(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
JT Series Standard/Lightweight And Compact Type Floating Joint
Floating joint compatible with space-saving cylinder (JCM).
[Features]
⋅ Maximum weight reduced by 56%.
· Screw size is the same as the screw size for standard JA Series.
· More compact and lightweight combinations are possible by using the JT Series with a JCM Series cylinder.
· With dustproof cover.
· Operating pressure: pneumatic cylinder.
· Mounting: basic type.
(i)Caution
- Product images may be representative images. Refer to the manufacturer's catalog for details
Japanese Only
Part Number
Configured Part Number is shown.
JT Series Standard/Lightweight And Compact Type Floating Joint Specifications
JT Series Floating Joint external appearance
JT Series Floating Joint operating range
| Model | Nominal thread size | Allowable axial force (N) | Allowable eccentricity U (mm) | Rotating angle (°) | Operating temperature range |
|---|---|---|---|---|---|
| JT20 | M8 × 1.25 | 220 | 0.5 | ±2 | -10 to +70°C |
| JT32 | M10 × 1.25 | 560 | 0.5 | ±2 | |
| JT40 | M14 × 1.5 | 880 | 0.75 | ±2 |
(Standard Type / Pneumatic: Up to 0.7 MPa) Dimensions
(Unit: mm)
JT Series Floating Joint dimensional drawing
| Model | Port size M | A | B | øC | øD | øE | □F | G | Width across flats H | Maximum thread depth P | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JT20 | M8 × 1.25 | 19.2 | 8 | 11 | (25.4) | 23 | 10 | 13.6 | 22 | 9.5 | 22 g |
| JT32 | M10 × 1.25 | 23 | 10 | 13.4 | (30.6) | 28 | 12 | 16.3 | 27 | 11.5 | 38 g |
| JT40 | M14 × 1.5 | 29 | 14 | 19 | (40.4) | 37.4 | 17 | 20.3 | 36 | 15.5 | 98 g |
*Value in ( ) is the dimension when the dust cover is used.
Compatible Cylinder
(Unit: mm)
| Model | Compatible cylinder* | Recommended cylinder | ||
|---|---|---|---|---|
| Bore size | Operating pressure | |||
| JT20 | ø20 (bore size 20 mm) | 0.7 MPa or less | JC□M20 (rod end male thread type) | |
| JT32 | ø25 (bore size 25 mm) | JC□M25 (rod end male thread type) | ||
| ø32 (bore size 32 mm) | JC□M32 (rod end male thread type) | |||
| JT40 | ø40 (bore size 40 mm) | JC□M40 (rod end male thread type) | ||
*Make sure to use a cylinder with a built-in cushion mechanism.
Diagram
JT Series Floating Joint Diagram
| Number | Description | Material | Note |
|---|---|---|---|
| 1 | Stud | Carbon steel | Zinc chromate |
| 2 | Case | Aluminum alloy | Chromate |
| 3 | Socket | Carbon steel | Zinc chromate |
| 4 | Ring | Rolled steel | Nitriding treatment |
| 5 | Slider | Rolled steel | Nitriding treatment |
| 6 | Plate | Rolled steel | Zinc chromate |
| 7 | Dust cover | Synthetic rubber | - |
Replacement part (No. 7 / dust cover) compatible model
- P215420-07: JT20
- P215432-07: JT32
- P215440-07: JT40
Mounting Precautions
- *1Maintenance space
Allow sufficient space for maintenance and inspection. - *2Operate the socket by hand before mounting to ensure it moves smoothly.
The dust cover may stick to the socket. Move the dust cover at the base of the socket with your fingers, or twist the socket right and left gently to free it before mounting. - *3Tighten the product to the appropriate torque for the screw size using an appropriate tool. In addition, apply a locking adhesive.
When connecting the driven object to the cylinder rod with a floating joint, hold the octagonal and square parts with an appropriate wrench and tighten the floating joint to the appropriate tightening torque according to the table below.
The floating joint may be broken or malfunction if parts other than the octagonal or square parts are gripped and rotated with pliers or a wrench, or if it is tightened to an excessive torque.
As a countermeasure against loosening caused by vibration or other reasons, apply locking adhesive. - *4See the manufacturer's catalog for product information other than the above.
Reference drawing for correct mounting of JT Series Floating Joint
- *Tighten with the rod end nut attached to the cylinder.
- *Screw the floating joint all the way to the end face.
| Model | Stud (male thread side) | Socket (female thread side) | ||
|---|---|---|---|---|
| Wrench size (bowl) | Tightening torque | Wrench size (socket) | Tightening torque | |
| JT20 | Width 22 mm | 12 N･m | Width 10 mm | 8 to 12 N･m |
| JT32 | Width 27 mm | 24 N･m | Width 12 mm | 15 to 24 N･m |
| JT40 | Width 36 mm | 68 N･m | Width 17 mm | 40 to 68 N･m |
| Part Number |
|---|
| JT32 |
| JT40 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connecting Thread Nominal M (mm) | Allowable Misalignment U (mm) | Max. Operating Pull Force (kN) | Applicable cylinder bore size (ø) | Applicable cylinder nominal thread |
|---|---|---|---|---|---|---|---|---|---|
MYR 206.15 | 1 Piece(s) | 22 Day(s) | M10 ~ M18 | 0.5 | 0.56 | For ø25, ø32 | M10 × 1.25 | ||
MYR 260.00 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | 0.75 | 0.88 | For ø40 | M14 × 1.5 |
Loading...
Basic Information
| Type | Floating Joints | Connection Type, Cylinder Side | Threaded | Connection Type, Work Piece Side | Tapped |
|---|---|---|---|---|---|
| Applicable Cylinder | Air Cylinder | Connecting Thread Nominal P(mm) | 1~1.75 | Main Body Material | Carbon steel |
| Allowable Angular Deviation(deg) | ±2 | Metallic Head | No | Stud Material | Steel |
| Operating Temperature Range(°C) | -10::70 |
Specification/Dimensions
-
Allowable Misalignment U(mm)
-
Applicable cylinder bore size(ø)
- For ø20
- For ø25, ø32
- For ø40
-
Applicable cylinder nominal thread
- M8 × 1.25
- M10 × 1.25
- M14 × 1.5
-
type
- JT
-
Connecting Thread Nominal M(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 22 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Floating Joints Integrated Type - Screw-In
- Holder - Top Mount, Flange Type
- Holder - Bottom Mount, Flange Type
- Floating Joints - T Slots Mounted Holder - Pilot Type - Tapped
- Floating Joint - Ultra Short Type Male Thread Mounting - Male Thread
- Floating Joints Integrated Type - Round / Compact Type - Tapped
- Floating Joints Integrated Type - Round / Compact Type - Threaded
- Floating Joint, Heavy Load Type JAH Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy