(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that some of the items may take longer lead time to ship due to Japan New Year holidays (29-Dec-2024 to 5-Jan-2025). Early order placement is recommended. We apologize for the inconvenience caused and appreciate your kind understanding. [Details]
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Floating Joint, Light Weight Type For Light Load JC Series
[Features]
· Use of a lightweight aluminum case has reduced the weight by 30% (compared to JA40)
· Quality suitable for air cylinders
· Absorbs any misalignment between the workpiece and the cylinder
· Mounting is interchangeable with the current JA series
(i)Caution
- Product images may be representative images. Refer to the catalog for details.
Part Number
Configured Part Number is shown.
JC63-16-200
JC Series Floating Joint, Light Weight Type For Light Load Specifications
JC Series Floating Joint external appearance
JC Series Floating Joint operating range
| Model | Application Cylinder tube bore size (mm) | Compatible cylinder nominal thread size | Maximum operating tension and compression force (N) | Allowable eccentricity U (mm) | Rotating angle |
|---|---|---|---|---|---|
| Basic type | |||||
| Standard / Thread nominal size | |||||
| JC20-8-125 | 20 | M8 × 1.25 | 300 | 0.5 | ±5 ° |
| JC30-10-125 | 25, 32 | M10 × 1.25 | 800 | 0.5 | |
| JC40-14-150 | 40 | M14 × 1.5 | 1,250 | 0.75 | |
| JC63-18-150 | 50/63 | M18 × 1.5 | 3,100 | 1 | |
| Semi-standard / Thread nominal size | |||||
| JC20-8-100 | 20 | M8 × 1 | 300 | 0.5 | ±5 ° |
| JC25-10-150 | 25 | M10 × 1.5 | 800 | 0.5 | |
| JC32-10-100 | 32 | M10 × 1 | 800 | 0.5 | |
| JC40-12-125 | 32/40 | M12 × 1.25 | 1,250 | 0.75 | |
| JC40-12-150 | 40 | M12 × 1.5 | 1,250 | 0.75 | |
| JC40-12-175 | 32/40 | M12 × 1.75 | 1,250 | 0.75 | |
| JC50-16-150 | 50 | M16 × 1.5 | 3,100 | 1 | |
| JC63-16-200 | 50/63 | M16 × 2 | 3,100 | 1 | |
(Standard Type / Pneumatic: Up to 1 MPa) Dimensions
(Unit: mm)
JC Series Floating Joint dimensional drawing
| Model | Application cylinder bore size | M | A | B | D | E | F | G | H | Center of sphere R | Maximum thread depth P | Allowable eccentricity U | Maximum operating tensile and compressive force N | Weight kg | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal diameter | Pitch | ||||||||||||||
| JC20-8-125 | 20 | 8 | 1.25 | 44 | 17.5 | 21 | 4.5 | 7 | 7 | 13 | 30.5 | 8 | 0.5 | 300 | 0.03 |
| JC30-10-125 | 25/32 | 10 | 1.25 | 49.5 | 19.5 | 24 | 5 | 8 | 8 | 17 | 34 | 9 | 0.5 | 800 | 0.05 |
| JC40-14-150 | 40 | 14 | 1.5 | 60 | 20 | 31 | 6 | 11 | 11 | 22 | 38 | 13 | 0.75 | 1,250 | 0.12 |
| JC63-18-150 | 50/63 | 18 | 1.5 | 74.5 | 25 | 41 | 7.5 | 14 | 13.5 | 27 | 47.5 | 15 | 1 | 3,100 | 0.23 |
Diagram
JC Series Floating Joint Diagram
| Number | Description | Material | Note |
|---|---|---|---|
| 1 | Stud | Steel | Manganese phosphate |
| 2 | Case | Aluminum | Chromate |
| 3 | Ring | Steel | - |
| 4 | Cap | Steel | Black zinc chromated |
| 5 | Dust cover | Synthetic rubber | - |
| 6 | Set screw | Steel | Zinc chromate |
| 7 | Rod end nut | Steel | Zinc chromate |
| 8 | Washer | Steel | - |
Rod-end Nut (Accessory) dimensional drawing
(Unit: mm)
Rod-end nut dimensional drawing
| Model | d: thread nominal size | H | B | C |
|---|---|---|---|---|
| JC20-8-100 | M8 × 1 | 5 | 13 | 15 |
| JC20-8-125 | M8 × 1.25 | 5 | 13 | 15 |
| JC32-10-100 | M10 × 1 | 6 | 17 | 19.6 |
| JC30-10-125 | M10 × 1.25 | 6 | 17 | 19.6 |
| JC25-10-150 | M10 × 1.5 | 6 | 17 | 19.6 |
| JC40-12-125 | M12 × 1.25 | 7 | 19 | 21.9 |
| JC40-12-150 | M12 × 1.5 | 7 | 19 | 21.9 |
| JC40-12-175 | M12 × 1.75 | 7 | 19 | 21.9 |
| JC40-14-150 | M14 × 1.5 | 8 | 22 | 25.4 |
| JC50-16-150 | M16 × 1.5 | 10 | 24 | 27.7 |
| JC63-16-200 | M16 × 2 | 10 | 24 | 27.7 |
| JC63-18-150 | M18 × 1.5 | 11 | 27 | 31.2 |
Precautions
- *When screwing the male threads of the rod into the female threads of the socket or the case, make sure that the rod does not bottom out.
- *The dust cover may stick to the stud. Move the dust cover at the base of the stud with your fingers, or twist the stud right and left gently to free it.
- *When using a floating joint to connect the cylinder rod to a driven body, secure it in place by applying a torque that is appropriate for the thread size. Also, if there is a risk of loosening during operation, take measures to prevent loosening, such as using a locking pin or thread adhesive.
- *This product is dedicated to linear motion. The threaded portion can be rotated, but this product is not a rotary joint. It cannot be used for rotational applications.
- *Use the product at 25% or less of the allowable kinetic energy of the cylinder. *Be sure to use the cushion mechanism of the cylinder or a buffer mechanism such as a shock absorber to prevent impact force being applied to the floating joint when stopping the driven body. If there is no buffer mechanism, an impact force is generated that may cause the floating joint to exceed its maximum tensile and compressive force level, leading to breakage.
- *Do not use if the product has been disassembled. High-strength adhesive is applied to the portion of the connection that is threaded to prevent it from loosening. The product must therefore not be disassembled. If the product is forcefully disassembled, it could lead to damage.
- *See the manufacturer's catalog for product information other than the above.
| Part Number |
|---|
| JC63-16-200 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connecting Thread Nominal M (mm) | Connecting Thread Nominal P (mm) | Allowable Misalignment U (mm) | Max. Operating Pull Force (kN) | Applicable cylinder bore size (ø) | Applicable cylinder nominal thread |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 472.80 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | 2~2.5 | 1 | 3.1 | 50/63 | M16 × 2 |
Loading...
Basic Information
| Type | Floating Joints | Connection Type, Cylinder Side | Tapped | Connection Type, Work Piece Side | Threaded |
|---|---|---|---|---|---|
| Applicable Cylinder | Air Cylinder | Main Body Material | Steel | Allowable Angular Deviation(deg) | ±5 |
| Metallic Head | No | Stud Material | Steel | Operating Temperature Range(°C) | -10::70 |
Please check the type/dimensions/specifications of the part JC63-16-200 in the Floating Joint, Light Weight Type For Light Load JC Series series.
Specification/Dimensions
-
Connecting Thread Nominal M(mm)
-
Allowable Misalignment U(mm)
-
Applicable cylinder bore size(ø)
- 20
- 25
- 25/32
- 32
- 32/40
- 40
- 50
- 50/63
-
Applicable cylinder nominal thread
- M8 × 1
- M8 × 1.25
- M10 × 1
- M10 × 1.25
- M10 × 1.5
- M12 × 1.25
- M12 × 1.5
- M12 × 1.75
- M14 × 1.5
- M16 × 1.5
- M16 × 2
- M18 × 1.5
-
type
- JC
-
Connecting Thread Nominal P(mm)
- 1~1.75
- 2~2.5
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 31 Day(s) or Less
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| JC20-8-125 |
| JC25-10-150 |
| JC30-10-125 |
| JC32-10-100 |
| JC40-12-125 |
| JC63-18-150 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connecting Thread Nominal M (mm) | Connecting Thread Nominal P (mm) | Allowable Misalignment U (mm) | Max. Operating Pull Force (kN) | Applicable cylinder bore size (ø) | Applicable cylinder nominal thread |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 227.33 | 1 Piece(s) | 32 Day(s) | M3 ~ M8 | 1~1.75 | 0.5 | 0.3 | 20 | M8 × 1.25 | ||
MYR 284.28 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | 1~1.75 | 0.5 | 0.8 | 25 | M10 × 1.5 | ||
MYR 240.13 | 1 Piece(s) | 32 Day(s) | M10 ~ M18 | 1~1.75 | 0.5 | 0.8 | 25/32 | M10 × 1.25 | ||
MYR 284.28 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | 1~1.75 | 0.5 | 0.8 | 32 | M10 × 1 | ||
MYR 365.07 | 1 Piece(s) | 31 Day(s) | M10 ~ M18 | 1~1.75 | 0.75 | 1.25 | 32/40 | M12 × 1.25 | ||
MYR 417.17 | 1 Piece(s) | 21 Day(s) | M10 ~ M18 | 1~1.75 | 1 | 3.1 | 50/63 | M18 × 1.5 |
Additional Products in this Category
- Floating Joints, Quick Connection Type - Sheet Metal Holder Set
- Floating Joints, Quick Connection Type - Bolt Mount Type
- Holder - Compact
- Floating Joints, Flange Mounting - Slide
- Floating Joints, Quick Connection Type - Circular Type
- Floating Joints - T Slots Mounted Holder - Pilot Type - Threaded
- Floating Joints Flange Mounting - Threaded - Standard Type / Space Saving Type
- Floating Joints Integrated Type - Round / Compact Type - Threaded
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy