(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (MYT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Fine Lock Cylinder, Double Acting, Single Rod CLJ2 Series (Part Numbers)
A standard cylinder that can be locked in both directions.
[Features]
· An air cylinder with lock. Suitable for intermediate stops, emergency stops and drop prevention.
· Compact lock mechanism built-in.
· Can be used from 50 to 500 mm/s if within the allowable kinetic energy range.
*See the SMC catalog for specification details.
*Product pictures are representative images. CAD data is not supported for some model numbers.
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
Fine Lock Cylinder, Double Acting, Single Rod CLJ2 Series Specifications
Fine Lock Cylinder, Double Acting, Single Rod CLJ2 Series external appearance
Head cover port location (axial direction)
Head cover port location (90° direction)
Specifications
| Tube Inner Diameter (mm) | 16 |
|---|---|
| Action | Double acting, single rod type |
| Lubrication | Not required (non-lubricated) |
| Locking Method | Spring lock (exhaust locking) Pneumatic (pressurized locking) Spring/pneumatic combination lock |
| Fluid | Air |
| Proof Pressure | 1.05 MPa |
| Maximum operating pressure | 0.7 MPa |
| Minimum operating pressure | 0.08 MPa |
| Ambient and Fluid Temperature | Without auto switch: -10°C to 70°C (no freezing) With auto switch: -10°C to 60°C (no freezing) |
| Piston Speed | *50 to 500 mm/s |
| Cushioning | Rubber cushion |
| Stroke Length Tolerance | +1.0 0 |
| Mount Support Type | Basic type, axial foot type, rod-end flange type, double clevis type |
*There are restrictions related to allowable kinetic energy on the speeds at which the piston can be locked. A maximum speed of 750 mm/s is supported if it is to be locked in a stationary state for drop prevention, etc.
Fine Lock Specifications
| Locking Method | Spring Lock (Exhaust Locking) | Spring/Pneumatic Combination Lock | Pneumatic Lock (Pressurized Locking) |
|---|---|---|---|
| Fluid | Air | ||
| Maximum Operating Pressure | 0.5 MPa | ||
| Unlocking Pressure | 0.3 MPa or more | 0.1 MPa or more | |
| Locking Starting Pressure | 0.25 MPa or less | 0.05 MPa or more | |
| Locking Direction | Bidirectional | ||
Weight Table
(Unit: g)
| Tube Inner Diameter (mm) | 16 | |
|---|---|---|
| *Basic Weight | 320 | |
| Additional weight per 15 strokes | 6.5 | |
| Mounting Bracket Weight | Axial foot type | 27 |
| Rod-end flange type | 21 | |
| **Double Clevis Type (With Pin) | 10 | |
- *The mounting nut and rod-end nut are included in the basic weight.
- *The mounting nut is not included in the weight for the double clevis.
Calculation method: (Example) CLJ2L16-60
- Basic weight: 320 (ø16 mm)
- Additional weight: 6.5 g / 15 stroke
- Cylinder stroke: 60 stroke
320 + 6.5 / 15 × 60 + 27 = 373 g
Stopping Accuracy (*Not Including Variation in Control.)
(Units: mm)
| Locking Method | Operating Piston Speed (mm/s) | |||
|---|---|---|---|---|
| 50 | 100 | 300 | 500 | |
| Spring lock (exhaust locking) | ±0.4 | ±0.5 | ±1.0 | ±2.0 |
| Pneumatic Lock (Pressurized Locking) Spring/pneumatic combination lock | ±0.2 | ±0.3 | ±0.5 | ±1.5 |
Conditions/load: 2 kg, Solenoid valve: lock port mounting
Drawing (*Cannot be Disassembled.)
Spring lock (exhaust locking) / Spring/pneumatic combination lock diagram
Pneumatic lock (pressurized locking) diagram
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Aluminum alloy | Clear anodizing |
| 2 | Head cover | Aluminum alloy | Clear anodizing |
| 3 | Cover A | Carbon steel | Nitrided, nickel chrome plating |
| 4 | Cover B | Aluminum alloy | Hard anodized aluminum |
| 5 | Cover C | Aluminum alloy | Hard anodized aluminum |
| 6 | Intermediate Cover | Aluminum alloy | Hard anodized aluminum |
| 7 | Cylinder Tubing | Stainless steel | - |
| 8 | Piston rod | Stainless steel | Hard chrome plated |
| 9 | Piston | Aluminum alloy | Chromate |
| 10 | Brake Piston | Carbon steel | Nitrided |
| 11 | Brake Arm | Carbon steel | Nitrided |
| 12 | Brake Shoe | Special friction material | - |
| 13 | Roller | Carbon steel | Nitrided |
| 14 | Pin | Carbon steel | Heat treated |
| 15 | Retaining Ring | Carbon tool steel | - |
| 16 | Brake Spring | Steel wire | Zinc chromate |
| 17 | Bushing A | Bearing alloy | - |
| 18 | Bushing B | Bearing alloy | - |
| 19 | Manual Lock Release Cam | Chrome molybdenum steel | Nitrided |
| 20 | Cam Guide | Carbon steel | Nitrided, platinum silver coated |
| 21 | Lock Nut | Rolled steel | - |
| 22 | Flat Washer | Rolled steel | - |
| 23 | Retaining Ring | Carbon tool steel | - |
| 24 | Hex Socket Head Cap Screw | Chrome molybdenum steel | - |
| 25 | Spring Washer | Steel wire | - |
| 26 | Hex Socket Head Cap Screw | Chrome molybdenum steel | - |
| 27 | Spring Washer | Steel wire | - |
| 28 | Hex Socket Head Cap Screw | Chrome molybdenum steel | - |
| 29 | Spring Washer | Steel wire | - |
| 30 | Silencer | Bronze | Use with E type only |
| 31 | Damper | Urethane | - |
| 32 | Wear Ring | Resin | - |
| 33 | Mounting nut | Brass | - |
| 34 | Rod End Nut | Rolled steel | - |
| 35 | Piston Seal | NBR | - |
| 36 | Rod Seal A | NBR | - |
| 37 | Rod Seal B | NBR | - |
| 38 | Brake Piston Seal | NBR | - |
| 39 | Cylinder Tube Gasket | NBR | - |
| 40 | Intermediate Cover Gasket | NBR | - |
| 41 | Cam Gasket | NBR | - |
| 42 | Piston Gasket | NBR | - |
Dimensional drawing
(Units: mm)
Basic type (B) CLJ2B16-□□- E/D/P dimensional drawing
Axial foot type (L) CLJ2L16-□□- E/D/P dimensional drawing
Rod-end flange type (F) CLJ2F16-□□- E/D/P dimensional drawing
Double clevis type (D) CLJ2D16-□□- E/D/P dimensional drawing
*2: A clevis pin and retaining ring are shipped together with double clevis type (D).
Caution when Locking
- Holding force (maximum static load) means the maximum capability of holding a static load that is not accompanied by vibration or impact after being locked and in a state with no load. It does not refer to a load that can be held constantly. Carefully check the following points when using (selecting) this product.
- If it rod slips because the lock's holding force has been exceeded, the brake shoe could be damaged, resulting in reduced holding force and/or a shortened lifespan.
- The upper limit of the load used under conditions not associated with kinetic energy when locking (such as for drop prevention) must be 35% or less of the holding force.
- Do not use in a locked state to sustain a load that involves impact.
*See the SMC catalog for information other than that detailed above.
| Part Number |
|---|
| CLJ2L16-200-P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Stroke (mm) | Specifications | Auto Switches | Lead Wire | The number of the switches | Head Cover Port Position | Type of Mount Support | Lock actuation system |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 200 | Without magnet | - | - | - | 90° to axis | Axial foot type | Pneumatic Lock (Pressurized Locking) |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Cylinder (Tube) Inner Diameter(Ø) | 16 | Additional Function | With fall prevention function / With Brake / With Intermediate Stop Function | Environment, Applications | Standard |
| Cushion | Rubber cushion | Operating Pressure(MPa) | 0.08 to 0.7 | Locking Direction | Bidirectional |
Specification/Dimensions
-
Stroke(mm)
-
Specifications
- Built-in magnet
- Without magnet
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 3
- 5
-
The number of the switches
-
Head Cover Port Position
- 90° to axis
- Axial direction
-
Type of Mount Support
- Axial foot type
- Basic type
- Rod-end flange type
- U-Shaped Clevis Type
-
Lock actuation system
- Pneumatic Lock (Pressurized Locking)
- Spring locking (exhaust locking)
- Spring/pneumatic combination lock
-
type
- CDLJ2
- CLJ2
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- General type super micro cylinder SCM series
- Air Cylinder, Short Type, Standard, Double Acting, Single Rod CM3 Series
- Air Cylinder, Non-Rotating Rod Type, Double Acting, Single Rod MBK Series
- Air Cylinder, Air-Hydro Type, Double Acting, Single Rod CA2□H Series
- Air Cylinder, Standard Type: Double Acting, Single Rod CM2 Series
- CS1W Series Double Rod Type Air Cylinder, Lube / Non-Lube Type, Air-Hydro Type
- Fine Lock Cylinder, Double Acting, Single Rod CLG1 Series
- Improved Water Resistance, Square Tube Type Air Cylinder, Standard Type, Double Acting / Single Rod, MB1 Series
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy