(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Compact/Lightweight 2-Port Solenoid Valve VDW30/40-XF Series
A valve manufactured by SMC.
[Features]
· For air and water.
Lightweight and compact resin body (PPS).
· Power consumption: 3 W (standard), 0.5 W (with power saving circuit).
· Enclosure: IP65.
· Reduces piping work (quick fastener body / one-touch fitting body).
[Applications]
· Use in fuel cell co-generation systems, dispensers and automatic water faucets.
(i)Caution
- Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Part Number
Configured Part Number is shown.
Compact/Lightweight 2-Port Solenoid Valve VDW30/40-XF Series Details
Compact/Lightweight 2-Port Solenoid Valve VDW30/40-XF Series product image
Compact/Lightweight 2-Port Solenoid Valve VDW30/40-XF Series Specifications
Model Number Notation
Model number examples
Quick Fastener Clip Part Numbers
| Series | Size | Quick Fastener Clip Part Number (with 2 pcs.) | Material |
|---|---|---|---|
| 30 | Quick Fastener P7 | VDW30-CP7 | SUS |
| 40 | Quick Fastener P10 | VDW40-CP10 |
Standard Specification
| Valve Specifications | Valve Structure | Direct operated poppet | |
|---|---|---|---|
| Valve Type | Normally closed (N.C.) | ||
| Fluid | Quick Fastener Type | Water (1 to 50°C), air, hot water (80°C)*3, low vacuum (133 Pa·abs) | |
| One-Touch Fitting Type*4 | Air, water (1 to 40°C)*5, low vacuum (133 Pa·abs) | ||
| Withstand Pressure | 1.0 MPa | ||
| Ambient Temperature | -10 to 50°C | ||
| Fluid Temperature | 1 to 50°C (no freezing) | ||
| Ambient Humidity | 85% RH | ||
| Environment | Locations without corrosive or explosive gases | ||
| Valve Leakage*1 | 0.1 cm3/min or less (with hydraulic pressure), 1 cm3/min or less (with pneumatic pressure) | ||
| Exterior Leakage | 0.1 cm3/min or less (with hydraulic pressure), 1 cm3/min or less (with pneumatic pressure) | ||
| Mounting Orientation | Upward facing coil | ||
| Vibration/Impact*2 | 30 m/s2 / 90 m/s2 | ||
| Piping Connection Port Diameter | P7, P10 (quick fastener) C4, C6, C8, C10 (one-touch fitting) | ||
| Orifice Diameter | ø1 mm, ø3 mm, ø4.5 mm, ø6 mm | ||
| Coil Specifications | Rated Voltage | 24, 12 V DC | |
| Allowable Voltage Fluctuation | ±10% of rated voltage | ||
| Coil Insulation Type | Class B | ||
| Insulation Resistance | 500 V DC, 10 MΩ or more | ||
| Withstand Voltage | 1,800 V AC, 1 sec, 3 mA or less | ||
| Noise Tolerance*3 | Simulator noise: 500 V p-p, Pulse width: 1 μsec Based on frequency 50 ±10‑Hz noise simulator | ||
| First transition noise IEC61000-4-4: 1 kV | |||
| Power Consumption | VDW30: 3 W (with 0.5‑W power-saving circuit) VDW40: 6.5 W (with 1‑W power-saving circuit) | ||
| Enclosure | IP65*6 | ||
*1: Amount of leakage from the OUT port side when pressure is applied to the IN port.
*2: Vibration-resistance: No malfunction when tested with 1 sweep of 10 to 150 Hz in the axial direction and at a right angle to the armature in both energized and non-energized states.
*2: Impact-resistance: No malfunction when tested with a drop tester in the axial direction and at a right angle to the main armature, one time each in an energized and non-energized state.
*3: Applies only to products with a power-saving circuit.
*4: If using one-touch fitting types, use a tube that is compatible with SMC fittings (KQ2 Series).
*5: When using one-touch fittings with water, care must be taken when handling piping and tubing conditions to prevent water from leaking when the tubes are inserted. Also, soft nylon tubes cannot be used with water.
*6: Contact SMC regarding use in locations that require water resistance.
Characteristics Specifications
| Model | Piping Connection Type | Orifice Diameter mm ø | Maximum Operating Pressure Differential MPa *1 | Operating Pressure Range MPa*2, *3 | Weight kg |
|---|---|---|---|---|---|
| Pressure Port 1 | |||||
| VDW30 | P7 C4, C6 | 1.0 | 0.6 | -0.1 to 0.6 | 0.1 |
| 3.0 | 0.1 | ||||
| VDW40 | P10 C8, C10 | 4.5 | 0.1 (with power-saving circuit) | 0.23 | |
| 0.05 (without power-saving circuit) | |||||
| 6.0 | 0.05 (with power-saving circuit) | ||||
| 0.02 (without power-saving circuit) |
*1: The maximum operating pressure differential varies depending on the flow direction of the fluid.
*2: The operating pressure range is from 1 Torr (1.33 × 102 Pa) to 0.6 MPa for low vacuum specifications. Check with SMC if using at 1 Torr (1.33 × 102 Pa) or less. Do not use in situations when a vacuum must be maintained such as for leak testing as the product does permit some leakage.
*3: The surge pressure should be kept to the maximum operating pressure or lower.
Flow Rate Characteristics
| Model | Piping Connection Type | Orifice Diameter mm ø | Water | Air | |||
|---|---|---|---|---|---|---|---|
| 1 → 2 (IN → N.C.) | 1 → 2 (IN → N.C.) | ||||||
| N.C. | Kv | Conversion Cv | C (dm3/[s·bar]) | b | Cv | ||
| VDW30 | P7, C4, C6 | 1.0 | 0.03 | 0.04 | 0.14 | 0.4 | 0.09 |
| 3.0 | 0.24 | 0.28 | 1.0 | 0.52 | 0.3 | ||
| VDW40 | P10, C8, C10 | 4.5 | 0.54 | 0.61 | 2.3 | 0.46 | 0.61 |
| 6.0 | 0.86 | 1.0 | 4.0 | 0.4 | 1.1 | ||
Diagram
Compact/Lightweight 2-Port Solenoid Valve VDW30/40-XF Series diagram
Component Part Materials
| Number | Part Name | Material |
|---|---|---|
| 1 | Body | PPS |
| 2 | Tube Assembly | SUS |
| 3 | Coil Assembly | - |
| 4 | Armature Assembly | SUS, NBR, FKM, EPDM |
| 5 | Return Spring | SUS |
| 6 | Frame | Iron |
| 7 | O-Ring | NBR, FKM, EPDM |
| 8 | Round Head Combination Screws | Iron |
| 9 | Cassette | POM, SUS |
| 10 | Seal | NBR, FKM, EPDM |
- *Do not disassemble.
Compact/Lightweight 2-Port Solenoid Valve VDW30/40-XF Series Dimensions Examples
VDW30-□G□□-□-P7 / Quick Fastener P7
(Units: mm)
VDW30-□G□□-□-P7 / Quick Fastener P7 dimensional drawing
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connection Type | Tube Dia. | Orifice Dia. (Ø) | Pipe opening type (details) | Power-saving circuit | Voltage | Sealing materials | Lead wire exit direction | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 144.80 | 1 Piece(s) | 21 Day(s) | Others | - | 1 | Quick Fastener P7 | None | 24 V DC | NBR | Piping direction | None | ||
MYR 169.07 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø4 | 3 | - | None | 24 V DC | NBR | Piping direction | With base mounting insert | ||
MYR 169.07 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø6 | 3 | - | None | 24 V DC | NBR | Piping direction | With base mounting insert | ||
MYR 157.15 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø6 | 3 | - | None | 24 V DC | NBR | Piping direction | None | ||
MYR 223.37 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø4 | 3 | - | With power-saving circuit | 24 V DC | NBR | Piping direction | With base mounting insert | ||
MYR 223.37 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø6 | 3 | - | With power-saving circuit | 24 V DC | NBR | Piping direction | With base mounting insert | ||
MYR 169.07 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø6 | 3 | - | None | 12 V DC | NBR | Piping direction | With base mounting insert | ||
MYR 157.15 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø6 | 3 | - | None | 12 V DC | NBR | Piping direction | None | ||
MYR 187.18 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø8 | 4.5 | - | None | 24 V DC | NBR | Piping direction | None | ||
MYR 187.18 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø10 | 4.5 | - | None | 24 V DC | NBR | Piping direction | None | ||
MYR 187.18 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø10 | 6 | - | None | 24 V DC | NBR | Piping direction | None | ||
MYR 169.07 | 1 Piece(s) | 21 Day(s) | Others | - | 6 | Quick Fastener P10 | None | 24 V DC | NBR | Piping direction | None | ||
MYR 241.48 | 1 Piece(s) | 21 Day(s) | Tube Connection | Ø10 | 6 | - | With power-saving circuit | 24 V DC | NBR | Piping direction | None |
Loading...
Basic Information
| Type | Electromagnetic Type | Applicable Fluid | Air / Water | Operating Environment | Standard |
|---|---|---|---|---|---|
| Switching Type | Normally Closed | Driving Type | Linear Motion Type | Operating Temperature Range(°C) | -10::50 |
| Number of Solenoids | Single Solenoid | Body Material | Resin | Application | Single Item |
| IP | IP65 | Acquired Standards | CE |
Specification/Dimensions
-
Connection Type
- Tube Connection
- Others
-
Tube Dia.
- Ø4
- Ø6
- Ø8
- Ø10
-
Orifice Dia.(Ø)
-
Pipe opening type (details)
- Quick Fastener P7
- Quick Fastener P10
-
Power-saving circuit
- None
- With power-saving circuit
-
Voltage
- 12 V DC
- 24 V DC
-
Sealing materials
- EPDM
- FKM
- NBR
-
Lead wire exit direction
- Left 45°
- Right 45°
- Left 90°
- Right 90°
- Piping direction
-
Option
- With base mounting insert / Quick fastener clips (2 pcs.)
- None
- With base mounting insert
-
type
- VDW31
- VDW41
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Pilot-Operated 2 port Electromagnetic Valve Multilex Valve ADK21 Series
- Explosion-Proof Direct Acting 2-port Solenoid Valve General-Purpose Valve AB41E4/AB42E4 Series
- WS-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II
- Compact Direct Operated 2 Port Solenoid Valve VDW Series
- Steam Valve, 2 Port Valve For Steam VND Series
- Zero Differential Pressure Type Pilot Operated 2 Port Solenoid Valve VXZ Series
- 3-Port Air Operated Valve VTA315 Series
- Air Operated Valve for Chemicals, Compact and Air Operated Type, Flare Type, Integrated Fittings LVD-F/FN Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy