(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Compact Direct Operated 3 Port Solenoid Valve S070 Series (S070C-VDG-32)
A 7‑mm width compact solenoid valve.
[Features]
· A 7‑mm width compact solenoid valve manifold.
· Valve unit weight: 5 g.
· Single unit specifications, base mounted type manifolds and body ported type manifolds are available.
· Manifold model number: SS073.
(i)Caution
- ■ SMC Air Cylinder Product Selection and Technical Information
The featured products page can be found here.
■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Part Number
Configured Part Number is shown.
S070C-VDG-32
Compact Direct-Operated 3-Port Solenoid Valve S070 Series Specifications
| Valve Construction | Poppet |
|---|---|
| Usable Fluids | Air / Low vacuum (1.33 × 102 Pa) |
| Maximum operating pressure | 0.3 MPa (0.35 W, 0.1 W), 0.5 MPa (0.5 W) |
| Pressure resistance | 1 MPa |
| Ambient and fluid temperature*1 | -10°C to +50°C |
| Lubrication | Not required |
| Vibration resistance / Impact resistance*2 | 30/150 m/s2 |
| Enclosure | IP40 |
| Weight | 5 g (Valve single unit) |
| Mounting Orientation | Free |
*1: Use dry air when operating at low temperatures and with no condensation.
*2: Vibration resistance: No malfunction occurred in 1 sweep test between 45 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the armature.
Impact resistance: No malfunction occurred when tested using a drop tester. The test was performed once for each condition, in both energized and de-energized states, in the axial and right angle directions of the armature.
*3: The operating pressure range for the vacuum specification spans from 1.33 × 102 Pa up to the maximum operating pressure differential.
Electrical Specifications
| Power consumption*1 | 0.35 W (Standard), 0.5 W (High-pressure specification), 0.1 W (Holding) |
|---|---|
| Coil Rated Voltage | 3, 5, 6, 12, 24 V DC |
| Allowable Voltage Fluctuation | ±10% of rated voltage |
| Coil insulation type | Class B or equivalent |
*1: In models with an indicator light / surge voltage suppressor and a power-saving circuit, the indicator light will consume 2 mA of power.
Flow Rate Characteristics / Response Time
| Power Consumption | Maximum operating pressure | Flow Rate Characteristics | Response Time ms *2,3 | |||
|---|---|---|---|---|---|---|
| C [dm3/(s·bar)] | b | Cv | ON | OFF | ||
| 0.5 W DC | 0.5 MPa | 0.042 | 0.27 | 0.011 | 3 or less | 3 or less |
| 0.3 MPa | 0.060 | 0.28 | 0.016 | 5 or less | 3 or less | |
| 0.35 W DC | 0.3 MPa | 0.042 | 0.27 | 0.011 | 3 or less | 3 or less |
| 0.1 MPa | 0.060 | 0.28 | 0.016 | 5 or less | 3 or less | |
| 0.1 W DC (holding) with power-saving circuit*1 | 0.3 MPa | 0.021 | 0.27 | 0.006 | 3 or less | 6 or less |
| 0.1 MPa | 0.042 | 0.28 | 0.011 | 5 or less | 6 or less | |
*1: At inrush (for 100 ms) 0.35 W DC, when holding 0.1 W DC.
*2: The response time value is at rated voltage, maximum operating pressure, normal ambient temperature and fluid temperature (≒25°C).
*3: If using the conditions or in the environments listed below, be aware that the valve switching time may be much slower than the values above.
- 1.First response time after a long period of disuse
- 2.Use with low supply pressure (0.1 MPa or less)
- 3.Use in an environment with a low ambient temperature and low fluid temperature (10°C or less)
Structure Drawing
S070B-□□G structure drawing
- *Base mounted (screw-mount) type shown.
Component Parts
| Number | Description | Material |
|---|---|---|
| 1 | Solenoid coil | - |
| 2 | Body | Resin |
| 3 | Fixed core | SUS |
| 4 | Armature assembly | SUS, resin |
| 5 | Return Spring | SUS |
| 6 | Poppet | FKM |
| 7 | Interface gasket | HNBR |
| 8 | Mounting screw | Carbon steel |
| 9 | Sub-plate | Aluminum |
Outline dimensional drawing
Base mounted with screws
(Unit: mm)
S070B-□□G-M3 Grommet Type drawings
S070B-□□C-M3 Plug Lead Type drawing
S070B-□□G-M5 Grommet Type dimensional outline drawings
S070B-□□C-M5 Plug Lead Type dimensional outline drawing
Body Ported Types
S070C-□□G-32 Grommet Type drawings
S070C-□□C-32 Plug Lead Type drawing
| Part Number |
|---|
| S070C-VDG-32 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Application | Mounting Orientation | Specifications | Switching Type | Status at Power Off | Voltage | Pipe Port Type | Plumbing Thread Nominal | Plumbing | Driving Type | CV Value | Connecting Tube Diameter | Lead wire electrical entry | Body type | Power consumption (W) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Single Use | Direct | Standard | 2-Position Normally Open | Self-Recovery (Pressure Differential Return) | DC6V | Barbed Couplers | - | Direct Plumbing | Linear Motion Spool | 0.011 | Ø3.2 | Grommet | - | 0.5 |
Loading...
Basic Information
| Type | Solenoid Valves | Number of Ports | 3-Port Valve | Number of Solenoids | Single |
|---|---|---|---|---|---|
| Seal Type | Soft Seal | Pressure Rating(MPa) | 1.0 | Manual Switch | Not Provided |
Please check the type/dimensions/specifications of the part S070C-VDG-32 in the Compact Direct Operated 3 Port Solenoid Valve S070 Series series.
Specification/Dimensions
-
Plumbing Thread Nominal
-
Body type
-
type
- S070
-
Application
- Single Use
- Unit for Manifold Mounting
-
Mounting Orientation
- Direct
- Manifold Base
-
Specifications
- Standard
- Low Vacuum Compatible
- Low Current
-
Switching Type
- 2-Position Normally Open
- 2-Position Normally Closed
-
Status at Power Off
- Self-Recovery (Spring Return)
- Self-Recovery (Pressure Differential Return)
-
Voltage
- DC12V
- DC24V
- DC5V
- DC6V
- DC3V
-
Pipe Port Type
- M
- Barbed Couplers
-
Plumbing
- Direct Plumbing
- Sub-Base Plumbing
-
Driving Type
- Linear Motion Poppet
- Linear Motion Spool
-
CV Value
-
Connecting Tube Diameter
- Ø3.2
- Ø4
-
Lead wire electrical entry
- Grommet
- Plug lead with indicator light / surge voltage suppressor
- Plug lead, without connector, with indicator light / surge voltage suppressor
- With plug lead, lamp and surge voltage suppressor
-
Power consumption(W)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 32 Day(s) or Less
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| S070B-5AC-M3 |
| S070B-5AC-M5 |
| S070B-5ACO |
| S070B-5ACO-M5 |
| S070M-6DCO-32 |
| S070M-6DCO-40 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Application | Mounting Orientation | Specifications | Switching Type | Status at Power Off | Voltage | Pipe Port Type | Plumbing Thread Nominal | Plumbing | Driving Type | CV Value | Connecting Tube Diameter | Lead wire electrical entry | Body type | Power consumption (W) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Single Use | Direct | Standard | 2-Position Normally Open | Self-Recovery (Pressure Differential Return) | DC24V | M | M3 | Sub-Base Plumbing | Linear Motion Spool | 0.016 | - | Plug lead with indicator light / surge voltage suppressor | - | 0.35 | ||
- | 1 Piece(s) | Quote | Single Use | Direct | Standard | 2-Position Normally Open | Self-Recovery (Pressure Differential Return) | DC24V | M | M5 | Sub-Base Plumbing | Linear Motion Spool | 0.016 | - | Plug lead with indicator light / surge voltage suppressor | - | 0.35 | ||
- | 1 Piece(s) | Quote | Unit for Manifold Mounting | Manifold Base | Standard | 2-Position Normally Open | Self-Recovery (Pressure Differential Return) | DC24V | - | - | Sub-Base Plumbing | Linear Motion Spool | 0.016 | - | Plug lead, without connector, with indicator light / surge voltage suppressor | - | 0.35 | ||
- | 1 Piece(s) | Quote | Single Use | Direct | Standard | 2-Position Normally Open | Self-Recovery (Pressure Differential Return) | DC24V | M | M5 | Sub-Base Plumbing | Linear Motion Spool | 0.016 | - | Plug lead, without connector, with indicator light / surge voltage suppressor | - | 0.35 | ||
MYR 231.75 | 1 Piece(s) | 21 Day(s) | Unit for Manifold Mounting | Manifold Base | Low Vacuum Compatible / Standard / Low Current | 2-Position Normally Closed | Self-Recovery (Spring Return) | DC12V | Barbed Couplers | - | Direct Plumbing | Linear Motion Poppet | 0.011 | Ø3.2 | Plug lead, without connector, with indicator light / surge voltage suppressor | Body ported type stacking manifold type | 0.5 | ||
- | 1 Piece(s) | Quote | Unit for Manifold Mounting | Manifold Base | Low Vacuum Compatible / Standard / Low Current | 2-Position Normally Closed | Self-Recovery (Spring Return) | DC12V | Barbed Couplers | - | Direct Plumbing | Linear Motion Poppet | 0.011 | Ø4 | Plug lead, without connector, with indicator light / surge voltage suppressor | Body ported type stacking manifold type | 0.5 |
Additional Products in this Category
- Control Unit Special Purpose Solenoid Valve Mechanical Valve Round Series
- Master Valve Single Unit Pilot Type 5-Port Valve Selex Valve 4F Series
- L-Axis Slide Bracket Support/Stop
- Stainless Steel, Chamfered Cylinder Knob ST-14
- 5-Port Solenoid Valve, Plug-In / Plug Lead, Single Unit, Base Mounted, VQ4000 Series Valve
- 5-Port Solenoid Valve, Pilot Operated, Elastic Material Seal, VFR3000
- 5-Port Solenoid Valve, Base Mounted, Single Unit, VQZ100/200/300 Series
- 3-Port Solenoid Valve, Pilot Poppet Type, Rubber Seal VG342 Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy