(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Normally Closed Type High Vacuum Solenoid Valve XSA Series (XSA1/XSA2/XSA3) (XSA1-11P-5D2)
A normally closed type high vacuum solenoid valve with reduced particulate matter and improved sealing performance.
[Features]
・ Flame-retardant (UL94 V-0 compliant)
・ Two types of fittings (face seal fittings / compression fittings) and female threads (Rc, NPT) are available
・ By moving the spring from the sliding part of the armature to the body part, dust generation due to contact with the spring has been reduced
・ Securely seals with a large spring force
・ Power consumption *: 4.5 W (size 1) / 7 W (size 2) / 10.5 W (Size 3) (* For DC specifications / B type. )
・ Operating temperature range: 5 to 60℃
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details. - The product images may be representative images only. Refer to the manufacturer's catalog for shape details.
Part Number
Configured Part Number is shown.
XSA1-11P-5D2
Normally Closed Type High Vacuum Solenoid Valve XSA Series Specifications
Face seal fitting appearance
A fitting with a high sealing performance in everything from vacuum pressure to positive pressure that forms a seal by placing a metal gasket at the end of the sleeve and the tightening of the nut.
Compression fitting external appearance
A self-aligning tube fitting that uses ferrule rings which align and connect with the tubing when the nut is tightened.
Female thread (Rc, NPT) external appearance
| Model | XSA1-11 XSA1-12 | XSA1-21 XSA1-22 | XSA2-22 | XSA2-32 | XSA2-43 Note 3: | XSA3-32 XSA3-33 | XSA3-43 | |
|---|---|---|---|---|---|---|---|---|
| Action | Normally closed | |||||||
| Fluids | Air, inert gas | |||||||
| Orifice Diameter (mm) ø | 2 | 3 | 4.5 | 6 | 4.5 | 6 | ||
| Withstand Pressure MPa (G) | 1.5 | |||||||
| Minimum Operating Pressure Pa (abs) / OUT Side | 1 × 10-6 | |||||||
| Maximum Operating Pressure MPa (G) / IN Side | 1.0 | |||||||
| Maximum Operating Pressure Differential MPa Note 1: | 0.8 | 0.3 | 1.0 | 0.3 | 0.1 | 0.8 | 0.3 | |
| Reverse Pressure Potential MPa (G) Note 2: | 0.5 | 0.25 | 0.4 | 0.2 | 0.05 | 0.2 | 0.15 | |
| Amount of leakage Pa·m3/s Note 4: | Internal | 1.3 × 10-9 | ||||||
| External | 1.3 × 10-11 | |||||||
| Piping Connection Method | Face seal fitting / compression fitting / (Rc, NPT) female thread | |||||||
| Connection Size | Face Seal Fitting (Inches) Compression Fitting (Inches) | 1/4 | 3/8 | 1/4 | 3/8 | |||
| (Rc, NPT) female thread | 1/8 | 1/4 | - | 3/8 | ||||
| Ambient Temperature and Operating Fluid Temperature (°C) | 5 to 60 | |||||||
| Rated Voltage Note 5: | 100/110/200/220/230/240/24/48 V AC, 12/24 V DC | |||||||
| Power Consumption (W) Note 6: | DC | 4.5 | 7 | 10.5 | ||||
| Apparent Power (VA) Note 6: | AC | 7 | 9.5 | 12 | ||||
| Coil Temperature Rise (°C) Note 7: | DC | 50 | 55 | 65 | ||||
| AC | 60 | 70 | 70 | |||||
| Allowable Voltage Fluctuation | ±10% or less of rated voltage | |||||||
| Allowable Leakage Voltage | DC | 2% or less of rated voltage | ||||||
| AC | 5% or less of rated voltage | |||||||
| Coil Insulation Type | Class B | |||||||
| Weight kg Note 8: | Face Seal Fitting | 0.28 | 0.41 | 0.42 | 0.53 | 0.62 | ||
| Compression Fitting | 0.28 | 0.41 | 0.42 | 0.53 | 0.55 | |||
| (Rc, NPT) female thread | 0.33 | 0.53 | - | 0.74 | 0.74 | |||
Note 1: The operating pressure differential is the difference between port 1 (high pressure side) and port 2 (low pressure side).
Example: At 0.3 MPa, port 2 is vacuumed (1 Torr or less), while port 1 can be pressurized up to 0.2 MPa (G).
Note 2: The reverse potential pressure indicates the pressure which can be applied from port 2 when port 1 is at atmospheric pressure.
Note 3: Face seal fitting / compression fitting only.
Note 4: Amount of leakage when the ambient temperature is at 20°C and there is 0.1 MPa of differential pressure (gas permeation not included).
Note 5: AC types are all equipped with a full-wave rectifier.
Note 6: Power consumption and apparent power are values at an ambient temperature of 20°C and with rated voltage applied. (Variation range: ±10%)
Note 7: Value at an ambient temperature of 20°C and with rated voltage applied. However, this value depends on the ambient environment.
Note 8: This value is for the grommet type.
Face Seal Fitting / Compression Fitting Flow Rate Characteristics
| - | XSA1-12 | XSA1-22 | XSA2-22 | XSA2-32 | XSA2-43 | XSA3-32 | XSA3-43 | |
|---|---|---|---|---|---|---|---|---|
| Flow Rate Characteristics | C [dm3/(s·bar)] | 0.55 | 1.07 | 1.07 | 1.51 | 2.78 | 1.54 | 2.89 |
| b | 0.41 | 0.36 | 0.34 | 0.24 | 0.21 | 0.24 | 0.21 | |
Female Thread (Rc, NPT) Flow Rate Characteristics
| - | XSA1-11 | XSA1-21 | XSA2-22 | XSA2-32 | XSA3-33 | XSA3-43 | |
|---|---|---|---|---|---|---|---|
| Flow Rate Characteristics | C [dm3/(s·bar)] | 0.54 | 1.14 | 1.14 | 2.23 | 2.37 | 3.50 |
| b | 0.36 | 0.39 | 0.42 | 0.38 | 0.40 | 0.15 | |
Face Seal Fitting and Compression Fitting Drawing
(Unit: mm)
Grommet: G dimensional drawing (lower left: no spacer / lower right: with spacer)
Grommet: GS dimensional drawing
Conduit: C dimensional drawing
Flat terminal: F dimensional drawing (left: terminal)
DIN terminal: D dimensional drawing
Terminal: T dimensional drawing
| Model | A | B | Bs | C | D | E | F | L | M | P [inch] |
|---|---|---|---|---|---|---|---|---|---|---|
| XSA1-□2S | 22 | 55 | 24 | 63 | 30 | 8.5 | 20 | 3 | 8 | 1/4 |
| XSA1-□2V | 50 | - | ||||||||
| XSA2-□2S | 25 | 63 | 31.5 | 73.5 | 35 | 11.5 | 22 | 5 | 10 | |
| XSA2-□2V | 56 | - | ||||||||
| XSA2-43S | 64.5 | 31 | 3/8 | |||||||
| XSA2-43V | 67 | - | 78 | |||||||
| XSA3-32S | 63 | 31.5 | 40 | 24.5 | 1/4 | |||||
| XSA3-32V | 56 | - | ||||||||
| XSA3-43S | 64.5 | 31 | 3/8 | |||||||
| XSA3-43V | 67 | - | 82.5 |
| Model | Grommet: G | Grommet: GS | Conduit: C | Flat Terminal: F | DIN Terminal: D | Terminal: T | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G | H | G | H | G | H | G | H | G | H | J | G | H | J | |
| XSA1-□2S | 27 | 53.5 | 30 | 40 | 47.5 | 47.5 | 23 | 53.5 | 64.5 | 45.5 | 52.5 | 99.5 | 47.5 | 68.5 |
| XSA1-□2V | ||||||||||||||
| XSA2-□2S | 29.5 | 63 | 32.5 | 49.5 | 50 | 57 | 25.5 | 63 | 67 | 55 | 55 | 102 | 57 | 71 |
| XSA2-□2V | ||||||||||||||
| XSA2-43S | ||||||||||||||
| XSA2-43V | 67.5 | 54 | 61.5 | 67.5 | 59.5 | 61.5 | ||||||||
| XSA3-32S | 32 | 35 | 52.5 | 28 | 69.5 | 57.5 | 104.5 | 73.5 | ||||||
| XSA3-32V | ||||||||||||||
| XSA3-43S | ||||||||||||||
| XSA3-43V | 72 | 58.5 | 66 | 72 | 64 | 66 | ||||||||
Product Structure/Operation
Structure and operation of normally closed type high vacuum solenoid valve, XSA Series
| Number | Name | Material |
|---|---|---|
| 1 | Solenoid Coil | Cu + Fe + resin |
| 2 | Fixed Iron Core | Fe |
| 3 | Tube | SUS* |
| 4 | Residual (Seat) | PET* |
| 5 | Movable Armature Iron Core Assembly’ | FKM, SUS, resin (PPS)* |
| 6 | Spring | SUS* |
| 7 | Body | SUS* |
| 8 | O-ring | FKM* |
| 9 | Spacer | Al |
- *Parts in contact with gas
Options Descriptions
(9) Spacer (face seal fitting / compression fitting only): The spacer is used to raise the body when fastening it onto a flat area.
Working Principle
By energizing the solenoid coil (1), the armature movable iron core assembly’ (5) overcomes the composite force, which consists of the force acting on the poppet due to differential pressure and the reactive force of the spring (6), and is suctioned to the fixed iron core (2), thus opening the poppet.
When the energization of the solenoid coil (1) is stopped, the armature movable iron core assembly’ (5) separates from the fixed iron core (2) under the reactive force of the spring (6), thus closing the poppet.
Notes
- *Cannot be used for emergency shut-off valves, etc. The valve described in the catalog is not designed to be used as a safety valve such as an emergency shut-off valve. For such systems, take other measures that will reliably secure safety.
- *Long-term continuous energization will cause the solenoid coil to generate heat. Avoid use in airtight containers. Install in locations with good ventilation. Do not touch the solenoid valve during or immediately after energization.
- *Refer to the manufacturer's catalog for product information not detailed above.
| Part Number |
|---|
| XSA1-11P-5D2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pipe Port Type | Plumbing Thread Nominal | Voltage | Electrical Entry Method | Orifice Diameter (ø) | Spacer | Valve size | Electrical Entry Direction (°) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | [Rc] Rc | 1/8 | DC24V | DIN terminal (with surge voltage suppressor) | 2 | None | Size 1 | None |
Loading...
Basic Information
| Type | High Vacuum Solenoid | Application | Single Use | Mounting Orientation | Direct |
|---|---|---|---|---|---|
| Number of Ports | 2-Port Valve | Solenoid Type | Single | Switching Type | 2-Position Normally Closed |
| Driving Type | Directly Operated | Seal Type | Bellows Seal |
Please check the type/dimensions/specifications of the part XSA1-11P-5D2 in the Normally Closed Type High Vacuum Solenoid Valve XSA Series (XSA1/XSA2/XSA3) series.
Specification/Dimensions
-
type
- XSA1
- XSA2
- XSA3
-
Pipe Port Type
- Rc
- NPT
- Face Seal Fitting
- Compression Fitting
- Rc
-
Plumbing Thread Nominal
- 1/8
- 1/4
- 3/8
-
Voltage
- DC12V
- DC24V
- AC100V
- AC200V
- AC110V
- AC220V
- AC240V
- AC24V
- AC230V
- 48 V AC
- AC110V
- AC220V
-
Electrical Entry Method
- Conduit (with surge voltage suppressor)
- DIN terminal (With surge voltage suppressor)
- DIN terminal (with surge voltage suppressor)
- DIN terminal with lamp (with surge voltage circuit)
- DIN terminal with light (with surge voltage suppressor)
- DIN terminal without connector (with surge voltage suppressor)
- Flat terminal
- Grommet
- Grommet (With surge voltage suppressor)
- Grommet (with surge voltage suppressor)
- Terminal (with surge voltage suppressor)
- Terminal with light (with surge voltage suppressor)
-
Orifice Diameter(ø)
- 2
- 3
- 4.5
- 6
-
Spacer
- None
- With spacer
-
Valve size
- Size 1
- Size 2
- Size 3
-
Electrical Entry Direction(°)
- 90
- 180
- 270
- None
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 21 Day(s) or Less
- 27 Day(s) or Less
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| XSA1-11N-5F2 |
| XSA1-11N-5G2 |
| XSA1-11P-1DL2 |
| XSA1-11P-5DL2 |
| XSA1-11P-5G2 |
| XSA1-11P-5GS2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Pipe Port Type | Plumbing Thread Nominal | Voltage | Electrical Entry Method | Orifice Diameter (ø) | Spacer | Valve size | Electrical Entry Direction (°) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | [NPT] NPT | 1/8 | DC24V | Flat terminal | 2 | None | Size 1 | None | ||
MYR 1,362.72 | 1 Piece(s) | 21 Day(s) | [NPT] NPT | 1/8 | DC24V | Grommet | 2 | None | Size 1 | None | ||
- | 1 Piece(s) | Quote | [Rc] Rc | 1/8 | AC100V | DIN terminal with light (with surge voltage suppressor) | 2 | None | Size 1 | None | ||
- | 1 Piece(s) | Quote | [Rc] Rc | 1/8 | DC24V | DIN terminal with light (with surge voltage suppressor) | 2 | None | Size 1 | None | ||
- | 1 Piece(s) | Quote | [Rc] Rc | 1/8 | DC24V | Grommet | 2 | None | Size 1 | None | ||
- | 1 Piece(s) | Quote | [Rc] Rc | 1/8 | DC24V | Grommet (with surge voltage suppressor) | 2 | None | Size 1 | None |
Additional Products in this Category
- Control Equipment Standard Electromagnetic Valve 112 Series Vacuum Compatible
- Vacuum switch valve unit MPV3 series
- High-Vacuum Angle Valve (Multi-Action / Single-Action)
- Motor-Driven Butterfly Valve MBV-LDⅡ-MP Series
- Aluminum High Vacuum Angle Valves, Normally Closed, Bellows Seal, XLA Series
- Aluminum High Vacuum Angle Valve, XLDV Series, Air-Operated Type With Solenoid Valve
- Aluminum High Vacuum Angle Valve XLS Series (Electromagnetic Type, Bellows Pressure Balance)
- Stainless Steel High Vacuum L-Shaped, Straight Valve, Two-Stage Control, Single Acting, Bellows, O-Ring Seal, XMD/XYD
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy