(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Digital Pressure Sensor GS40 Series (GS40-M5B-X202)
[Features]
· Multiple functions
Pressure sensor and switch have been combined, reducing mounting space and labor hours
· Built-in semiconductor sensor and microcontroller
(i)Caution
- Product images may be representative images. Refer to the manufacturer's catalog for details
Part Number
Configured Part Number is shown.
GS40-M5B-X202
Specifications of Digital Pressure Sensor GS40 Series
External appearance of digital pressure sensor GS40 Series
| Model | GS40-M5 | GS40-01 | GS40-02 |
|---|---|---|---|
| Fluid | Air and inert gas | ||
| Hysteresis | 3% F.S. (full span) or less | ||
| Accuracy | ±3%F.S.(＋5～＋40℃), ±5%F.S. (-5～＋60℃) | ||
| Operating voltage | 12 to 24 V DC (Ripple ±10% or less) | ||
| Output | Open collector 30 V, 80 mA or less | ||
| Indicator light | Lights when ON (ON when the pressure drops below the setting value.) | ||
| Current Consumption | 15 mA (24 V DC, when light is ON) or less | ||
| Maximum operating pressure | 0.98 MPa | ||
| Operating temperature range | -5～＋60℃ (No freezing) | ||
| Sampling frequency | 4 Hz | ||
| Bracket | 15501 | - | - |
| Connection port size | M5 × 0.8 (female thread) | R1/8 | R1/4 |
| Weight (g) | 42 | 54 | 57 |
Dimensions
(Units: mm)
External appearance 1 of GS40 Series
Dimensional drawing 2 of GS40 Series
External appearance of M (fixed SI unit) type
Dimensional drawing 3 of GS40 Series
Dimensional drawing of M5 type
Dimensional drawing of R type
Notes
Wiring
- * 1Do not wire when the power is on. If it is short-circuited, the built-in microcomputer will be damaged.
- * 2If the black wire (output wire) touches the power supply or the circuit is shorted, the built-in output transistor will be burned, causing malfunction.
- * 3Do not apply pulling force to the power cord. Doing so may result in breakage.
- * 4Maximum load current is 80 mA. It can be used within the range of 80 mA.
Internal Circuit and Connection
- Brown wire: Connect the wire to the positive (+) side of the DC power supply to operate the switch.
- Black wire: Since it is the output of the switch, connect it to the input terminal of the PLC or a load such as a DC relay.
- Blue wire: Connect the wire to the negative (-) side of the DC power supply to operate the switch.
Wiring examples for relays, resistant loads, etc.
- D1: Reverse connection protection diode
- D2: Surge suppressor (Surge absorption diode)
- D3: Surge suppressor (Surge absorption diode)
- Tr: Output transistor
Mounting/Piping
- * 1The mounting direction can be horizontal or vertical.
- * 2The main body must be kept holding when handling the product.
- * 3Dropping or hitting should be avoided. If an excessive impact is applied, the inside of the switch will be damaged.
- * 4When mounting on a pipe, apply a wrench to the width across flats for R thread types and the square part on the bottom of the body for M5 types and turn the wrench. If stress is applied to the upper part of the body or resin case, internal parts will be stressed and damaged.
- * 5Touching the LCD display should be avoided. Touching the LCD display during operation may cause malfunction or damage to internal parts due to the influence of static electricity.
Pressure setting
Name of each part of GS40 Series
- * 1How to set the pressure switch: While pressing the push button (1) SET, turn the pressure setting trimmer (3) P.SET to display the set pressure on the pressure display plate (4) LCD. (The set pressure is high for clockwise rotation and low for counterclockwise rotation.) After setting the pressure, press the push button (1) SET to display the line side pressure on the pressure display plate (4) LCD.
- * 2Alarm display: The ↓ on the LCD flashes within +10% of the pressure setting value of the pressure switch to inform that the set pressure is approaching. When the line pressure falls below the set pressure, (2) the ALM LED (red) lights up and the switch turns on.
- * 3It can be used within the maximum operating pressure range. If a pressure higher than the maximum operating pressure is applied, the LCD display will show "“OF" and the product cannot be used. In that case, reset the pressure and power supply once.
Operating environment
- * 1It cannot be used in a place where water or oil is scattered. Since it is an open type structure, if water or oil gets inside, the electric circuit will corrode, resulting in malfunction or damage.
- * 2It may be affected by induction noise from piping or noise from power line or high voltage line. As it may cause malfunction or damage to the switch, take measures such as grounding the pipe for inductive noise from the pipe or keeping it away from noise on power lines and high-voltage lines.
- * 3Operating fluids are dedicated for air and inert gas. Fluids cannot be used.
- * 4It must not be used in an atmosphere of flammable liquid or flammable gas. Since it is not explosion proof, it may cause an explosion hazard.
| Part Number |
|---|
| GS40-M5B-X202 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pipe Port Type | Plumbing Thread Type | Plumbing Thread Nominal | Unit Specifications | Bracket | Lead Wire |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,631.53 | 1 Piece(s) | 21 Day(s) | Female Thread | M | M5x0.8 | With unit conversion function | Yes | 5 m |
Loading...
Basic Information
| Type | Pressure Switch | Fluid Type | Air | Sensor, Monitor Structure | Integrated shape |
|---|---|---|---|---|---|
| Output Method | Switch | Fluid Characteristics | Inert | Pressure Type | Standard |
| Operating Temperature Range(°C) | -5::60 | Number of Input Points | 1 | Number of Output Points | 1 |
| Power Supply Type | DC | Power Supply Voltage(V) | 24 | Mounting Holes | No |
| Display | Digital | Drive Component | Analog | Lamp | Presence |
Please check the type/dimensions/specifications of the part GS40-M5B-X202 in the Digital Pressure Sensor GS40 Series series.
Specification/Dimensions
-
type
- GS40
-
Pipe Port Type
- Threads
- Female Thread
- Threads
-
Plumbing Thread Type
- M
- Rc (R)
-
Plumbing Thread Nominal
- M5x0.8
- 1/8
- 1/4
-
Unit Specifications
-
Bracket
-
Lead Wire
- 0.6 m
- 5 m
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| GS40-01 |
| GS40-01-M |
| GS40-01-M-X202 |
| GS40-01-X202 |
| GS40-02 |
| GS40-02-M |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pipe Port Type | Plumbing Thread Type | Plumbing Thread Nominal | Unit Specifications | Bracket | Lead Wire |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 1,436.00 | 1 Piece(s) | 21 Day(s) | [Threads] Male thread | [Rc (R)] R | [1/8] 1/8 | With unit conversion function | None | 0.6 m | ||
MYR 1,436.00 | 1 Piece(s) | 21 Day(s) | [Threads] Male thread | [Rc (R)] R | [1/8] 1/8 | SI unit (MPa) fixed | None | 0.6 m | ||
MYR 1,577.25 | 1 Piece(s) | 21 Day(s) | [Threads] Male thread | [Rc (R)] R | [1/8] 1/8 | SI unit (MPa) fixed | None | 5 m | ||
MYR 1,577.25 | 1 Piece(s) | 21 Day(s) | [Threads] Male thread | [Rc (R)] R | [1/8] 1/8 | With unit conversion function | None | 5 m | ||
MYR 1,436.00 | 1 Piece(s) | 21 Day(s) | [Threads] Male thread | [Rc (R)] R | [1/4] 1/4 | With unit conversion function | None | 0.6 m | ||
MYR 1,436.00 | 1 Piece(s) | 21 Day(s) | [Threads] Male thread | [Rc (R)] R | [1/4] 1/4 | SI unit (MPa) fixed | None | 0.6 m |
Additional Products in this Category
- Small Pressure Sensor, for Positive Pressure, Union Type, Sensor Head
- Compact Pneumatic Pressure Sensor PSE540 Series
- 3-Screen Digital Display Setting Device PSE300AC Series
- Small Pressure Switch ZSE2/ISE2 Series
- 2+ Analog Output 3-Screen Display for General Fluid Digital Pressure Switch, ZSE20C(F) / ISE20C (H)
- 3-Color Display, Digital Flow Switch for Water Rechargeable Battery Compatible 25 A-PF3W Series
- Remote Type Pressure Sensor for Small Pneumatic Clean Series 10-PSE540 Series
- Integrated Water Digital Flow Switch / Manifold Straight Type PF3WC Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy