(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Floating Joint, Heavy Load Type JAH Series (Part Numbers)
Floating joint that does not require axis alignment.
[Features]
・ Floating joint absorbs "misalignment" and "insufficient stage parallelism)" between the driven body and the cylinder
・ No need for high-grade processing accuracy
・ Significantly reduced installation work time
・ Compact and compatible with high load tension / compression force
・ Long lifespan (With dust-proof cover)
・ Rotating angle: ±5°
(i)Caution
- See catalog for specification details.
- Product images may be representative images. Refer to the catalog for details.
Part Number
Configured Part Number is shown.
Floating Joint: Heavy Load Type JAH Series Specifications
JAH Series external appearance
- Operating pressure: hydraulic cylinder 7 MPa or less
- Mounting: basic type, flange type, foot type
JAHL Series (foot type) external appearance
JAHF Series (flange type) external appearance
JAH Series operating range
| Model | Compatible bore size (mm) | Compatible cylinder nominal thread size | Maximum operating tension and compression force N | Allowable eccentricity U (mm) | Rotating angle | Ambient temperature | ||
|---|---|---|---|---|---|---|---|---|
| Basic type | Flange type | Foot | ||||||
| JAH□40-16-150 | 40 | M16 × 1.5 | 11,000 | 9,000 | 9,000 | 0.25 | ±5 ° | -5 to 60°C |
| JAH□50-20-150 | 50 | M20 × 1.5 | 18,000 | 14,000 | 14,000 | 2 | ||
| JAH□63-24-150 | 63 | M24 × 1.5 | 28,000 | 22,000 | 22,000 | 2 | ||
| JAH□80-30-150 | 80 | M30 × 1.5 | 54,000 | 36,000 | 36,000 | 2.5 | ||
| JAH□100-39-150 | 100 | M39 × 1.5 | 71,000 | 55,000 | 55,000 | 3 | ||
| JAH□100-48-150 | 100 | M48 × 1.5 | 71,000 | 55,000 | 55,000 | 3 | ||
| JAH□63-24-200 | 63 | M24 × 2 | 28,000 | 22,000 | 22,000 | 2 | ±5 ° | |
| JAH□80-30-200 | 80 | M30 × 2 | 54,000 | 36,000 | 36,000 | 2.5 | ||
| JAH□100-42-300 | 100 | M42 × 3 | 71,000 | 55,000 | 55,000 | 3 | ||
Diagram / Parts List
JAH Series Diagram
*See the manufacturer's catalog regarding replacement parts.
| Number | Number | Material | Note |
|---|---|---|---|
| 1 | Stud | Chrome molybdenum steel | Dyed black |
| 2 | Case | Carbon steel | Black zinc chromated |
| 3 | Ring | Chrome molybdenum steel | - |
| 4 | Cap | Carbon steel | Black zinc chromated |
| 5 | Dust cover | Synthetic rubber | - |
| 6 | Set screw | Carbon steel | Zinc chromate |
| 7 | Rod end nut | Carbon steel | Zinc chromate |
| 8 | Flange | Rolled steel plate | Black zinc chromated |
| 9 | Foot | Rolled steel plate | Black zinc chromated |
Basic Type / JAH40 to 100 dimensional drawing
JAH40 to 100 dimensional drawing
Without C-dimension
(Unit: mm)
Heavy‑Load Type / Hydraulic: Up to 7 MPa
| Compatible bore size | Model | M | A | B | C | D | E | F | G | H | Center of sphere R | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal diameter | Pitch | |||||||||||
| 40 | JAH40-16-150 | 16 | 1.5 | 85.5 | 22 | 25 | 50 | 9.5 | 19 | 16 | 32 | 52.5 |
| 50 | JAH50-20-150 | 20 | 1.5 | 101 | 28 | 31 | 59.5 | 11.5 | 24 | 16 | 32 | 64 |
| 63 | JAH63-24-150 | 24 | 1.5 | 120 | 32 | 35 | 66 | 13 | 27 | 20 | 41 | 74 |
| 80 | JAH80-30-150 | 30 | 1.5 | 152 | 42 | 45 | 79 | 14 | 30 | 22 | 46 | 94.5 |
| 100 | JAH100-39-150 | 39 | 1.5 | 178 | 52 | 55 | 96 | 16 | 36 | 24 | 55 | 112 |
| 100 | JAH100-48-150 | 48 | 1.5 | 191 | 61 | - | 96 | 16 | 36 | 28 | 70 | 118 |
| Compatible bore size | Model | Maximum thread depth P | Allowable eccentricity U | Maximum operating tension and compression force N | Weight kg |
|---|---|---|---|---|---|
| 40 | JAH40-16-150 | 18 | 1.25 | 11,000 | 0.58 |
| 50 | JAH50-20-150 | 18 | 2 | 18,000 | 1.08 |
| 63 | JAH63-24-150 | 24 | 2 | 28,000 | 1.5 |
| 80 | JAH80-30-150 | 38 | 2.5 | 54,000 | 2.7 |
| 100 | JAH100-39-150 | 42 | 3 | 71,000 | 4.8 |
| 100 | JAH100-48-150 | 49 | 3 | 71,000 | 5.4 |
| Compatible bore size | Model | M | A | B | C | D | E | F | G | H | Center of sphere R | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal diameter | Pitch | |||||||||||
| 63 | JAH63-24-200 | 24 | 2 | 120 | 32 | 35 | 66 | 13 | 27 | 20 | 41 | 74 |
| 80 | JAH80-30-200 | 30 | 2 | 152 | 41 | 45 | 79 | 14 | 30 | 22 | 46 | 94.5 |
| 100 | JAH100-42-300 | 42 | 3 | 178 | 55 | - | 96 | 16 | 36 | 24 | 55 | 112 |
| Compatible bore size | Model | Maximum thread depth P | Allowable eccentricity U | Maximum operating tension and compression force N | Weight kg |
|---|---|---|---|---|---|
| 63 | JAH63-24-200 | 24 | 2 | 28,000 | 1.5 |
| 80 | JAH80-30-200 | 38 | 2.5 | 54,000 | 2.7 |
| 100 | JAH100-42-300 | 42 | 3 | 71,000 | 4.8 |
Precautions
Mounting
- *When screwing the male threads of the rod into the female threads of the socket or the case, make sure that the rod does not bottom out. If the floating joint is used with its rod bottomed out, the stud will not be able to float, causing damage. For the screw-in depth of the female threads, refer to the dimensions in the manufacturer's catalog. As a rule, after the rod bottoms out, back off 1 to 2 turns.
- *The dust cover may stick to the stud. Move the dust cover at the base of the stud with your fingers, or twist the stud right and left gently to free it. When screwing the stud and socket or case into a driven body, make sure to remove the dust cover. Screwing without removing dust cover may break the dust cover.
- *When using a floating joint to connect the cylinder rod to a driven body, secure it in place by applying a torque that is appropriate for the thread size. Also, if there is a risk of loosening during operation, take measures to prevent loosening, such as using a locking pin or thread adhesive. In the event that the connected portion becomes loose, the driven body might lose control or fall off, etc., leading to equipment damage or injury to personnel.
- *This product is not a rotary joint. It cannot be used for rotational applications.
- *Be sure to use the cushion mechanism of the cylinder or a buffer mechanism such as a shock absorber to prevent impact force being applied to the floating joint when stopping the driven body. If there is no buffer mechanism, an impact force is generated that may cause the floating joint to exceed its maximum tensile and compressive force level.
Maintenance
- *Do not use if the product has been disassembled. High-strength adhesive is applied to the portion of the connection that is threaded to prevent it from loosening. The product must therefore not be disassembled. If the product is forcefully disassembled, it could lead to damage.
- *Black zinc chromate treatment is applied to the material surfaces of the case, flange and foot. In rare circumstances, white deposits may occur on the surface.
Other precautions
- *See the manufacturer's catalog for information other than the above.
- *Pictures are of representational models.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connecting Thread Nominal M (mm) | Connection Type, Work Piece Side | Connecting Thread Nominal P (mm) | Allowable Misalignment U (mm) | Metallic Head | Applicable cylinder bore size (ø) | Applicable cylinder nominal thread | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 417.17 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | Threaded | 1~1.75 | 1.25 | No | 40 | M16 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M10 ~ M18 | Threaded | 1~1.75 | 1.25 | No | 40 | M16 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 518.25 | 1 Piece(s) | 21 Day(s) | M20 ~ M26 | Threaded | 1~1.75 | 2 | No | 50 | M20 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Threaded | 1~1.75 | 2 | No | 50 | M20 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 691.73 | 1 Piece(s) | 21 Day(s) | M20 ~ M26 | Threaded | 1~1.75 | 2 | No | 63 | M24 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Threaded | 1~1.75 | 2 | No | 63 | M24 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 746.03 | 1 Piece(s) | 21 Day(s) | M20 ~ M26 | Threaded | 2~2.5 | 2 | No | 63 | M24 × 2 | None | ||
MYR 1,643.02 | 1 Piece(s) | 21 Day(s) | M30 ~ M36 | Threaded | 1~1.75 | 2.5 | No | 80 | M30 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M30 ~ M36 | Threaded | 1~1.75 | 2.5 | No | 80 | M30 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 1,698.63 | 1 Piece(s) | 21 Day(s) | M30 ~ M36 | Threaded | 2~2.5 | 2.5 | No | 80 | M30 × 2 | None | ||
- | 1 Piece(s) | Quote | M30 ~ M36 | Threaded | 2~2.5 | 2.5 | No | 80 | M30 × 2 | High-temperature specifications (-5 to +100°C) | ||
MYR 2,148.90 | 1 Piece(s) | 21 Day(s) | M38 to M39 | Threaded | 1~1.75 | 3 | No | 100 | M39 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M38 to M39 | Threaded | 1~1.75 | 3 | No | 100 | M39 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
- | 1 Piece(s) | Quote | M40 ~ M45 | Threaded | 2.5 or more | 3 | No | 100 | M42 × 3 | None | ||
MYR 2,589.35 | 1 Piece(s) | 46 Day(s) | M40 ~ M45 | Threaded | 2.5 or more | 3 | No | 100 | M42 × 3 | High-temperature specifications (-5 to +100°C) | ||
MYR 3,096.68 | 1 Piece(s) | 21 Day(s) | M48 | Threaded | 1~1.75 | 3 | No | 100 | M48 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M48 | Threaded | 1~1.75 | 3 | No | 100 | M48 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 531.05 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | Hole | 1~1.75 | 1.25 | Flange Hardware | 40 | M16 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M10 ~ M18 | Hole | 1~1.75 | 1.25 | Flange Hardware | 40 | M16 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 644.48 | 1 Piece(s) | 21 Day(s) | M20 ~ M26 | Hole | 1~1.75 | 2 | Flange Hardware | 50 | M20 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Hole | 1~1.75 | 2 | Flange Hardware | 50 | M20 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 834.30 | 1 Piece(s) | 21 Day(s) | M20 ~ M26 | Hole | 1~1.75 | 2 | Flange Hardware | 63 | M24 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Hole | 1~1.75 | 2 | Flange Hardware | 63 | M24 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Hole | 2~2.5 | 2 | Flange Hardware | 63 | M24 × 2 | None | ||
MYR 2,022.23 | 1 Piece(s) | 21 Day(s) | M30 ~ M36 | Hole | 1~1.75 | 2.5 | Flange Hardware | 80 | M30 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M30 ~ M36 | Hole | 1~1.75 | 2.5 | Flange Hardware | 80 | M30 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 2,077.83 | 1 Piece(s) | 21 Day(s) | M30 ~ M36 | Hole | 2~2.5 | 2.5 | Flange Hardware | 80 | M30 × 2 | None | ||
MYR 2,654.35 | 1 Piece(s) | 21 Day(s) | M38 to M39 | Hole | 1~1.75 | 3 | Flange Hardware | 100 | M39 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M38 to M39 | Hole | 1~1.75 | 3 | Flange Hardware | 100 | M39 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 2,709.98 | 1 Piece(s) | 21 Day(s) | M40 ~ M45 | Hole | 2.5 or more | 3 | Flange Hardware | 100 | M42 × 3 | None | ||
MYR 3,380.95 | 1 Piece(s) | 21 Day(s) | M48 | Hole | 1~1.75 | 3 | Flange Hardware | 100 | M48 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M48 | Hole | 1~1.75 | 3 | Flange Hardware | 100 | M48 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
MYR 531.05 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | Hole | 1~1.75 | 1.25 | Foot Hardware | 40 | M16 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Hole | 1~1.75 | 2 | Foot Hardware | 50 | M20 × 1.5 | None | ||
MYR 834.30 | 1 Piece(s) | 21 Day(s) | M20 ~ M26 | Hole | 1~1.75 | 2 | Foot Hardware | 63 | M24 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Hole | 1~1.75 | 2 | Foot Hardware | 63 | M24 × 1.5 | High-temperature specifications (-5 to +100°C) | ||
- | 1 Piece(s) | Quote | M20 ~ M26 | Hole | 2~2.5 | 2 | Foot Hardware | 63 | M24 × 2 | None | ||
MYR 2,022.23 | 1 Piece(s) | 21 Day(s) | M30 ~ M36 | Hole | 1~1.75 | 2.5 | Foot Hardware | 80 | M30 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M30 ~ M36 | Hole | 2~2.5 | 2.5 | Foot Hardware | 80 | M30 × 2 | None | ||
- | 1 Piece(s) | Quote | M38 to M39 | Hole | 1~1.75 | 3 | Foot Hardware | 100 | M39 × 1.5 | None | ||
- | 1 Piece(s) | Quote | M40 ~ M45 | Hole | 2.5 or more | 3 | Foot Hardware | 100 | M42 × 3 | None | ||
- | 1 Piece(s) | Quote | M48 | Hole | 1~1.75 | 3 | Foot Hardware | 100 | M48 × 1.5 | None |
Loading...
Basic Information
| Type | Floating Joints | Connection Type, Cylinder Side | Tapped | Applicable Cylinder | Hydraulic Cylinders |
|---|---|---|---|---|---|
| Main Body Material | Carbon steel | Allowable Angular Deviation(deg) | ±5 | Stud Material | Chrome molybdenum steel |
Specification/Dimensions
-
Connecting Thread Nominal M(mm)
-
Connection Type, Work Piece Side
-
Threaded -
Hole
-
-
Connecting Thread Nominal P(mm)
- 1~1.75
- 2~2.5
- 2.5 or more
-
Allowable Misalignment U(mm)
-
Metallic Head
-
No -
Flange Hardware -
Foot Hardware
-
-
Applicable cylinder bore size(ø)
- 40
- 50
- 63
- 80
- 100
-
Applicable cylinder nominal thread
- M16 × 1.5
- M20 × 1.5
- M24 × 1.5
- M24 × 2
- M30 × 1.5
- M30 × 2
- M39 × 1.5
- M42 × 3
- M48 × 1.5
-
Option
- High-temperature specifications (-5 to +100°C)
- None
-
type
- JAH
- JAHF
- JAHL
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 27 Day(s) or Less
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Floating Joints Integrated Type - Miniature
- Floating Joints, Quick Connection Type - [Threaded] Cylinder Connector - Separate Type
- Floating Joints, Flange Mounting - Flat Dual Mountable Side Flange and Cylinder Connector with 4 Sided Wrench Flats - Sets
- Holder Side - Mount, Flange Type
- Floating Joints - T Slots Tip Connection Joints - Threaded / Threaded, F Configurable
- Floating Joints Integrated Type - Round / Compact Type - Threaded
- Floating Joint Supporting Rechargeable Battery 25A-JA / JB / JS Series
- Low Profile Cylinder CQ2 Dedicated/Electric Actuator Rod Type LEY Dedicated Simple Joint
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy