(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
Tel: (60) 3 7890 6399
9am – 6pm (Mon – Fri), 9am – 1pm (Sat)
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Order / Quote
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 15/12/2024 to 6:00 (MYT) 16/12/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Mechanically Jointed Rodless Cylinder, Linear Guide Type, MY2H/HT Series (Part Numbers)
A linear guide type of Mechanically Jointed Rodless Cylinder that is both low profile and compact.
[Features]
· Thickness has been reduced without losing carrying capacity.
· Reduced cylinder height.
(i)Caution
- Refer to the catalog for product specifications.
- Product pictures are representations. CAD data is not supported by some of the model numbers.
Part Number
Configured Part Number is shown.
Mechanically Jointed Rodless Cylinder, Linear Guide Type, MY2H/HT Series Details
Mechanically Jointed Rodless Cylinder, Linear Guide Type, MY2H/HT Series Product Image
Mechanically Jointed Rodless Cylinder, Linear Guide Type, MY2H/HT Series Specifications
| Tube inner diameter (mm) | 16 | 25 | 40 |
|---|---|---|---|
| Usable fluids | Air | ||
| Operating type | Double-acting type | ||
| Operating pressure range | 0.15 to 0.8 MPa | 0.1 to 0.8 MPa | |
| Guaranteed pressure resistance | 1.2 MPa | ||
| Ambient temperature and working fluid temperature | 5 to 60°C | ||
| Cushion | Air cushion, shock absorber | ||
| Lubrication | Not required (lubrication-free) | ||
| Allowable difference of stroke length | +1.8 0 | ||
| Piping connection port diameter | M5 × 0.8 | Rc 1/8 | Rc 1/4 |
Model number indication method
Model number example
Made-to-order specifications
| Display symbol | Specifications/details |
|---|---|
| -X168 | Helical coil insert screw specifications |
Made-to-order specifications
| Display symbol | Specifications/details |
|---|---|
| -XB10 | Intermediate stroke (dedicated body used) |
| -XB11 | Long stroke type |
| -XB20 | Stroke adjustment unit with adjusting bolt |
| -XB22 | Shock absorber / soft type RJ series-equipped |
| -XC56 | Includes dowel pins |
Single-axis type / MY2H structural drawing
Single-axis type / MY2H structural drawing
Components
| Number | Part name | Materials | Additional notes |
|---|---|---|---|
| 1 | Cylinder tube | Aluminum alloy | Hard anodized aluminum |
| 2 | Track base | Aluminum alloy | Anodized aluminum |
| 3 | Head cover WR | Aluminum alloy | Hard anodized aluminum |
| 4 | Head cover WL | Aluminum alloy | Hard anodized aluminum |
| 5 | Slide table | Aluminum alloy | Hard anodized aluminum |
| 6 | Piston yoke | Aluminum alloy | Hard anodized aluminum |
| 7 | Piston | Aluminum alloy | Chromate |
| 8 | Wear ring | Special resin | - |
| 9 | Belt separator | Special resin | - |
| 10 | Parallel pin | Stainless steel | - |
| 11 | Cushion ring | Aluminum alloy | Anodized aluminum |
| 12 | Cushion needle | Rolled steel | Nickel plating |
| 13 | Belt clamp | Special resin | - |
| 16 | Guide | - | - |
| 17 | End cover | Aluminum alloy | Hard anodized aluminum |
| 19 | Bearing | Special resin | - |
| 20 | End plate | Aluminum alloy | Hard anodized aluminum |
| 21 | Stopper | Carbon steel | Nickel plating after quenching |
| 22 | Top cover | Stainless steel | - |
| 23 | Magnet | - | - |
| 24 | Magnet | - | - |
| 25 | Seal magnet | Rubber magnet | - |
| 26 | Square nut | Carbon steel | Chromate |
| 27 | Square nut | Carbon steel | Chromate |
| 28 | Spring pin | Carbon tool steel | - |
| 29 | Parallel pin | Stainless steel | - |
| 30 | Hex socket set screw | Chrome molybdenum steel | Black zinc chromate plated |
| 31 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 32 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 33 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 34 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 35 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 36 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 37 | Hex socket head bolt | Chrome molybdenum steel | Chromate |
| 38 | Steel ball | Spring steel material | Nickel plating |
| 44 | Hex socket head taper plug (tapered) | Carbon steel | Chromate |
| 45 | Hex socket head taper plug (tapered) | Carbon steel | Chromate |
| 46 | Lub-retainer | Special resin | - |
Double-axis type / MY2HT structural drawing
Double-axis type / MY2HT structural drawing
Replacement parts / seal kit
| Number | Part name | Quantity | MY2H16G/MY2HT16G | MY2H25G / MY2HT25G | MY2H40G / MY2HT40G |
|---|---|---|---|---|---|
| 14 | Seal belt | 1 | MY16-16C-[stroke] | MY25-16C-[stroke] | MY40-16C-[stroke] |
| 15 | Dust seal band | 1 | MY2H16-16B-[stroke] | MY2H25-16B-[stroke] | MY2H40-16B-[stroke] |
| 43 | O-ring | 2 | KA00309 | KA00309 | KA00320 |
| (ø4 (diameter 4 mm) × ø1.8 (diameter 1.8 mm) × ø1.1 (diameter 1.1 mm)) | (ø4 (diameter 4 mm) × ø1.8 (diameter 1.8 mm) × ø1.1 (diameter 1.1 mm)) | (ø7.15 (diameter 7.15 mm) × ø3.75 (diameter 3.75 mm) × ø1.7 (diameter 1.7 mm)) | |||
| 18 | Scraper | 2 | MY2B16-PS | MY2B25-PS | MY2B40-PS |
| 39 | Piston packing | 2 | |||
| 40 | Cushion seal | 2 | |||
| 41 | Tube gasket | 2 | |||
| 42 | O-ring | 4 |
- *Because the seal kit includes (18), (39), (40), (41) and (42), order using the order number of each tube inner diameter.
- *The seal kit includes a grease pack (10 g).
A grease pack (20 g) is included when (14) or (15) are shipped as single items.
When just the grease pack is required, please order using the part number below.
Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g)
Mechanically Jointed Rodless Cylinder, Linear Guide Type, MY2H/HT Series Example Dimensions
MY2H tube inner diameter and G-stroke dimensional drawing
(Unit: mm)
| Model | A | B | C | G | GB | H | L | J | LA | LB | LD | LE | (LL) | LW | M | MM | N | NC | NE | NH | NT | NV | NW | NX | P |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MY2H16G | 80 | 6.5 | 3.3 | 8.5 | 17 | 28 | 80 | M3 × 0.5 | 70 | 50.4 | 3.4 | 4 | 40 | 83 | 7 | M4 × 0.7 | 20 | 14 | 27 | 2 | 3.5 | 3.4 | 48.2 | 5.8 | M5 × 0.8 |
| MY2H25G | 105 | 9.5 | 5.4 | 10.7 | 19.5 | 37 | 110.8 | M5 × 0.8 | 100 | 71.7 | 5.5 | 5 | 49.6 | 123 | 9 | M5 × 0.8 | 25 | 21.3 | 35.5 | 3 | 5.3 | 5.5 | 71.8 | 8.5 | 1/8 |
| MY2H40G | 165 | 14 | 32.5 | 15.5 | 31.5 | 58 | 180 | M6 × 1 | 158 | 80.3 | 9 | 6 | 75 | 161 | 13 | M6 × 1 | 40 | 32.4 | 56.5 | 4 | 6.5 | 6.6 | 82.1 | 10.5 | 1/4 |
(Unit: mm)
| Model | PA | PB | PC | PD | PE | PF | PG | PH | PP | Q | QW | R | RR | RW | SS | TT | U | UU | VV | X | XX | Y | Z | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MY2H16G | 40 | 40 | 7.2 | 2.8 | 3.7 | 3.5 | 4 | 5.1 | 5.3 | 152 | 16.4 | 40 | 5 | 5.3 | 40 | 9.7 | 12.5 | 4 | 3 | 10.5 | 6 | 12 | 5 | 160 |
| MY2H25G | 60 | 60 | 8.2 | 6.6 | 2.7 | 5.5 | 6 | 7.5 | 8 | 198 | 20.4 | 60 | 5 | 8.5 | 50 | 14 | 19.3 | 5 | 4.4 | 15.3 | 7.5 | 14 | 5 | 210 |
| MY2H40G | 100 | 70 | 5.5 | 8.5 | 5 | 17 | 9 | 9.5 | 16 | 312 | 25.5 | 57 | 8 | 11 | 53.5 | 21.5 | 35.4 | 6 | 2 | 29 | 9 | 23 | 8 | 330 |
- *"P" indicates the cylinder supply port.
- *The plug of the "P" of MY2H16G is a hex socket plug.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Stroke (mm) | Table Material | Max. Load Mass (Horizontal Mounting) (kg) | Max. Load Mass (kg) | Table Size: Length L (mm) | Cylinder I.D. (Ø) | Environment | Table Surface Treatment | Guide Type | Table Size: Width W (mm) | Table Size: Height H (mm) | Piping Format | Port Screw Type | Specifications | Auto Switches | Lead Wire Length (m) | Lead Wire Connector | The number of the switches | Custom-made Specifications | Stroke adjustment unit symbol | Made-to-order |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 150 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | LS | None | ||
- | 1 Piece(s) | Quote | 150 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | LS | None | ||
- | 1 Piece(s) | Quote | 154 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 155 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 155 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 160 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 170 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BA | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 175 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 3 | - | 1 | 0.1 to 0.8 | No unit | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 175 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 0.5 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 175 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9PWV | 0.5 | M12 4‑pin A cord (normal key) plug connector | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 180 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 185 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
MYR 9,375.65 | 1 Piece(s) | 21 Day(s) | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 3 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 3 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 5 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9NV | 0.5 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | No unit | Stroke-adjustment unit with adjustment-bolt specification | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BAV | 0.5 | - | 2 | 0.1 to 0.8 | H6 | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93V | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BA | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BA | 3 | - | 2 | 0.1 to 0.8 | H | Stroke-adjustment unit with adjustment-bolt specification | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Stroke-adjustment unit with adjustment-bolt specification | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 3 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 0.5 | M8 3‑pin plug connector | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 0.5 | M12 4‑pin A cord (normal key) plug connector | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9NW | 0.5 | M12 4‑pin A cord (normal key) plug connector | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | HS | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | HS | None | ||
MYR 10,476.58 | 1 Piece(s) | 21 Day(s) | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 3 | - | 2 | 0.1 to 0.8 | L | Helical coil insert thread specification | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93V | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BA | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BA | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BA | 0.5 | M12 4‑pin A cord (normal key) plug connector | 2 | 0.1 to 0.8 | L | None | ||
MYR 10,888.02 | 1 Piece(s) | 21 Day(s) | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BWV | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9NV | 0.5 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 200 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9NW | 3 | - | 2 | 0.1 to 0.8 | L | None | ||
- | 1 Piece(s) | Quote | 210 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 210 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 210 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 215 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9NV | 0.5 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 220 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 220 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 220 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 1 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 225 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 225 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 230 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | No unit | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 230 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 230 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 230 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 230 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 0.5 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 230 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | L | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 235 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
- | 1 Piece(s) | Quote | 240 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | Intermediate stroke (using dedicated body) | ||
MYR 9,720.43 | 1 Piece(s) | 21 Day(s) | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 0.5 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 5 | - | 2 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 5 | - | 1 | 0.1 to 0.8 | No unit | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | None | - | - | - | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 0.5 | - | 2 | 0.1 to 0.8 | H7H6 | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A90 | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | A93 | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 0.5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 3 | - | 2 | 0.1 to 0.8 | H | Stroke-adjustment unit with adjustment-bolt specification | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BV | 3 | - | 2 | 0.1 to 0.8 | H | Stroke-adjustment unit with adjustment-bolt specification | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9BW | 3 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9B | 5 | - | 2 | 0.1 to 0.8 | H | None | ||
- | 1 Piece(s) | Quote | 250 | [Aluminum] Aluminum Alloy | 60~80 | 62 | 180 | 40 | General Purpose | [Anodize] Hard Anodize | [Rolling Guide] Linear guide 1 axis | 161 | 58 | Centralized piping type | Rc | Magnet built-in | M9N | 3 | - | 2 | 0.1 to 0.8 | H | None |
Loading...
Basic Information
| Type | Rodless Cylinder | Rodless Cylinder Joint Type | Mechanically Jointed |
|---|
Specification/Dimensions
-
Stroke(mm)
- 1,000
- 1,005
- 1,050
- 1,070
- 1,100
- 1,190
- 1,200
- 1,240
- 1,300
- 1,308
- 1,500
- 50
- 51
- 55
- 60
- 63
- 65
- 70
- 72
- 75
- 80
- 84
- 85
- 90
- 92
- 95
- 99
- 100
- 101
- 103
- 105
- 107
- 108
- 110
- 113
- 115
- 120
- 122
- 125
- 130
- 132
- 135
- 138
- 140
- 141
- 145
- 150
- 151
- 154
- 155
- 156
- 160
- 165
- 168
- 170
- 171
- 172
- 175
- 180
- 184
- 185
- 188
- 190
- 191
- 194
- 195
- 200
- 201
- 205
- 208
- 210
- 213
- 215
- 216
- 218
- 220
- 224
- 225
- 226
- 229
- 230
- 232
- 235
- 239
- 240
- 245
- 250
- 251
- 254
- 255
- 256
- 257
- 260
- 265
- 267
- 270
- 275
- 280
- 282
- 285
- 290
- 291
- 292
- 295
- 300
- 301
- 305
- 308
- 310
- 314
- 315
- 320
- 324
- 325
- 330
- 335
- 338
- 340
- 344
- 345
- 350
- 351
- 353
- 354
- 355
- 356
- 360
- 365
- 370
- 371
- 375
- 380
- 385
- 388
- 390
- 395
- 400
- 401
- 405
- 407
- 410
- 415
- 420
- 425
- 427
- 430
- 435
- 436
- 437
- 440
- 450
- 451
- 454
- 455
- 460
- 463
- 465
- 470
- 474
- 475
- 480
- 482
- 485
- 490
- 500
- 502
- 505
- 508
- 510
- 515
- 520
- 525
- 530
- 535
- 536
- 540
- 545
- 550
- 555
- 557
- 560
- 564
- 565
- 566
- 567
- 570
- 575
- 576
- 580
- 585
- 590
- 600
- 601
- 605
- 610
- 615
- 620
- 625
- 630
- 631
- 635
- 640
- 645
- 650
- 651
- 655
- 658
- 660
- 665
- 670
- 675
- 680
- 685
- 690
- 700
- 701
- 705
- 710
- 711
- 715
- 720
- 725
- 730
- 732
- 735
- 740
- 745
- 750
- 755
- 760
- 762
- 765
- 770
- 775
- 776
- 778
- 780
- 785
- 790
- 800
- 805
- 810
- 815
- 817
- 820
- 823
- 825
- 830
- 835
- 840
- 845
- 850
- 860
- 865
- 870
- 875
- 880
- 885
- 890
- 895
- 900
- 905
- 910
- 915
- 920
- 925
- 930
- 935
- 940
- 950
- 960
- 965
- 966
- 970
- 975
- 980
- 995
- 1010
- 1020
- 1030
- 1038
- 1060
- 1065
- 1075
- 1077
- 1080
- 1090
- 1110
- 1112
- 1115
- 1120
- 1125
- 1129
- 1130
- 1140
- 1150
- 1155
- 1160
- 1165
- 1170
- 1180
- 1185
- 1210
- 1220
- 1225
- 1230
- 1250
- 1270
- 1280
- 1288
- 1290
- 1310
- 1320
- 1325
- 1330
- 1340
- 1350
- 1365
- 1375
- 1380
- 1400
- 1410
- 1420
- 1450
- 1460
- 1470
-
Table Material
- Aluminum
- Aluminum
-
Max. Load Mass(kg)
-
Table Size: Length L(mm)
-
Cylinder I.D.(Ø)
-
Environment
- General Purpose
-
Table Surface Treatment
- Anodize
- Anodize
-
Guide Type
- Rolling Guide
- Rolling Guide
-
Table Size: Width W(mm)
-
Table Size: Height H(mm)
-
Piping Format
- Centralized piping type
-
Port Screw Type
-
Specifications
- Magnet built-in
-
Auto Switches
-
Lead Wire Length(m)
- 0.5
- 1
- 3
- 5
-
Lead Wire Connector
- M8 3‑pin plug connector
- M8 4‑pin plug connector
- M12 4‑pin A cord (normal key) plug connector
-
The number of the switches
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Custom-made Specifications
-
Stroke adjustment unit symbol
-
Made-to-order
- Helical coil insert thread specification
- Intermediate stroke (using dedicated body)
- Intermediate stroke (using dedicated body) + stroke-adjustment unit with adjustment bolt
- Long-stroke type
- None
- Shock absorber / soft-type RJ Series mounted cylinder
- Stroke-adjustment unit with adjustment-bolt specification
- With dowel holes
-
type
- MY2H
- MY2HT
-
Max. Load Mass (Horizontal Mounting)(kg)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 29 Day(s) or Less
- 41 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Air Slide Table / MXS Series
- Compact Slide MXH Series
- Mechanically Jointed Rodless Cylinder, Cam Follower Guide Type, MY1C Series
- Mechanically Jointed Rodless Cylinder, Linear Guide Type MY1H Series
- Mechanically Jointed Rodless Cylinder, Basic Type, MY3A/3B Series
- Mechanical Joint Type Rodless Cylinder, Basic Type Rechargeable Battery Compatible 25 A-MY1B Series
- Air Slide Table, Rechargeable Battery Compatible 25 A-MXS Series
- Air Slide Table, Compatible With Rechargeable Battery 25A-MXQ Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy