(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Air Suction Filter ZFA Series
ZFA-series air suction filter with a large element filtration area.
[Features]
· Prevents vacuum equipment trouble due to solid foreign objects.
· Solid foreign objects are collected in the element and do not remain in the case.
· Adaptable for up to 10 manifold applications.
· Can be installed in any direction.
· Cartridge type that allows easy replacement of elements.
[Applications]
· Can be used in ejector systems and vacuum pump systems.
(i)Caution
- The product images are representative images only. CAD data is not available for some models.
Part Number
Configured Part Number is shown.
Air Suction Filter ZFA Series Details
ZFA100 product image
ZFA200 product image
Air Suction Filter ZFA Series Specifications
Model
| Model | Port Size | Recommended flow rate L/min (ANR)Note) | Weight kg | Volume cm3 |
|---|---|---|---|---|
| ZFA100 | 1/8 | 50 | 0.14 | 30 |
| ZFA200 | 1/4 | 200 | 0.19 | 49 |
Note) Flow rate when initial pressure drop is 3 kPa or less
Specifications
| Usable FluidsNote 1) | Air, nitrogen |
|---|---|
| Operating Pressure Range | -100 to 0 kPa |
| Vacuum release pressureNote 2) | MAX. 0.5 MPa (unable to hold when pressurized) |
| Operating and Ambient Temperature Range | 5 to 60°C |
| Filtration Accuracy | 30 μm (filtration efficiency 95%) |
| Element Replacement Differential Pressure | 20 kPa |
Note 1) Do not use the product in an atmosphere or place where there is direct contact with chemicals. It may cause damage to the body. (Alcohol, acetone, etc., also cause damage and must be kept away from the product.)
Note 2) Do not use in lines that are kept in a pressurized state, as this may cause damage to the body.
Bracket Set Part Number
| Applications | ZFA100 | ZFA200 | Note | |
|---|---|---|---|---|
| For single units | One side | BP-1H-1A | BP-1H-2A | Bolts, nuts and washers included |
| Both sides | ZZFA1-01 | ZZFA2-01 | ||
| For manifold (2 to 10 stations) (both sides) | ZZFA1- [stations]Note 1) | ZZFA2- [stations]Note 1) | ||
Note 1) Insert a 2-digit number in the stations section while referring to the example. (E.g.) For 6 stations → 06
Model Number Indication System
Representative model number
Structural Diagram
Air Suction Filter ZFA Series structural diagram
Replacement Elements and Gasket Part Number
| Part Name | Part Number | |
|---|---|---|
| ZFA100 | ZFA200 | |
| Gasket | AL-204H | AL-205H |
| Element | EJ001H-030N | EJ101H-030N |
Element Size
| Element Size mm | 43 × 42 × 12 | 43 × 40 × 22 |
|---|
Air Suction Filter ZFA Series Dimensions
ZFA series / ZFA 100 -□□□ / ZFA 200 -□□□ (single unit)
(Unit: mm)
ZFA series / ZFA 100 -□□□ / ZFA 200 -□□□ (single unit) dimensional drawing
Note)The diagram above shows the ZFA200 type.
- *The bracket mounting position indicates the L side.
| Model | Symbol | ||
|---|---|---|---|
| Port Size | A | B | |
| ZFA100 | 1/8 | - | 18 |
| ZFA200 | 1/4 | 20 | 28 |
ZFA series / ZFA 100 -□□□ / ZFA 200 -□□□ (manifold)
(Unit: mm)
ZFA series / ZFA 100 -□□□ / ZFA 200 -□□□ (manifold) dimensional drawing
| Model | Symbol | ||
|---|---|---|---|
| Port Size | A | B | |
| ZFA100 | 1/8 | 19 | 18 |
| ZFA200 | 1/4 | 24 | 28 |
| Model | Symbol | Single unit Note) | Number of manifold stations | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |||
| ZFA100 | L1 | 38 | 56 | 74 | 92 | 110 | 128 | 146 | 164 | 182 | 200 |
| L2 | 50 | 68 | 86 | 104 | 122 | 140 | 158 | 176 | 194 | 212 | |
| ZFA200 | L1 | 48 | 76 | 104 | 132 | 160 | 188 | 216 | 244 | 272 | 300 |
| L2 | 60 | 88 | 116 | 144 | 172 | 200 | 228 | 256 | 284 | 312 | |
Note)When left and right brackets are attached to a single air suction filter.
| Part Number |
|---|
| ZFA100-F01 |
| ZFA100-F01L |
| ZFA100-F01LR |
| ZFA100-F01R |
| ZFA200-F02 |
| ZFA200-F02L |
| ZFA200-F02R |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Type | Filtration Level | Application | Removal Subject | Filter Replacement | Connection Type (IN Side) | Plumbing Thread Nominal (IN Side) | Bracket | Recommended flow rate (L/min (ANR)) | Compatible Models | Number of stations | Related Component Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 203.93 | 1 Piece(s) | 21 Day(s) | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/8 | No | 50 | - | - | - | ||
- | 1 Piece(s) | Quote | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/8 | Comes with 1 left-side bracket | 50 | - | - | - | ||
- | 1 Piece(s) | Quote | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/8 | With both left and right sides | 50 | - | - | - | ||
- | 1 Piece(s) | Quote | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/8 | Comes with 1 right-side bracket | 50 | - | - | - | ||
MYR 214.10 | 1 Piece(s) | 21 Day(s) | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/4 | No | 200 | - | - | - | ||
MYR 234.40 | 1 Piece(s) | 21 Day(s) | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/4 | Comes with 1 left-side bracket | 200 | - | - | - | ||
MYR 234.40 | 1 Piece(s) | 21 Day(s) | Manifold shaped | 30μm | [Vacuum Line] Vacuum Line | Dust | Acceptable | G | 1/4 | Comes with 1 right-side bracket | 200 | - | - | - |
Loading...
Specification/Dimensions
-
Type
- Manifold shaped
- Filter Element
- Metal fittings
-
Filtration Level
- 30μm
-
Application
- Vacuum Line
- Vacuum Line
-
Removal Subject
- Dust
-
Filter Replacement
- Acceptable
-
Plumbing Thread Nominal (IN Side)
- 1/8
- 1/4
-
Bracket
- Comes with 1 left-side bracket
- Comes with 1 right-side bracket
- No
- With both left and right sides
-
Recommended flow rate(L/min (ANR))
- 50
- 200
-
Compatible Models
- ZFA100
- ZFA200
-
Number of stations
-
Related Component Type
- For bracket set / manifold (2 to 10 units) (both sides)
- Bracket set / for single unit (both sides)
- Bracket set / for single unit (one side)
- Element
- Gasket
-
type
- AL
- BP
- EJ001H
- EJ101H
- ZFA100
- ZFA200
- ZZFA1
- ZZFA2
-
Connection Type (IN Side)
- Rc(Rp)
- NPTF
- G
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 9 Day(s) or Less
- 14 Day(s) or Less
- 21 Day(s) or Less
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Vacuum Filter for Generator with Vacuum Break Function
- Vacuum Filter/Small/Filter/Replacement Element
- Vacuum Filter VSFB/VSFU/VSFJ Series
- Filter VF Series for Vacuum Use, maintenance part elements
- Vacuum filter VF series
- Ultra Small Size Inline Filter for Use with Vacuum Operations, VFL-M5
- Exhaust Cleaner For Vacuum Pump AMV Series
- Vacuum Filter AFJ20 to AFJ40
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy