(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Compact Low-Friction Cylinder MQQ Series (MQQLB20-30DM)
A compact low-friction cylinder suitable for low pressures, low speeds, uniform speeds and low friction actuation.
[Features]
· Covers a range of actuation speeds and output controls thanks to its metal seal structure with minimal sliding resistance.
· Its minimal sliding resistance allows for low-pressure actuation at 0.005 MPa.
· Smooth and uniform-speed actuation ranges as low as 0.3 mm/s.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance: Features built-in ball bushings in the bearings for improved lateral load resistance. (MQQL)
· Its low sliding resistance allows output control in approximately 0.05‑N increments. (Based on cylinder piston area × pressure accuracy)
· No change to sliding resistance, even after extended periods of non-use.
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
MQQLB20-30DM
Compact Low-Friction Cylinder MQQ Series Specifications
Compact Low-Friction Cylinder MQQ Series external appearance
Symbol: Double acting, single rod
Specifications
Standard Type: MQQT
| Tube Inner Diameter (mm) | 10 | 16 | 20 | 25 | 30 | 40 | |
|---|---|---|---|---|---|---|---|
| Seal Construction | Metal seal | ||||||
| Action | Double acting, single rod | ||||||
| Fluid | Air | ||||||
| Proof Pressure | 1.05 MPa | ||||||
| Maximum operating pressure | 0.5 MPa | ||||||
| Minimum operating pressure | 0.005 MPa | ||||||
| Ambient and Fluid Temperature | -10 to 80°C | ||||||
| Cushioning | Rubber bumper (equipped as standard) | ||||||
| Lubrication | Not required (non-lubricated) | ||||||
| Rod-end thread | Female thread | ||||||
| Stroke Length Tolerance | +1.0 0 | ||||||
| Piston Speed | 0.3 to 300 mm/s | ||||||
| Total Leakage Rate | Supply Pressure 0.1 MPa | 150 cm3/min | 200 cm3/min | 300 cm3/min | 400 cm3/min | ||
| Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | 1,600 cm3/min | |||
| Supply pressure 0.5 MPa | 1,500 cm3/min | 2,000 cm3/min | 3,000 cm3/min | 4,000 cm3/min | |||
Lateral-Load-Resistant Type: MQQL
| Tube Inner Diameter (mm) | 10 | 16 | 20 | 25 | 30 | 40 | |
|---|---|---|---|---|---|---|---|
| Seal Construction | Metal seal | ||||||
| Action | Double acting, single rod | ||||||
| Fluid | Air | ||||||
| Proof Pressure | 1.05 MPa | ||||||
| Maximum operating pressure | 0.7 MPa | ||||||
| Minimum Operating Pressure*1 | 0.005 MPa | ||||||
| Ambient and Fluid Temperature | -10 to 80°C | ||||||
| Cushioning | Rubber bumper (Standard) | ||||||
| Lubrication*2 | Not required (non-lubricated) | ||||||
| Rod-end thread | Female thread | ||||||
| Stroke Length Tolerance | +1.0 0 | ||||||
| Operating Piston Speed*3 | 0.5 to 300 mm/s | ||||||
| Total Leakage Rate*4 | Supply Pressure 0.1 MPa | 150 cm3/min | 200 cm3/min | 300 cm3/min | 400 cm3/min | ||
| Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | 1,600 cm3/min | |||
| Supply pressure 0.5 MPa | 1,500 cm3/min | 2,000 cm3/min | 3,000 cm3/min | 4,000 cm3/min | |||
*1: Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the weight of its moving parts and the pressure will likely increase by approximately 0.003 to 0.005 MPa due to an offset load from the weight of the rod.
*2: See p. 339 in the SMC catalog regarding information on lubrication. This product uses turbine oil as an initial lubricant. Lubricant may seep out of the rod or the piping port.
*3: Control low speed actuation with differential pressure, speed controllers, etc. (Refer to the recommended circuit example on p. 319 of the SMC catalog for details.)
*4: The values are only for reference and are not guaranteed.
Diagram
Standard type / MQQT diagram
Lateral-load-resistant type / MQQL (built-in ball bushing type) diagram
Component Parts
| Number | Part Name | Material | Notes |
|---|---|---|---|
| 1 | Rod | Carbon steel | Hard chrome plated |
| 2 | Piston | Special stainless steel | - |
| 3 | Liner | Special stainless steel | - |
| 4 | Sleeve | Special stainless steel | - |
| 5 | Sleeve Retainer | Aluminum alloy | - |
| 6 | Plate | Aluminum alloy | Hard anodized aluminum |
| 7 | Guide | Fluororesin | - |
| 8 | Cylinder Tubing | Aluminum alloy | Hard anodized aluminum |
| 9 | Bumper A | Polyurethane | - |
| 10 | Bumper B | Polyurethane | - |
| 11 | Bushing | Aluminum alloy | - |
| 12 | Bottom Plate | Aluminum alloy | Hard anodized aluminum |
| 13 | O-ring | NBR | - |
| 14 | Retaining Ring | Carbon tool steel | Phosphate conversion coating |
| 15 | Bolt | Carbon tool steel | Chromate |
| 16 | Ball Bushing | - | - |
Mounting method
a) Mounting type A (when using the mounting plate threads)
*Always use a flat washer for mounting type A.
b) Mounting type B (when using the cylinder tube threads)
Applicable Mounting Bolt Dimensions Table
| Model | Mounting Type A | Mounting Type B | ||||
|---|---|---|---|---|---|---|
| Mounting Bolt Size | C (mm) | D: Thread Length (mm) | Mounting Bolt Size | E (mm) | ||
| Standard Type MQQT | MQQTB10-□D | M3 × 0.5 | 7 | 35 + stroke | M4 × 0.7 | 8 to 11 |
| MQQTB16-□D | M5 × 0.8 | 7 | 35 + stroke | M6 × 1 | 13 to 17 | |
| MQQTB20-□D | 8.5 | 40 + stroke | ||||
| MQQTB25-□D | 9 | 45 + stroke | ||||
| MQQTB30-□D | 7.5 | 50 + stroke | ||||
| MQQTB40-□D | M6 × 1 | 6 | 50 + stroke | M8 × 1.25 | 16 to 22 | |
| Lateral-Load-Resistant Type MQQL (Built-In Ball Bushing Type) | MQQLB10-□D | M3 × 0.5 | 7 | 65 + stroke | M4 × 0.7 | 8 to 11 |
| MQQLB16-□D | M5 × 0.8 | 5.5 | 70 + stroke | M6 × 1 | 13 to 17 | |
| MQQLB20-□D | 8 | 80 + stroke | ||||
| MQQLB25-□D | 6.5 | 85 + stroke | ||||
| MQQLB30-□D | 7 | 105 + stroke | ||||
| MQQLB40-□D | M6 × 1 | 7 | 105 + stroke | M8 × 1.25 | 16 to 22 | |
□: stroke
*See the SMC catalog for details of other specifications, structures, dimensional drawings, etc.
| Part Number |
|---|
| MQQLB20-30DM |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Support bracket | Port thread type | Rod Tip Shape | Type | Sealing materials |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,376.83 | 1 Piece(s) | 21 Day(s) | 20 | 30 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Male thread | Lateral load resisting type (Built-in ball bushing) | Metal seal |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Plate Cylinder |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard / Low Friction (Internal Resistance) / Low Speed | Cushion | Rubber bumper (Standard) |
| Tube Material | Aluminum alloy / hard anodized aluminum | Specification of cylinder | Compact low friction cylinder |
Please check the type/dimensions/specifications of the part MQQLB20-30DM in the Compact Low-Friction Cylinder MQQ Series series.
Specification/Dimensions
-
type
- MQQL
- MQQT
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Operating Pressure(MPa)
-
Support bracket
-
Port thread type
- G
- M Screw
- NPT
- Rc
-
Rod Tip Shape
- Female thread (standard)
- Male thread
-
Type
- Lateral load resisting type (Built-in ball bushing)
- Standard type
-
Sealing materials
- Metal seal
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| MQQLB10-15DM |
| MQQLB10-20D |
| MQQLB10-20DM |
| MQQLB20-40D |
| MQQLB20-40DM |
| MQQLB20-50D |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Support bracket | Port thread type | Rod Tip Shape | Type | Sealing materials |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 10 | 15 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Male thread | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,049.73 | 1 Piece(s) | 21 Day(s) | 10 | 20 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Female thread (standard) | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,152.58 | 1 Piece(s) | 21 Day(s) | 10 | 20 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Male thread | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,322.53 | 1 Piece(s) | 21 Day(s) | 20 | 40 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Female thread (standard) | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,425.38 | 1 Piece(s) | 21 Day(s) | 20 | 40 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Male thread | Lateral load resisting type (Built-in ball bushing) | Metal seal | ||
MYR 1,371.10 | 1 Piece(s) | 21 Day(s) | 20 | 50 | 0.005 to 0.7 | Through-hole / both sides tapped common (standard) | M Screw | Female thread (standard) | Lateral load resisting type (Built-in ball bushing) | Metal seal |
Additional Products in this Category
- Barb coupler type ultra-compact cylinder TKY series
- Stroke Reading Cylinder CE1 Series
- Lateral Load Resisting Low-Friction Cylinder MQM Series
- Mini Free Mount Cylinder CUJ Series, ø4, ø6, ø8, ø10
- Mini Free Mount Cylinder CUJ Series, ø12, ø16, ø20
- Free Mount Cylinder, Single Acting, Single Rod, Spring Return/Extend CU Series
- Free Mount Cylinder, Non-Rotating Rod Type, Double Acting: Single Rod CUK Series
- Free Mount Cylinder, Long Stroke Type, Double Acting: Single Rod CU Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy