switches | Roller material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,909.65 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Without (built-in magnet) | - | - | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With cancel cap | Without (built-in magnet) | - | - | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With cancel cap | Z73 | 3 | 2 pcs. | Resin | ||
MYR 1,974.10 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Without (built-in magnet) | - | - | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9B | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BA | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9B | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9B | 1 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9B | 0.5 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BV | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BW | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BW | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BW | 0.5 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BWV | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9BWV | 1 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9N | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9N | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9NV | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9NW | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9N | 5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | M9P | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y7BA | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y59B | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y59B | 0.5 | 12 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y59B | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y59B | 5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y69B | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y69B | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Y69B | 5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Z73 | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Z73 | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Z73 | 3 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Z73 | 0.5 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism | Z80 | 3 | 2 pcs. | Resin | ||
MYR 2,015.15 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism, with cancel cap | Without (built-in magnet) | - | - | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism, with cancel cap | M9B | 3 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism, with cancel cap, with lever detection switch | Without (built-in magnet) | - | - | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism, with cancel cap, with lever detection switch | Z73 | 0.5 | 2 pcs. | Resin | ||
MYR 2,694.53 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | With lock mechanism, with lever detection switch | Without (built-in magnet) | - | - | Resin | ||
MYR 2,296.35 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9B | 0.5 | 2 pcs. | Resin | ||
MYR 2,343.13 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9B | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9BV | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9BW | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9BW | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9BWV | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | M9N | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lever detection switch | Y69A | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | With lever detection switch | Z73 | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y7BA | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y7BW | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y7BW | M12-4 pin A cord (normal key) plug connector / 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y59A | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y59B | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y59B | 3 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Y69A | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Z73 | 0.5 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Z73 | 3 | 2 pcs. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Z73 | 3 | 1 pc. | Resin | ||
- | 1 Piece(s) | Quote | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Z73 | 0.5 | 1 pc. | Resin | ||
MYR 1,909.65 | 1 Piece(s) | 21 Day(s) | [Double Acting] With Return Spring | 20 | 15 | M | Without option | Without (built-in magnet) | - | - | Carbon steel |
Loading...
Basic Information
| Rod Operation Method | Single Rods | Main Body Shape | Plate Cylinder | Additional Function | Standard |
|---|---|---|---|---|---|
| Environment, Applications | Standard | Cushion | Rubber cushion | Operating Pressure(MPa) | 1.0 |
| Rod Tip Shape | Lever with built-in shock absorber | Tube Material | Aluminum alloy / hard anodized aluminum | Specification of cylinder | Heavy duty stopper cylinder |
| Mount Type | Flange |
Specification/Dimensions
-
Cylinder Operation Method
- Double Acting
- Single-Action (Retraction)
- Double Acting
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Port thread type
- G
- M
- NPT
- Rc
-
Body Options
-
Auto Switches
-
Lead Wire
- 0.5
- 1
- 3
- 5
- M8-4 pin plug connector / 0.5
- M8-3 pin plug connector / 0.5
- M12-4 pin A cord (normal key) plug connector / 0.5
- M12-4 pin A cord (normal key) plug connector / 1
-
The number of the switches
-
Roller material
- Carbon steel
- Resin
-
type
- RSH
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Space Saving Type Cartridge Cylinder Series CAT
- Push-in joint ultra small size cylinder MKY series
- Stroke Reading Cylinder CE1 Series
- Free Mount Cylinder For Vacuum ZCUK Series
- Lateral Load Resisting Low-Friction Cylinder MQM Series
- Mini Free Mount Cylinder CUJ Series, ø4, ø6, ø8, ø10
- Free Mount Cylinder, Single Acting, Single Rod, Spring Return/Extend CU Series
- Free Mount Cylinder, Long Stroke Type, Non-Rotating Rod, Double Acting: Single Rod CUK Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy